• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.670-674
• /
• 2002

In the recent years, as the research and the development of micro and precision machinery become active, the interest of micro actuators using SMA(Shape Memory Alloy) has been increased. The dynamic characteristic analysis of SMA is necessary for actuator application and many common researches report the material characteristics of SMA sufficiently. However, the research on dynamic characteristics is very deficient. In this paper, the helical spring are fabricated with NiTi SMA wire of high resistivity. The force, response speed, temperature, and displacement are measured by digital force gauge, infrared thermometer, and laser displacement sensor so that the dynamic characteristics of this SMA is analyzed. Also, bidirectional actuator was fabricated and experimented for its performance.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.155-159
• /
• 2004

In the recent years, as the research and the development of micro and precision machinery become active, the interest of micro actuators using SMA(Shape Memory Alloy) has been increased. The dydnamic characteristic analysis of SMA is necessary for actuator application and many common researches report the material characteristics of SMA sufficiently. However the research for dynamic characteristics is very deficient. In this paper, the helical suing are fabricated with NiTi SMA wire of high resistivity. The force, response speed, temperature, and displacement are measured by digital force gauge, infrared thermometer, and laser displacement sensor so that the dynamic characteristics of this SMA is analyzed. Also, bidicrectional actuator was fabricated and experimented for its performance.

• 오토저널
• /
• 제10권2호
• /
• pp.46-53
• /
• 1988

Effect of Notch Shape and Hardness Ratio on Characteristics of Impact Fracture in Dual Phase Steels. In this study, it is investigated the effect of notch shape and hardness ratio on the characteristics of impact fracture in dual phase steels. The impact test was carried out at the temperature range from -40.deg. C to room temperature with Instrumented Charpy Impact Tester. The main results obtained are as follows; 1, The maximum impact bending strength (.sigma.$_{max}$) increases with the tensile strength. Also, the impact energy depends on .sigma.$_{max}$. 2, In room temperature, the impact energy depends on crack-initiation energy (E$_{i}$) in case of the high hardness ratio (R=3.4), whereas depends on crack-propagation energy (E$_{p}$) in case of the low hardness ratio (R=1.8) and the dependence of crack-initiation energy of the impact characteristics decreases with increasing test temperature. These phenomena are result from the difficulty of cleavage facet formation.ion.ion.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.47-52
• /
• 2003

In the recent years, as the research and the development of micro and precision machinery become active, the interest of micro actuators using SMA(Shape Memory Alloy) has been increased. The dynamic characteristic analysis of SMA is necessary for actuator application and many common researches report the material characteristics of SMA sufficiently. However, the research on dynamic characteristics is very deficient. In this paper, the helical spring are fabricated with NiTi SMA wire of high resistivity. The force, response speed, temperature, and displacement are measured by digital force gauge, infrared thermometer, and laser displacement sensor so that the dynamic characteristics of this SMA is analyzed. Also, bidirectional actuator was fabricated and experimented fir its performance.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.346-351
• /
• 2003

In the recent years, as the research and the development of micro and precision machinery become active, the interest of micro actuators using SMA(Shape Memory Alloy) has been increased. The dynamic characteristic analysis of SMA is necessary for actuator application and many common researches report the material characteristics of SMA sufficiently. However, the research on dynamic characteristics is very deficient. In this paper, the helical spring are fabricated with NiTi SMA wire of high resistivity. The force, response speed, temperature, and displacement are measured by digital force gauge, infrared thermometer, and laser displacement sensor so that the dynamic characteristics of this SMT is analyzed. Also, bidirectional actuator was fabricated and experimented for its performance

• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.156-167
• /
• 1996

The present work is a continuation of our previous study to investigate the effects of parameters such as equivalence ratio, hydrogen supplement rate and initial pressure on combustion characteristics in a disk-shaped constant volume combustion chamber. The main results obtained from the study can be summarized as follows. The flames in near stoichiometric mixture of methane-air are propagated with a spherical shape, but in excess rich or lean mixtures are propagated with a elliptical shape. And, they are changed to an unstable elliptical shape flame with very regular cells by increasing the hydrogen supplement rate. Also, flame is sluggishly propagated at increased initial pressure in combustion chamber. Volume fraction of burned gas and flame radius as the combustion characteristics are increased by increasing the hydrogen supplement rate, especially at the combustion middle period, but then are slowly increased by increasing the initial pressure.

• International Journal of Railway
• /
• 제4권4호
• /
• pp.103-108
• /
• 2011

The effect of the core cell shape on shock absorption characteristics of biomimetically inspired honeycomb structures has been numerically investigated. The finite element models of honeycomb test specimen composed of five core cells of identical mass have been constructed, and numerical simulations have been run on PAMCRASH. The dimensions of the sides of core cells as well as the angle between the sides have been shown to influence the shock absorption characteristics of the honeycomb structure. The specimen with regular hexagonal core cell shape is found to show the best shock absorbing capacity, and specimen with rectangle-like core cell are found to provide good shock absorbing characteristics.

• 한국주거학회논문집
• /
• 제25권5호
• /
• pp.83-91
• /
• 2014

The main purpose of this research is to understand how the problems, which existing letter-shape houses have, are solved in Unjoru which is one of the letter-shape houses. Furthermore, there is the secondary purpose which is to realize the architectural characteristics of Unjoru through the process from the composition of rooms and buildings to the method of structure and roof formation. This research was approached in terms of architectural design, and as the result, the problems of the existing letter-shape houses was resolved by literally converting the shape of outdoor space to 品-shape form. Moreover through the result, it was recognized that the 占-Shape plan was flexible in responding to the demand of the times, such as the order of precedency within men and women and each generation. In addition to the previous results, it was confirmed that the location of major rooms was also decided by considering the interrelationship with natural environment of surrounding area. Also, in the whole proportion of building's plan, each building, such as ㄷ-shape Anchae and big-sized and middle-sized Sarangchae having 丁-shape form, and major rooms in the each building have proportion system such as 1:1, 3:4, $1:\sqrt{2}$, and 3:5 as aesthetic numerical value. Finally, it was understood that the architectural intention had double-sided characters, one side was authority and dignity in the aspect of shape and another side was practicality in aspect of inner housing life.

• 열처리공학회지
• /
• 제18권2호
• /
• pp.105-111
• /
• 2005

In sheet metal forming, drawbeads are often used to control uneven material flow, which may cause defects such as wrinkles, fractures, surface distortion and springback. Appropriate setting and adjusting of the drawbead force is one of the most important parameters in sheet forming process control. Therefore in this study, drawbead test was performed at various bead surface treatment conditions to clarify the frictional characteristics between sheet and drawbead. Furthermore, the differences in drawing force between circular and rectangular shape beads have also been measured to estimate the effectiveness of bead shape on the material flow control. The results show that drawing and friction characteristic were strongly influenced by surface treatments of bead and bead shapes.

• 대한전자공학회논문지TE
• /
• 제37권2호
• /
• pp.33-40
• /
• 2000

본 연구에서는 패턴인식과 영상압축을 목적으로 2-D 영상내에 포함되어 있는 물체들의 복잡한 형상을 형태론적 연산을 이용하여 단순한 원시형상 요소들로 분해하는 방법에 관해 연구하였다. 기존의 형태론적 형상분해 알고리즘에서 가장 큰 문제점은 형상을 표현하고 기술하는데 필요한 원시형상 요소의 수가 너무 많이 생성된다는 것이다. 본 논문에서는 이러한 문제점을 개선하기 위하여 형상의 기하학적인 특징과 가장 유사한 원시형상 요소와 4개의 스캔모드를 사용하는 형상 분해법을 새롭게 제안하였다. 제안된 알고리즘은 4개의 스 캔모드를 사용해서 원판, 정사각형, 마름모 꼴 등으로 구성되는 원시형상 요소를 추출하는 방법이다. 이와 같은 알고리즘은 기술 오차를 줄이면서 원시형상 요소의 수를 줄여 기술효율을 높일 수 있는 방법으로 최소의 중복성을 보장할 수 있으며, 알고리즘이 단순하고 계산 시간이 감소한다는 특징이 있다.