• The Research Journal of the Costume Culture
• /
• v.13 no.6 s.59
• /
• pp.896-909
• /
• 2005

In need of studies on the kinds and structure of thread, the biggest variable factor in knitwear patterns, this study attempts: to examine the physical properties by thread type to basically establish systematic data in order to utilize various mixture and structure of yarn and to contribute to the development of optical patterns by building a systemic and scientific methods to produce knit wear patterns though a statistical analysis of the relation between the variations and physical properties. The results is as follows: with time, a feature of knit, which causes instability making it difficult to maintain the original shape, related to material properties, the weight and expansibility recovery rate have the greatest influence on the variation of wale lengths, though the amount varies by material. The variation of course contraction is closely related to density, the dense fabrics showing the highest values, due to the bust of the human body, the wale length variation of the front is greater than that of the back, by a regression analysis of material properties and the variations is obtained showing the weight, density and expansibility recovery rate have the greatest influence on the wale extension and course contraction of knit.

• Journal of the Korean Home Economics Association
• /
• v.18 no.4
• /
• pp.31-39
• /
• 1980

The basic pattern of skirt should be functional in addition to be fit the body. The author paid special attention to the expansion and contraction of the shell which were made the lower trunk and thigh caused by sitting motions. The replicas of the shell were taken by using a gypsum method on 1 female under 4 standardized motions; standing motion, (basic motion), sitting on the chair with flextion 90' at the hip and the knee joints sitting with dropping knees, and sitting with benting legs side wards. Those replicas obtained were developed to the patterns and changes in shape and area of those were measured. Typical displacement and transformation of the shell surface patterns were showed geographycally fig 5-1 to 5-4. mean values of expansion and constriction were obtained by measuring the shell surface on 60 female under the 4 motions. the mean values of it were showed numerically in Table 1-1 to 1-3. The following results were obtained; 1. Vertical constriction of front of the shell were observed near sulcus in guinalis, and vertical extension were near the knees. Horizontal extension were observed near the thighs and the knees. 2. Vertical constrictions of the back of the shell were observed near the knees. It seemed to be influnced the flexion angles of knee points. vertical extension were near gluteus and thighs. Horizontal constriction were small, and horizonlal extension were near gluteus. 3. The high rates of constriction and extension were found near sulcus in guinalis, glutes, and knees. 4. The rates of constriction and extension on the waist line were very low. 5. The highest values of constriction and extension were found in hip and knees.

• Journal of Korean Medical classics
• /
• v.13 no.1
• /
• pp.74-101
• /
• 2000

Geungyul(根結) means roots and nodes of meridians. If human body gets damaged by energy which each seasons has, the meridians get some troubles. Healing for symptom, meridians consist of root, stay, follow, inpouring and node of acupuncture points should be in harmony. 1. This chapter explain roots and node parts of each meridian, acupuncture points name and root, stay, follow, inpouring of acupuncture points which in arm and leg of three Yin and Yang. 2. The opening, closing, axis function, the symptom, and the needling of both meridians of Yin and Yang are explained. 3. The method that predicts the rise-and-fall of visceral energy and the time of death by using an order of pulse and intermittent pulse is explained. 4. It is explained that since the physical condition of the rich and the poor are different, the method using a needling for each person to be healed, such as the deep-and-shallow and the quick-and-slow, are different. 5. It is explained that the excess and the deficiency in the energy of shape should be considered when a acupuncture is given.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.4
• /
• pp.61-69
• /
• 2022

The function of coolant in machining is to reduce the frictional force in the contact area in between the tool and the material, and to increase the precision by cooling the work-piece and the tool, to make the machining surface uniform, and to extend the tool life. However, cutting oil is harmful to the human body because it uses chlorine-based extreme pressure additives to cause environmental pollutants. In this study, the effect of cutting temperature and surface roughness of titanium alloy for medical purpose (Ti-6Al-7Nb) in eco-friendly ADL slot shape machining was investigated using the response surface analysis method. As the design of the experiment, three levels of cutting speed, feed rate, and depth of cut were designed and the experiment was conducted using the central composite planning method. The regression expressions of cutting temperature and surface roughness were respectively obtained as quadratic functions to obtain the minimum value and optimal cutting conditions. The values from this formula and the experimental values were compared. As a result, this study makes and establishes the basis to prevent environmental pollution caused by the use of coolant and to replace it with ADL (Aerosol Dry Lubricant) machining that uses a very small amount of vegetable oil with high pressure.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.283-284
• /
• 1998

The Virtual Reality Technology makes you feel like you are in the situation which has been made up by using the information inputted through the device which is connected with the body part. If the image which is taken from CT, MRI is reorganized in 3D, it can present the shape of the human organ more clearly. So It is more likely to be used in the operation which needs the diversified examination about mutual relation with each part in a place of 3D or confirmation of the planed information. We developed the Technology which can reorganize the image from the CT into the 3D data and represent the 3D movement of the finger according to the hand.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.4
• /
• pp.40-46
• /
• 2006

The market of programmable implantable pumps has bound to a monopolistic situation, inducing high device costs, thus making them inaccessible to most patients. Micro-mechanical and medical innovations allow improved performances by reducing the dimensions. This affects the consumption and weight, and, by reducing the number of parts, the cost is also affected. This paper presents the procedure followed to design an innovative implantable drug delivery system. This drug delivery system consists of a low flow pump which shall be implanted in the human body to relieve pain. In comparison to classical known solutions, this pump presents many advantages of high interest in both medical and mechanical terms. The first section of the article describes the specifications which would characterize a perfect delivery system from every points of view. This concerns shape, medication, flow, autonomy, biocompatibility, security and sterilization ability. Afterwards, an overview of existing systems is proposed in a decisional tree. Positive displacement motorized pumps are classified into three main groups: the continuous movement group, the fractioned translation group and the alternative movement group. These systems are described and the different problems which are specific to these mechanisms are presented. Since none of them fully satisfy the specifications, an innovation is justified.. The decisional tree is therefore extended by adding new principles: fractioned refilling and fractioned injection within the fractioned translation movement group, spider guiding system within the alternative translation movement group, rotational bearing guided device and notch hinge guided device in the alternative rotation movement group.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.3
• /
• pp.47-52
• /
• 2021

Fine dust generated from vehicle brakes accounts for a significant amount of fine dust from non-exhaust system. Since such brake fine dust contains a large number of heavy metal components that are fatal to the human body, a device capable of collecting them needs to be developed. A mini cyclone, one of the devices that can effectively collect fine dust, has the advantage of relatively simple shape and high collection efficiency. Therefore, in this study, the collection efficiency of the mini-cyclone was numerically analyzed using CFD in order to find out whether such a mini-cyclone is suitable for collecting brake fine dust. As a result, the cut-off diameter was predicted to be about 1.5㎛, which means that the particle trapping load of the filter can be drastically reduced. Therefore, there is a possibility that the mini-cyclone can be used to collect fine dust from disc brakes.

• Journal of the Korea Furniture Society
• /
• v.26 no.1
• /
• pp.12-21
• /
• 2015

This is a study and work of furniture design adopted from a natural phenomenon, especially from the changing shapes of the moon. The drawer of furniture, a part frequently contacted with our hand (human body) is well related to the symbolism of the moon, which includes life conception and fertility. I created various forms of drawer handle shaped from the moon phases, which give a furniture design esthetical, symbolic and formative meanings. The characteristics of my drawer furniture designs are classified into 3 types. First, as the volumes of drawers increase, the handle shapes also change differently: old moon, crescent, half moon and full moon. Second, without keeping time order, drawers may have the same sizes with handles freely selected and arranged by formative accounts. Third, both increasingly changing type and freely selected and arranged type are combined to make a composite structure. In their simple geometric forms, these furnitures can provide nature intimacy, which fulfill the needs of our time.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.1
• /
• pp.47-57
• /
• 2013

In terms of expression, beauty illustration has become more diverse and innovative. Because of continued unique creative activities, more novelty has been pursued. In this study, beauty illustration in new artistic and decorative images was used to investigate the basic concepts of art activities, illustration and beauty illustration and make up for beauty illustration which adheres to traditional and classical expressions. In this study, the following results were obtained: First, in terms of expression of beauty illustration, the work with art expressions are still poor compared to other fields such as fashion illustration. Therefore, it is necessary to attempt beauty illustration of a new image which expresses artistic emotions. Second, by using an artistic technique called 'paper sculpture', a semi-solid shape has been completed, and a decorative beauty illustration was created. People get new inspiration through beautiful and innocent art pieces, which in turn motivate to create new expression. New art activities which take a human body as an art support beauty activities through picture and more sensitive inspiration. It was attempted to express other emotion and beauty by observing a single piece of work. A new possibility in beauty illustration which is differentiated from other art activities is proposed and its domain is developed.

• Korean Institute of Interior Design Journal
• /
• v.13 no.2
• /
• pp.56-63
• /
• 2004

Harmony between men and their surroundings has been one of the most profound motives in space and object design for a long time. It is often expressed in design as the concept of 'organic'. Nowdays the term of organic is expanding its meaning in the contemporary sense of organicism. Nature, human 'beings, and digital technology are the key issues in future design paradigms. Karim Rashid is one of the most futuristic and vendible designer and his works show these issues. His designs flow organically and he uses materials that allow his forms to flow like the body, echoing life forms. it's very sensual, very tactile. In his work, a new concept of organic design is expressed in the organic unity of experience. He tries to contribute objects to our physical landscape that inspires, engages, and encourage positive experiences. Also, Technology is at constant play in his design process. With the latest three dimensional design software it is much easier to design and model sophisticated and complex shape and forms. Digital technology affects not only his design processes but also cultural views. New technologies and social shifts are changing our understanding of interior space.