• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.82-85
• /
• 2006

A trapezoidal fin with various lateral surface slopes is designed optimally by using one-dimensional analytic method. For four different convection characteristic numbers, the trend of heat loss as a function of fin tip length is shown. The optimum heat loss is somewhat arbitrarily chosen as 92% of the maximum heat loss. The optimum fin length corresponding to this optimum heat loss versus convection characteristic number is presented. The optimum effectiveness and specific effectiveness is presented as a function fin shape factor.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.341-346
• /
• 2006

This paper provides the resuIts on the evaluation of dynamic characteristics of the optimized shells. Five fundamental technologies such as computer-aided geometric design, automatic mesh generation, shell finite element, design sensitivity analysis and shell optimization process, are used for shell optimization maximizing the fundamental natural frequency. A dome shell is adopted for the shell shape optimization and the dynamic characteristic of the optimized shell such as the variation of natural frequencies is then investigated. From the investigation, more constraint functions related to shell natural frequencies is necessarily required to effectively control dynamic characteristics of the optimized shells.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.3
• /
• pp.174-178
• /
• 2015

This paper describes a signal processing technique for identifying signals from defects by using an electromagnetic-ultrasonic guided waves method based on a magnetostrictive sensor that generates a torsional mode (T(0, 1)). Because this technique is based on the digital filtering, the filtered signals provide information on the relationship between the cutoff frequency of band-pass filter and the characteristic of defect signals in heat exchange tubes. To verify the performance of the technique, artificial defects with various thickness reduction ration and shape were machined in titanium tubes, and digital filtering results are reported. The results show that digital filtering provides information to the identify shape of defects and the contact condition between the tube and support ring. Therefore, the proposed technique has good potential as a tool for evaluating the integrity of heat exchange tubes.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.41-43
• /
• 2008

This paper deals with a study on characteristic of inductance on spoke type motor. The rotor and stator is redesigned as rounding teeth of stator and pole surface of rotor. Result, a shape of air-gap is changed and the cogging torque is reduced greatly. In consequence, the inductance of spoke type motor is changed. The Finite Element Analysis(FEM) is used to characteristics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.134-139
• /
• 2002

We have made known the study of shape development of interference device for vehicle noise control. It's primary object greatly attenuate the noise due to transport vehicle by small products installed on the noise barrier edge. Also, it is able to improve the insertion loss of a noise barrier without increasing the height. The present time, we set up a newly manufactured products on the noise barrier edge and testify to it's the performance make use of an experiment and evaluation for the reduction of highway traffic noise. In this paper the frequency characteristic of interference device of noise barriers with attached newly developed products in terms of shape, absorptive material and split panel, are examined using field test at highway.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.268-273
• /
• 2002

A modeling method for the dynamic characteristic analysis of a translationally accelerated trapezoidal cantilever plate is presented in this paper. The equations of motion for the plate are derived and transformed into a dimensionless form. The effects of the inclination angles and the acceleration on the vibration characteristics of the plate are investigated. Incidentally, natural frequency loci veering and associated mode shape variations are observed and discussed

• New & Renewable Energy
• /
• v.4 no.3
• /
• pp.36-44
• /
• 2008

This paper discusses about the mathematical modelling of a new conceptual shape of horizontal axis wind turbine. The geometrical characteristic of wind turbine is studied for the variation of azimuthal angles and elevation angles. The projecting trajectories of Cuban-8 blade due to rotation are analyzed on the each plane in the Cartesian coordinate system. Trajectories show several interesting graphical patterns since the geometrical shape is complicated with the rotational motion of two twisted circumferential blades with elevation angles.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.3
• /
• pp.358-367
• /
• 1998

Since the performance of cooling tower is strongly dependent on the thermal performance of the packing, the evaluations of heat transfer rate and fan power from various packing have attracted intense interest. In the present study, two new packings have been devised and their performances have been compared with those of two existing packings to find better shape characteristic. It is found that one of the existing packings, which showed high heat transfer rate and medium fan power due to zig -zag flow passages and highly irregular surfaces, should be adapted.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.361-366
• /
• 2003

For regenerative pump performance test we made 5 times enlarged and 3 different kinds blade types impeller with similarity. Due to geometrical characteristic of regenerative pump, there are two kinds of groups which effect on performance of it. One is geometric shape of impeller blade and the other is clearance and inlet/outlet head loss. To study performance of regenerative pump with impeller shape changes, we tested it with reducing clearance. And we reconcile performance data in the case of zero clearance and zero inlet/outlet head loss. Finally we could verify the influence of each group.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.2
• /
• pp.69-75
• /
• 2004

In this paper, we propose the shape of extremely small thrust VCM for application of the Nanoindenter, which enables control of very small force and displacement. We performed optimization of the VCM shape using conjugated gradient method. And the purposes of optimization are the minimization of the permanent magnet size for the efficient systems, minimization of deviation of flux density from the air gap for operate on regular thrust and a linearization of thrust for a good control characteristic. The finite element method is used for characteristic analysis. The node moving method is used to redundant changes of design variables. As a result, the VCM produces a yew small force by the difference of flux density of lower part from higher one. Also, in a wide range of current (0［A］-1［A］), the VCM produces linear driving thrust by saturating the magnetic circuit path and operate on regular thrust by minimizing deviation of flux density of the air gap.