• 복식
• /
• 제66권8호
• /
• pp.46-60
• /
• 2016

Countries have different brassiere patterns, and this study produced and compared 3/4 brassiere patterns from different countries to determine the difference in patterns, and to investigate the stress distribution and shape of cross section while wearing brassieres using 3D virtual fitting system. Despite the growing interest in underwear, there is a lack of related books and research on brassiere patterns, which causes the difference in sizes and pattern drafting methods by countries. Thus, research on this is needed. 3D virtual fitting system has been introduced to compare patterns, thereby improving visible effects and reducing the loss in cost caused by underwear pattern fitting test. According to the result of pattern analysis, The Secoli type exhibited the least breast cover rate (14.9 cm), while the largest cover rate was shown in Christina and ESMOD types (17.7 cm). It is believed that the difference in pattern drafting causes the difference in the total length of a brassiere. Furthermore, the Secoli, Moda Burgo, and ESMOD brassieres drafted from basic bodice pattern were found to be longer than the Christina and Han Sunmi brassieres attained from direct pattern drafting. Moreover, the darts' volume of upper and lower cups in Christina and Han Sunmi types was similar in shape. The shapes of cradle drafted from basic bodice pattern were a straight line, while those from direct drafting formed a curved shape. In fitting multiple cross sections, the Secoli, Moda Burgo, and ESMOD brassieres had gaps between the brassieres and the body. Among these, the largest number of gaps was observed in the ESMOD type pattern. This study aimed at performing comparative analysis of various brassieres' pattern drafting types as a basic research for developing a brassiere pattern drafting type.

• 한국의류학회지
• /
• 제19권3호
• /
• pp.516-524
• /
• 1995

The purpose of this study was to analyze the variation of body shape and to. divide growth period into some age groups based on body type. Duncan Test, Heath-Carter's somatotyping method and allottery equation (y=baa) were applied to semiautomatic data concerning obesity/leakiness. The materials were 309 females aged from 12 to 17 years old. The following results were obtained: 1. In the Developmental trend of the human body, the 12-13 age groups belonged to the acceleration stage of adolescent growth spurt. The 14-15 age groups belonged to the latter period of adolescent growth. The 16-17 age groups belonged to the termination stage of adolescent growth. 2. In the Heath-Carter's somatotyping method, the average somatotype changed into M.M- C-C-M-D with age. 3. In the alphamerical analysis, the first critical point appeared at the stature 146 Cm in case of weight, LBM and fat. The second critical point appeared at the stature 154-157 Cm in case of LBM and Fat. All the three measurement showed positive allotmentty.

• 복식문화연구
• /
• 제26권2호
• /
• pp.188-202
• /
• 2018

This study aimed to categorize women's body shapes by type after extracting prototypes of 25~34 year old Korean woman. The standardizing research service project conducted by the Ministry of Commerce, Industry and Energy in 2005, divided the age ranges of adult women into three groups: 18~24 years (young), 25~34 years (young-adult) and 35~49 years (adult). This study utilized this age division method to create a concrete body type categorization schema with the most marriageable period, 25 to 34 years old as target age the target age group. We used, measurement data from the 7th Korean Human Body Size Survey (Size Korea) for the body shape analysis. We completed a statistical analysis using the statistical program SPSS 21. After creating the body types using CLO 3D, which is based on the 7th Korean human body measurements, we input data for the average size for each type into the Avata. We then compared and analyzed the cross sections using the Rapidform XOR program. The results of the type-specific characteristics are as follows: big square body of obese body, small square body of plain flat body with tall, plain square body of plain flat with short, triangular body of lower body obesity there was. Significantly, the results of this study should facilitate the development of various apparel products using mass customization or easy-order systems.

• 패션비즈니스
• /
• 제26권6호
• /
• pp.32-46
• /
• 2022

The purpose of this study is to explore a three-dimensional (3D) simulation of skirt shape concepts by manipulating circumferences and lengths via parametric design in the fashion design concept stage. This study also intends to propose a modeling method that can judge and transform the shape through immediate parameter adjustment. We looked at cases that utilized parametric design in other fields of fashion design, reviewed and analyzed the variables used in each study, and constructed parameters suitable to implement skirt fashion design. The traditional design elements required for skirt design, namely waist and hip circumferences, were set as variables in this study. The parametric design was developed to generate ideas of two skirt silhouettes (tight and flared) and three lengths (mini, knee-length, and maxi). To apply the skirt design implemented through variables to the actual 3D human shape, the shape data of women in their 20s and 30s were randomly selected from the 5th human data of Size Korea. Skirt design silhouette modeling was performed by adjusting the variable values according to body type. Parametric design has the potential to help develop design ideas in the field of fashion design, considering the method and characteristics of parameters of the variety of variables and rapid modification. Furthermore, if systematic research on variables and options among fashion design elements is conducted, the possibility of converging them into customization or co-design fashion design processes could be confirmed.

• 복식문화연구
• /
• 제4권1호
• /
• pp.93-109
• /
• 1996

Madeleine Vionnet, a representative designer of the 1920′s, who made prefectly organized clothes with unique formativeness was the first to express fabric in a modern method and was called "The architect of fashion". This is because she developed a three dimensional design by expressing cloth-she rejected corset, should pad, etc-into elegant curved lines that do not stick to the body. By granting meaning to the beauty of the body and its movement in her own unique ways, she emphasized the formativeness in her work and gave shape to creative artistry. Expecially with the "Bias-Cut" she could express the lines of the body more flexibly and could make geometrical styles like the diamond shape dress or the triangle dress more effectively. Using the "Tired Bias cut" and "Handkerchief point" she let the skirt hemline dangle irregularly in geometrical forms, thus showing modern formative sense which forms a three dimensional solidness along the movement of the human body. Thus far, analyzed how the contemporary trend of art was reflected in her designs by studying her work; also investigated through her artistic characteristics and pattern method. Also be tried to find out what can be learned through her artistic view and superb formativeness as a designer.

• 복식
• /
• 제57권4호
• /
• pp.9-17
• /
• 2007

Somatotype is human body shape and physique type which can be classified not only by the size, but also by the shape or posture of the body. Postural variations in the alignment of the back, shoulder, and neck can have an adverse effect on the fit of garments designed to hang from the shoulders. There have been some previous studies about the lateral upper torso by analyzing photographic measurements. In this study, 3D body scan images were used to classify the side somatotype of upper lateral method even though they are major data in the classification of upper torso. This study focused on following objective.; 1) To apply new and developing technology into the apparel industry analyzing 3D body scan images. 2) To classify upper laterla torso using the data through the new improver technology, 3D body scanner. 3) To propose basic materials for well fitted garments for each type of figure. The test subjects for this study were two hundreds nine female aged 19 years and up who were recruited in Cornell university body scan research team. Seventeen Variables(12 angles, 5 lengths) out of 3D body scan data were measured based on these landmarks and applied to analyze. The result of factor analysis indicated that 6 factors were extracted through factor analysis and orthogonal rotation by the method of Varimax and those factors comprise 62.5% of total variance. And the somatotype of upper body is classified into 3 types of figures according to cluster analysis; Bent forward posture, Straight posture, Swayback posture. Future study could be addressed about the somatotype of body by the age group based on the large database with wide variety of age.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권11호
• /
• pp.3121-3144
• /
• 2023

As interest in the metaverse has grown, there has been a demand for avatars that can represent individual users. Consequently, research has been conducted to reduce the time and cost required for the current 3D human modeling process. However, the recent automatic generation of 3D humans has been focused on creating avatars with a realistic human form. Furthermore, the existing methods have limitations in generating avatars with imbalanced or unrealistic body shapes, and their utilization is limited due to the absence of datasets. Therefore, this paper proposes a new framework for automatically transforming and creating stylized 3D avatars. Our research presents a definitional approach and methodology for creating non-realistic character avatars, in contrast to previous studies that focused on creating realistic humans. We define a new shape representation parameter and use a deep learning-based method to extract character body information and perform automatic template mesh transformation, thereby obtaining non-realistic or unbalanced human meshes. We present the resulting outputs visually, conducting user evaluations to demonstrate the effectiveness of our proposed method. Our approach provides an automatic mesh transformation method tailored to the growing demand for avatars of various body types and extends the existing method to the 3D cartoon stylized avatar domain.

• 한국의류산업학회지
• /
• 제12권4호
• /
• pp.487-493
• /
• 2010

The objectives of this study were to investigate the progress of obesity in women from childhood to adulthood and to analyze the characteristics of obese figures through comparing their body proportions to normal-weight people, to provide a basic reference for development of new size categories and improved pattern grading. Body measurement was made on 6,704 women age between 7-39 in Sizekorea 2004 database. The age range was divided into three groups: children(7-12), teenagers(13-18) and adults(19-39). The result of research into the characteristics of body proportions of obese figures and the classification of different figure groups of obese people are as follows: The ratio between width and circumference for each part of the body was investigated according to body weight which was grouped into three different weights of low, normal and obese body weights. And the result demonstrated that in all the ranges of age, the obese groups had the lowest ratio between width and circumference, having a thick body shape. And according to the result of comparing the ratio of the circumference of each body part divided by the waist circumference, the obese group also showed a low ratio, indicating that they have bigger waist circumference than any other body parts. By analyzing the ratio of circumference of body parts divided by waist circumference, three factors were identified as contributing to obesity. Using the factor loadings of the upper, distal and lower body obesity, a cluster analysis was carried out and three different categories of obesity were defined; abdominal obesity, distal obesity and proximal obesity.

• 인터넷정보학회논문지
• /
• 제21권2호
• /
• pp.19-26
• /
• 2020

This paper analyses the feasibility of using implantable antennas to detect and monitor tumors. We analyze this setting according to the wireless propagation loss and signal fading produced by human bodies and their environment in an indoor scenario. The study is based on the ITU-R propagation recommendations and prediction models for the planning of indoor radio communication systems and radio local area networks in the frequency range of 300 MHz to 100 GHz. We conduct primary estimations on 915 MHz and 2.4 GHz operating frequencies. The path loss presented in most short-range wireless implant devices does not take into account the human body as a channel itself, which causes additional losses to wireless designs. In this paper, we examine the propagation through the human body, including losses taken from bones, muscles, fat, and clothes, which results in a more accurate characterization and estimation of the channel. The results obtained from our simulation indicates a variation of the return loss of the spiral antenna when a tumor is located near the implant. This knowledge can be applied in medical detection, and monitoring of early tumors, by analyzing the electromagnetic field behavior of the implant. The tumor was modeled under CST Microwave Studio, using Wisconsin Diagnosis Breast Cancer Dataset. Features like the radius, texture, perimeter, area, and smoothness of the tumor are included along with their label data to determine whether the external shape has malignant or benign physiognomies. An explanation of the feasibility of the system deployment and technical recommendations to avoid interference is also described.

• 한국생활과학회지
• /
• 제9권4호
• /
• pp.471-482
• /
• 2000

The purpose of this study is to produce slacks pattern for pregnant women in the mid or second half period of their pregnancy according to the development figure of the body shell from a follow-up measurement. We here would like to produce slacks pattern for pregnant women constructed to fit better with their individual property in their figure and to help maintain the shape and beauty of the lower half of body and would compare it with two manufactured slacks pattern. The results of the study were as follows; 1. As the pregnancy proceeds, the height of natural-waist line went up spontaneously due to the projection of abdominal region, therefore, it was given darts at the front zipper part so that they could maintain a nice figure and to avoid possibility of feeling oppressed. To acquire a slimmer outfit, we made of the slacks-bottom narrower than the width at the knee line, and it worked out. 2. Sensory evaluation for appearance: According to the statistical of the result of 19items on the questionaire, all items showed significant difference(a$\leq$0.01) between the new and A(bunka) B(Kim's pattern) method slacks pattern, with the new pattern having higher scores. The new drafting method proved to be better fitted, to fit the shape of bodies properly and to get a visual effect to look slim.