• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.12
• /
• pp.9-19
• /
• 1997

This paper describes the design and FPGA implementation of a system control unit within a multiprocessor chip which can be used as a node processor ina massively parallel processing (MPP) caches, memory management units, a bus unit and a system control unit. Major functions of the system control unit are locking/unlocking of the shared variables of protected access, synchronization of instruction execution among four integer untis, control of interrupts, generation control of processor's status, etc. The system control unit was modeled in very high level using verilog HDL. Then, it was simulated and verified in an environment where trap handler and external interrupt controller were added. Functional blocks of the system control unit were changed into RTL(register transfer level) model and synthesized using xilinx FPGA cell library in synopsys tool. The synthesized system control unit was implemented by Xilinx FPGA chip (XC4025EPG299) after timing verification.

• The KIPS Transactions:PartA
• /
• v.12A no.5 s.95
• /
• pp.433-440
• /
• 2005

The sharing of objects for authoring frequently occurs among participating users in a cooperative authoring system where many users can collaborate. Floor control is therefore needed not only for minimizing the race condition during object accesses but also for ensuring the exclusive use of objects. h floor is a temporary access right that is given to a participating user who wants to use a shared object. Although the floor control methods for a single session environment can be found in various literature, those methods for a multi-session environment can hardly be found. In a multi-session environment, an object can be shared by multiple sessions. As a solution to the problems due to object sharing in such an environment, this paper presents a floor control method based on the chair-of-chair guidance. This method is an extension of those based on traditional chair guidance; the chair-of-chair elected among session chairs exists in this method.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.04a
• /
• pp.231-238
• /
• 2000

The distributed digital control system has many shared common components, and a single fault in the system may have effects on not a single function. Not as in an analog system, the faults in a digital system usually make discrete and abrupt changes in its output, which are hard to be expected. To cope with these situations, the fault-tolerance is an inevitable property of a distributed control system. A distributed digital control system consists of many equipments, and each equipment can be implemented by many different technologies. The fault-tolerance has to be implemented depend-ing on the overall architecture and how each equipment is implemented. The paper analyzes and compares the strategies and tactics to add the fault-tolerances in a distributed digital control system, and studies how they can be combined appropriately.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.179.3-179
• /
• 2001

This paper describes the dual system technology of PC based control system at steel plant. Because PC is developed to be used in wide area such as Office Automation, Personal, It is cheaper and more portable than the present process control system, but is less stable and less reliable. In this research, We gathered the fault example of a general process control system and steel process control system, analyzed the cause of fault and decided the target fault that took over in our proposed system. The proposed PC based system is the dual system that has a shared RAID system connected by SCSI bus between two systems. In order to assist system reliability, we proposed watchdog manager to monitor ...

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.4
• /
• pp.350-357
• /
• 2002

Optimal control algorithms for the full storage ice cooling system were developed by using a dynamic simulation program. Control algorithms for the storage charging mode were developed for the chiller outlet temperature setpoint control and the chiller capacity control. Control algorithms for the storage discharging mode were developed for the proper mode selection, the storage-only mode control, and the storage-priority chiller-shared mode control. Two different cases of the expected outdoor air temperature profile and the expected cooling load profile were used to analyze the effectiveness of these algorithms. Simulation results show the energy savings and the satisfactory controls of the ice storage system. Therefore, control algorithms developed for this study may effectively be used for the improved control of the ice storage cooling system.

• The KIPS Transactions:PartD
• /
• v.15D no.4
• /
• pp.441-450
• /
• 2008

Recently, access control on form-based web information systems has become one of the useful methods for implementing client systems in a service-oriented architecture. In particular, XForms language is being adopted in many systems as a description language for XML-based user interfaces and server interactions. In this paper, we propose an efficient algorithm for the evaluation of XPath-based access rules for XForms pages. In this model, an XForms page is a sequence of queries and the client system performs user interface realization along with XPath rule evaluations. XPath rules have instance-dependent predicates, which for the most part are shared between rules. For the efficient evaluation of shared predicate expressions in access control rules, we proposed a predicate graph model that reuses the previously evaluated results for the same context node. This approach guarantees that each predicate expression is evaluated for the relevant xml node only once.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.223-224
• /
• 2012

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.488-491
• /
• 1997

The PMGS(Plant Model Generating System) was developed based on modular modeling method and fluid network calculation concept. Fluid network calculation is used as a method of real-time computation of fluid network, and the module which has a topology with node and branch is defined to take advantages of modular modeling. Also, the database which have a shared memory as an instance is designed to manage simulation data in real-time. The applicability of the PMGS was examined implementing the HRSG(Heat Recovery Steam Generator) control logic on DCS.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.1
• /
• pp.121-129
• /
• 2017

In this study, we investigated a cooperative control system of assembly robots using wireless LAN. We developed two different types of robots to assemble three blocks on a workbench. Robot1 can assemble blocks on a workbench and Robot2 can carry blocks to Robot1. We constructed an ROS-based communication system and shared data. Three blocks and one workbench were recognized by camera-image processing By developing the UI using Windows programming language Visual C#, we evaluated the status of the robots and blocks and controlled the robots. The control system was developed by constructing all elements necessary for cooperative control, such as robot design and fabrication, motor control, ROS-based communication, and image processing. Thus, we completed fundamental tasks required for assembly.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.183-190
• /
• 2005

In this thesis, first, we propose I-frame encryption techniques of video data for video data itself encryption and propose license agent that processing user's certification and decryption in client system automatically when user execute encrypted video data in system server. License agent runs user's certification, encryption and decryption of video data based on PID(Public Key Infrastructure) using shared key-pool when execute of video data. Also, compose duplex buffer control and propose real time decryption method using efficient buffer scheduling to reduce much playing delay times that happen processing decryption when execute of videoa data of high-capacity.