• Journal of Microbiology and Biotechnology
• /
• v.20 no.7
• /
• pp.1061-1068
• /
• 2010

The biological synthesis of nanoparticles has gained considerable attention in view of their excellent biocompatibility and low toxicity. We isolated and purified rhamnolipids from Pseudomonas aeruginosa strain BS-161R, and these purified rhamnolipids were used to synthesize silver nanoparticles. The purified rhamnolipids were further characterized and the structure was elucidated based on one- and two-dimensional $^1H$ and $^{13}C$ NMR, FT-IR, and HR-MS spectral data. Purified rhamnolipids in a pseudoternary system of n-heptane and water system along with n-butanol as a cosurfactant were added to the aqueous solutions of silver nitrate and sodium borohydride to form reverse micelles. When these micelles were mixed, they resulted in the rapid formation of silver nanoparticles. The synthesized nanoparticles were characterized by UV-Visible spectroscopy, transmission electron microscopy, and energy dispersive X-ray spectroscopy (EDS). The nanoparticles formed had a sharp adsorption peak at 410 nm, which is characteristic of surface plasmon resonance of the silver nanoparticles. The nanoparticles were monodispersed, with an average particle size of 15.1 nm (${\sigma}={\pm}5.82$ nm), and spherical in shape. The EDS analysis revealed the presence of elemental silver signal in the synthesized nanoparticles. The formed silver nanoparticles exhibited good antibiotic activity against both Grampositive and Gram-negative pathogens and Candida albicans, suggesting their broad-spectrum antimicrobial activity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3625-3630
• /
• 2013

The modularization accomplished a big contribution in cost down and assembly-time shortening and the quality increase. But few improvements were made to this design largely due to the inflexibility of steel. In recent years, door modules made of PP-LFT material is manufactured using injection molding method. As a result, the plastic door modules allow more flexibility of door shape and become lighter. Warpage is generally large in the molded plastic door carrier plate due to the limitation of gate location and the fiber orientation. So after a few test injection the mold compensation processing for the improvement of an assembly characteristic. This research was performed to determine the factors that contribute to warpage for a injection-molded door carrier plate and presented differences in three mesh types of meshing method and its results. as a result we can improve process of tooling modification can reduce process of trial and error.

• Korean Journal of Human Ecology
• /
• v.23 no.3
• /
• pp.515-527
• /
• 2014

This study is intended to develop the creative and high value-added products as well as the development of diversity for jump suit for the future by analyzing the trend and feature shown in jump suit in the modern fashion. In the research methodology, the analysis was carried out over a total of 351 work pieces on jump suit among those presented in the collection of Paris, Milan, New York and London from 2006S/S to 2013F/W as well as literature review. The aesthetic features on suit jump design introduced in the modern fashion could be characterized as the following. First, both upper and lower garments are composed with a simple array of items and the stress was put on modernity feature through minimal expression technique. The feature of solid simplicity was also given with achromatic color or neutral monochrome. Second, the feminity image was emphasized with adoption of such highlighting items as detailed add-ons, tops, camisoles and blouses that stress the organically curved streamline including silhouette, material itself, crease and drape that enable the direct and indirect exposition of human body and the expression of smooth curve in human body. Third, jump suit revealed the multipurpose feature as item available for the diverse wear such as working habiliment, sports wear, uniform, office wear and evening wear, depending on the terms and conditions. Fourth, the deconstructive characteristic appeared through integration with various items, destruction of formative structure, non-structural shape, and ambiguity in wearing method.

• Korean Journal of Plant Taxonomy
• /
• v.42 no.1
• /
• pp.1-12
• /
• 2012

To clarify the morphological variations of Galium, its morphological characteristics were examined using maximum parsimony analysis. The key characteristics as well as the range of variation in each characteristic were investigated at the species level and were employed to elucidate the relationships between the taxa. This study confirmed that species belonging to genus Galium formed a monophyletic group and comprised two main clades. Sect. Cymogaliae and sect. Leptogalium are polyphyly groups, and other sections are monophyletic group. This study also suggests that the fruit hairs, the types of petal apexes, and the colors of the petals are the most valuable taxonomic characteristics for differentiating different sections. The numbers of the leaves and leaf shape provide useful taxonomic characteristics for the identification of different species.

• Elastomers and Composites
• /
• v.34 no.3
• /
• pp.253-261
• /
• 1999

The cure properties of rubber compounds containing different adhesive compositions were examined. As the amounts of tannin were increased in the adhesive composition, the scorch time was increased and cure rate was decreased due to the size and shape of tannin molecules. Also, the effect of adhesive composition on the adhesion between rubber and fiber was examined by TCAT(Tire Cord Adhesion Test), The reinforcing cords used in this study were mon ofilaments of nylon 610 and nylon 66. According to the results, the optimum adhesion strength between rubber and fiber could be obtained with adhesives whose molar ratios of formaldehyde/resorcinol were above 5/1 in the recipes. Although the level of dip pick-up(DPU) on the reinforcing cord affects the adhesion strength, the DPU of nylon 610 monofilament did not affect the adhesion strength because the level of DPU was constant regardless of the adhesive compositions. In this case, the adhesion strength with the adhesive composition could be explained with the behavior of tannin in the adhesive.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.269-274
• /
• 2018

In the middle of May 2018, typical red thread disease symptoms were observed on Kentucky bluegrass (Poa pratensis L.) on a golf course, which locates at Yangsan, Gyeongnam province in Korea. Irregular-shaped patched symptoms were observed in fairway of golf course. The foliar symptom was dried out and faded to straw color and tip of the grass leaves were tangled like thread. Early morning, infected and tangled leaves were covered with the pinkish gelatinous antler-like structure (sclerotinia) as a typical red thread disease symptom. Causal fungal pathogens were isolated from the symptom in Kentucky bluegrass. The fungal culture characteristic on potato dextrose agar color of colony was pale pink and conjugated hyphae, sclerotium of irregular shape was pale pink and 3~5mm diameter in size. The pathogen was identified as Laetisaria fuciformis based on morphological and culture characteristics as well as molecular characteristics. Pathogenicity test was verified on the Kentucky bluegrass by Koch's postulates. This is the first report of red thread disease occurrence in Kentucky bluegrass by L. fuciformis in Korea.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.963-966
• /
• 2008

본 연구에서는 최근까지 유사관측을 수행하고 있는 금강본류 하도구간의 금남$\sim$공주 지점을 대상으로 하였다. 분석을 위하여 이 지점의 총유사량 산정에 영향을 미치는 부유사량 관측 및 수위, 유량과 같은 하천 흐름 등에 관한 과거의 자료를 수집 정리 하였다. 본 연구에서 적용하고자 하는 교량의 교각에 대한 기하학적 형상은 원형, 정사각형, 정팔각형, 장방형으로 하였으며 분석 모형은 SED2D-WES 모형을 이용하여 유역에 대한 교각의 형상이 미치는 영향에 대하여 연구 하였다. 그 결과 지름이 6m, 경간장 57m인 원형교각의 경우 교각에서 약 14.3m 떨어진 곳에서 최고 유속 0.75m/s가 발생되었으며, $6{\sim}6m$의 정사각형교각의 경우 교각으로부터 약 15.8m떨어진 곳에서 0.68m/s의 최대 유속이 발생하고 $6{\sim}6m$ 정팔각형교각의 경우 교각으로부터 약 16.2m떨어진 곳에서 0.65m/s의 최대유속이 발생하고, 마지막으로 $3{\sim}6m$ 장방형교각의 경우 교각으로부터 약 21m 떨어진 구간에서 0.63m/s의 최고 유속이 발생하는 것으로 나타났다. 대상유역의 길이가 길고, 유속이 낮으므로 유출지점까지 흘러내려가는 유사량보다 하천내에 유입된 유사가 그대로 퇴적되는 경우가 많아 24시간 분석결과 하상변동량은 퇴적량과 침식량을 합하여 약 0.22%정도 변동되는 것으로 나타났으며, 교각형상에 따른 하상변동특성으로 원형교각의 경우 세굴이 일어나는 지점은 교각에서 약 16.88m떨어진 지점까지 하상변동이 일어났으며, 정사각형 교각의 경우 교각에서 약 10.96m떨어진 지점까지, 정팔각형 교각의 경우 교각에서 약 6.32m떨어진 지점까지, 장방형 교각의 경우 교각에서 약 18.23m떨어진 지점까지 하상변동이 나타남을 알 수 있었다.

• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.713-727
• /
• 2018

This study is to develop an assessment system for stream physical environments by considering stream characteristics. Comprehensively, the descriptions of and steam classification, assessing reach selection, contents of assessment categories and indexes are summarized. Since the physical structure of stream is results of reaction by stream power, streams were classified into three types (as high gradient stream, mid gradient stream and low gradient stream) according to the slope of channel, the grain size of bed material and the characteristics of channel topography. The scale of assessment reach was selected based on 10 or 25 times of channel width according to typical characteristics such as interval of step or riffle and sinuosity in each stream type. The assessment indexes were organized into common indicators such as channel stability, flow status, cross-section shape, bank stability, channel alteration and stream crossing structure, and characteristic indicators by stream type such as effective habitats, bed embeddedness, diversity of flow and frequency of step or riffle. To evaluate the applicability, the assessment system was applied to 9 streams and the results were analyzed and presented.

• Korean Journal of Materials Research
• /
• v.8 no.7
• /
• pp.601-606
• /
• 1998

The $SrTi0_3$:Al, Pr red phosphors were prepared by solid state reaction method. Phosphor preparation parameters such as sintering temperature and time were optimized for the photoluminescence(PU intensity and the cathodoluminescence(CL) intensity. Powder samples showed the characteristic X-ray diffraction patterns of the perovskite structure and the average particle size of 3~5/$\mu\textrm{m}$ for particle size distribution(PSD) analysis. Also, scanning electron microscopy for the powder samples showed that the particles are reasonably crystallized with spherical shape. Especially, higher low voltage CL properties of $SrTi0_3$:Al, Pr phosphors than commercial $Y_2O_3$:Eu phosphors are expected to be applied for a low voltage field emission display(FED).

• The Research Journal of the Costume Culture
• /
• v.6 no.1
• /
• pp.136-148
• /
• 1998

This is a study on the change of the Medievalmen's underclothes. Underclothing includes all such articles, worn by either sex, as were completely or mainly concealed from the spectator by the external costume. Throughout the Middle Ages, the underclothing of both sexes possessed characteristic inherited from earlier times. Its function was purely utilitarian. It was not used to express class distinction and only very indirectly to enhance sex attraction. The idea of underclothes was associated with the idea of the body's sinfulness. Underclothes could also symbolize the discipline of humility. To appear clad only in underclothes was a voluntary form of selfabasement often practised by pilgrims. The notion that underclothes might express the spirit of the changing times, in sympathy with the outer clothing, did not enter the medieval mind. The length of the shirt was less than that of the modern garment, especially after the middle of the fourteenth century. The sleeves were somewhat full, without cuffs, and cut straight. During the second half of the twelfth century, when braies become definitely an undergarment. In the fourteenth century braies became shorter and shorter and the shirt could no longer be tucked in but hung outside over the thighs. After 1340 the costume on the surface somewhat resembling modern 'tights', began to reveal display the shape of the male leg as a form of sex attraction. By the close of the Middle Ages, braies had become less like loincloths, and more like modern bathing trunks. The peasant and laborer did not attempt to keep pace with the changes of fashion but, continued, as a rule, to wear the long braies of their forefathers. The higher ranks how this garment reflected the changes of the mode of outer costumes.