• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.10
• /
• pp.882-889
• /
• 2008

A humanoid is a robot with its overall appearance based on that of the human body. When the humanoid moves or walks, dynamic forces act on the body structure. Although the humanoid keeps the balance by using a precise control, the dynamic forces generate unexpected deformation or vibration and cause difficulties on the control. Generally, the structure of the humanoid is designed by the designer's experience and intuition. Then the structure can be excessively heavy or fragile. A humanoid design scenario for a systematic design is proposed to reduce the weight of the structure while sufficient strength is kept. Lower parts of the humanoid are selected to apply the proposed design scenario. Multi-body dynamics is employed to calculate the external dynamic forces on the parts and structural optimization is carried out to design the lower parts. Because structural optimization using dynamic forces directly is fairly difficult, linear dynamic response structural optimization using equivalent static loads is utilized. Topology and shape optimizations are adopted for two steps of initial and detailed designs, respectively. Various commercial software systems are used for analysis and optimization. Improved designs are obtained and the design results are discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2031-2036
• /
• 2012

There is body type that physique classified by apparent characteristics as shape of human body. Chest girth circumference and body type statistically has been look into correlative disposition, character etc. In this paper, we carried out study about prediction of chest girth as voice that interrelationship drew to analyze voice of disposition, character etc. in personal character. With this in mind, we measured intensity, spectrum about laughter by chest girth to classify composition group of subjects and then we would like to extract experiment result to predict chest girth by reciprocal comparison.

• The Research Journal of the Costume Culture
• /
• v.1 no.2
• /
• pp.131-144
• /
• 1993

Even though it has been to research on the variance of clothing pressure and on its effect of human body, it has not been available to evaluate the clothing pressure as an objective standard ta for the determination of an extra quantity of bodice' basic pattern. In this paper the basic pattern(the close adherence original shape) is determined by a drawing of plane figure after detaching an unweaving clothing from the inside of the gypsum, and the extra quantity is figured by a extension quantity when is formatted with 0.5, 1.0, 1.5 cm extra quantity longitudinal-cross section figures. With our experimental method, review the variance of clothing pressure according to difference of the extra quantity which was figured with subjects wearing experimental clothing including the extra quantity. The difference of the extra quantity was able to calculate with data form the subjects when anatomical position and five movements, then compare with subjects wearing non-extra quantity experimental clothing. The results of experiment as the follows : 1. There is only few body portions with the significant variance according to the increasing of he extra quantity at he body portion and the sleeve portion. 2. The clothing pressure of the sleeve portion was higher than the clothing pressure of the body portion. The difference of clothing pressure according to the variance of the extra quantity at the sleeve portion is more significant than the body portion. 3. Consider several important pressure points which wil be the No. 1 at the front of body portion. No. 17, 18 at the back of body portion and No. 21 at the sleeve portion. 4. It is important to have plane figure of gypsum when format an basis pattern.

• Korean Journal of Community Nutrition
• /
• v.15 no.5
• /
• pp.656-669
• /
• 2010

Rapid shift to western dietary patterns and social drive of thinness would lead to increase the likelihood of developing eating disorders. This study was performed to analyze the associated factors between dietary pattern and self visualization in terms of body shape, which may increase the risk of disturbed eating attitudes among high school students in Korea. A cross-sectional study was conducted from 2009 to 2010 for high school students including both male and female students, from 6 schools in Gyunggi Province, Korea. A total of 766 students self-reported a questionnaire, including weight control practice, perceptions of self body image and ideal body image, dietary habit, and EAT-26 (Eating Attitude Test-26). Logistic regression analysis was used to fine the factors potentially associated with disturbed eating attitudes. Statistical analysis was conducted using SAS program (version 9.1). Results showed that disturbed eating attitudes were found in 8.7% of male high school students, and in 20.8% of female high school students. Experience of body weight control was reported by 56.2% of male students and by 87.3% of female students. According to multiple logistic regression analysis, obesity was independently associated with high risk of disturbed eating attitudes in male students [Odds Ratios (OR) 2.96, 95% Confidence Interval (CI) 0.90-9.71]. Body image dissatisfaction (OR 2.77, 95%CI 1.37-5.62) and extended family type (OR 2.70, 95%CI 1.05-6.90) were independently associated with high risk of disturbed eating attitudes, especially in female students. In conclusion, proper efforts in education for obesity and developing self-esteem to reduce the risks of disturbed eating attitudes should be implemented in high school nutrition program.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.209-213
• /
• 2021

For the human body shape information, body measurement techniques using a tape measure or image analysis are used. However, there is a demand for a method with high measurement accuracy and reproducibility while being simple. In this paper, domestic and foreign patent research related to body size measurement technology was conducted to identify the development trend of the related technology. WISDOMAIN DB was used to search for patents published in Korea, the United States, Japan, and Europe, and valid patents were derived by defining the technical scope of major and medium classifications and sub-categories. For the derived patents, patent trends by year, major applicants by country, and the status of technological fields were analyzed. In the field of body size measurement technology, the proportion of patent applications filed in Korea is high, indicating that Korea is leading the patent application in this field. Although the number of patent applications in the field of sensor-type measurement technology was not large, it has an advantage in measurement simplicity, so the development of related technology is expected to contribute to the improvement of measurement accuracy related to body composition analysis.

• Fashion & Textile Research Journal
• /
• v.8 no.2
• /
• pp.196-202
• /
• 2006

In this study the swimwear pattern focused on a typical middle-aged women's body was developed and discussed. To determine the characteristics of a typical middle-aged women's body, their actual bust were cast. According to a generated flattened body surface shell, the right side of pattern was designed considering stretching ratio of swimwear materials as shown in the figure 3. Special features of the developed swimwear pattern are a bust dart, a particularly designed lining, a power-net, and a brassiere-cup. Against a commercial swimwear pattern, the darts were applied to bust area considering its volume. The lining was attached on the entire right side except brassiere part, and power-net was added twice on belly and hip part. As a result, silhouette and body shape were improved. The new brassiere-cup was designed and made to satisfy the middle-aged women's demand about their bust volume. Swimwear fitting test was performed, and it was evaluated. The developed swimwear rated activity, body support, entire silhouette, pressure, comfortable fitting, suitability with body figure, nudity higher by comparison with a commercial swimwear, as shown in the Table 6. Specially the developed swimwear satisfied future customers about a bust, a hip, a waist, a belly area, which the middle-aged women are not confident. Reducing exposure of an armhole and upper leg area, it also satisfied them. New developed swimwear pattern will provide useful reference to swimwear businesses targeting middle-aged women.

• Journal of the Korean Society of Costume
• /
• v.54 no.6
• /
• pp.101-117
• /
• 2004

Opposed to following the contours of the human body, the voluminous enlargement in costume, which characterizes the distinguished enlargement in space rather than the contour of human body, mean the enlargement aspect involving the vertical protrusion and the expansion of shape and volume as well as the extension of length. The costume enlargement as a different method of expression is a symbol showing a meaning of something and an aesthetic expression containing man's will. This voluminous enlargement of costume, as an aesthetic expression, has different formative characteristicsand immanent meanings according to ideals and thoughts as well as social and cultural background of each age Accordingly, the aesthetic consciousness also differaccording to the change of the times. To study the aesthetic consciousness of costume's voluminous enlargement, focous had been given to milieus that show comparatively conspicuous voluminous enlargement Periods that have been subjected to this study include costumes of the ancient Egypt, the Gothic period in the Middle age, the Renaissance, the Baroque Rococo of the recent times, and the modern era (Empire, Romantic, Art Nouveau. etc) With focus given to the principle of design obtained through this study were used to analyze the aesthetic characteristics, Futhermore, based on the spirit of the times and the socio-cultural symbolism, research on immanent meanings, as supported by objectivity and universal validity, was also made, the enlargement beauty of costume had been placed under the aesthetic category and, by interpreting the analogies of presented in aesthetic consciousness, the true nature of the voluminous enlargement in costume had been traced. To Conclude, the aesthetic consciousness of the voluminous enlargement of the costumes in history was found to have following characteristics: (l) Metaphorical (2) Unlooked-for irregularity (3) feeling of satisfaction driven by self-enlargement (4) Dignified sublimity (5) Symbol of wealth and class (6) Ceremonial dignity (7) Tradition of the nobility (8) Aesthetic ornament (9) Ideal contour of the body

• International Journal of Advanced Culture Technology
• /
• v.11 no.4
• /
• pp.302-309
• /
• 2023

Wearable devices, attached to the human body, track and enhance users' activities, health, and communication. Therefore, considering ergonomic factors in product design is crucial. However, previous research has somewhat overlooked the importance of integrating ergonomic design elements into a broad spectrum of design factors. This study aims to examine the impact of physical attributes inherent in smart wristbands and smartwatches on the perceived functional value, specifically, perceived usefulness, ease of use, and fit. A survey was conducted among 289 US adults who had experience using smart wristbands or smartwatches. The collected data were analyzed using descriptive statistics, factor analysis, Cronbach's alpha, t-test, MANOVA, and regression analysis in SPSS version 29. The results showed that the shape of the front display significantly influenced perceived ease of use, and the product's weight had a substantial impact on both perceived ease of use and fit. Furthermore, distinct technical features on the front display had varied effects on perceived usefulness, ease of use, and fit. Notably, the presence of activity tracking, alarm, and calendar functionalities led to distinct differences in ease of use and fit. Features such as distance tracking, phone call, social media notifications, text messaging, and time display functions showed significant influences on the perception of fit. These findings provide insights into the physical values of smart wristbands and smartwatches as perceived by users.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.544-547
• /
• 2008

As the mobile electronic product is getting slimmer and smaller, the necessity of keypad is being increased. But the possibility of mis-typing keypad is increased rapidly due to the integrated keypad in the small mobile product. The business division has not considered the methodology of keypad design essentially. In this paper, analysis method and design evaluation standard to reduce the mis-typing of UMPC(Ultra Mobile Personal Computer) is suggested. First, the finite element analysis model and the biomechanical human body model are implemented in order to simulate the exact contact characteristic between finger and keypad. The reliability of analysis model is guaranteed by the comparison of the contact pressure between analysis result and experiment result of the pressure sensor. The design optimization of key shape and layout is derived through the response surface method. The prototype model is produced with the optimized design of keypad, and then it verified the advanced function with user mis-typing detection test. The optimized keypad design reduced the mis-typing ratio from 35% of existing model to 75 of proposed model. If this paper is widely applied to not only UMPC but also the other electronic products, the emotional quality of all products could be improved considerably.

• Applied Microscopy
• /
• v.31 no.3
• /
• pp.235-244
• /
• 2001

The aim of this study was to observe morphological changes of Trichomonas vaginalis after contact with human vaginal epithelial cells, by scanning electron microscope. The vaginal epithelial cells (VEC) (menstrual, days $5\sim10$) from normal women were mixed with T. vaginalis (VEC/trichomonads ratio of 1 : 10), and incubated for 30 min. The parasitic body was changed to a more elongated shape with pseudopodia or was flattened to ameboid transformation showing highly adherence to VEC.