• 한국정보전자통신기술학회논문지
• /
• 제12권3호
• /
• pp.211-217
• /
• 2019

본 연구에서는 NHPP 모형을 적용한 Type-2 Gumbel 수명분포의 형상모수 변화에 따른 소프트웨어 개발비용모형에 관한 속성을 비교, 분석하였다. 소프트웨어 고장현상을 분석하기 위하여 모수추정은 최우추정법을 적용하였고, 비선형 방정식의 계산은 이분법을 사용하였다, 그 결과, 형상모수의 변화에 따른 비용곡선의 속성을 비교하였을 때 형상모수가 클수록, 소프트웨어 개발비용이 적고 또한, 방출시간도 가장 빠르다는 것을 알 수 있었다. 본 연구를 통하여, 소프트웨어 개발자들에게 소프트웨어 형상모수 변화에 따른 개발비용을 탐색하는데 도움을 줄 수 있으며, 더불어 소프트웨어 개발비용에 관한 속성을 파악하는데 필요한 사전정보을 제공할 수 있을 것으로 기대한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.169-172
• /
• 2009

Multiple scale modeling has been applied to predict defect shape change during the wire rod rolling process. The size difference between bloom and defect prevent using usual FEM approaches due to the enormous number of elements required to depict the defect. The newly developed multiple scale model can visualize defect shape changes during the multi stands rolling process. The defect positioned at the top and side of bloom are smoothed out but the one at the middle evolved as folding or remained as crack. This approach can be used for defect control with roll shape design and initial bloom shape.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.443-446
• /
• 2003

The vibration mode shape changed by the phase angle that can be controlled by phase-shifting ESPI system is discussed. For the phase-shifting ESPI experiment the stroboscopic illumination by using AOM(Acousto-Optic Modulator) is needed, and the initial phase angle can be adjusted by the program. The vibration mode shape is changed when the initial phase angle is changed. We examined the vibration mode shape change due to the initial phase angle change at each resonance frequency. Through this study, we found that in the vibration testing using phase-shilling ESPI the vibration mode shape is improved in the quality by adjusting exact phase angle and the error of the quantitative vibration analysis can be reduced.

• 대한한의학원전학회지
• /
• 제27권2호
• /
• pp.49-67
• /
• 2014

Subject : The Association between Extraordinary Organs(奇恒之腑) and Eight Extra Meridians(奇經 八脈). Objectives : This study research some special aspects of Extraordinary Organs and Eight Extra Meridians which differentiated from ordinary Organs and Meridians, and the association between Extraordinary Organs and Eight Extra Meridians. Methods : First, researched classification standard and physiological characteristics of Extraordinary Organs through studying various chapters of HuangdiNeijing. Second, researched The Association between Extraordinary Organs and Eight Extra Meridians through studying on the origin of Eight Extra Meridians in HuangdiNeijing. Third, from accompanying researching the subject of Cheon-gye(天癸) and human body shape, draw synthetic hypothesis on the relationship among ordinary Meridians and Organs, muscles and skins of body shape, Extraordinary Organs and Eight Extra Meridians. Results & Conclusions : The following conclusions could be drawn. 1. Extraordinary Organs afford background for shaping human body. This is same as the properties of the earth which afford background for shaping all creations. The physiological characteristics of Extraordinary Organs is intermediation and regulation between Ki(氣) of Five Viscera & six Bowels and shape of muscles & skins in human body. 2. The origin of Eight Extra Meridians could be found in HuangdiNeijing. The collateral Meridians of the Uterus and Epiglottis Meridian are specifically formulated to supplying for the Uterus or Epiglottis. From this we can draw The Association between Extraordinary Organs and Eight Extra Meridians, that is Eight Extra Meridians are specifically formulated to supplying for Extraordinary Organs. 3. The Cheon-gye(天癸) is doing significant function in Eight Extra Meridians supplying for Extraordinary Organs. Cheon-gye concerned to growth, secondary sexual characters, generative function, aging process. Theses are all concerned with the changing of human body shape. Cheon-gye urge to change the body shape with following the human life cycle. 4. Human body has vertical symmetry because preserve its shape from the gravitational force. Eight Extra Meridians place at the middle or flank axis of human body, thus do physiological function that assistant human body have vertical symmetry shape. The purpose of shaping vertical symmetry is securing space what the inner Twelve Regular Meridians and Five Viscera & six Bowels create there own physical changes. On the other hand the inner changes need deviation between left and right because of mobility and circulation of force. But human body change the shape in the process of growth, reproduction, aging. Eight Extra Meridians play role at time of these processing, thus they deeply concerned to human's life cycle and reproduction. 5. Eight Extra Meridians and Extraordinary Organs were named 'Extra' because of some special aspects which differentiated from ordinary Meridians and Organs. All they play role to have vertical symmetry shape of human body and maintain the shape, thus they deeply concerned to the change of human life cycle. These shaping maintaining and the change of human life cycle are very special aspects of human body. So they needed to differently cognize separate to the ordinary changes of Five Viscera & six Bowels and Twelve Meridians at inner space.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.327-333
• /
• 2003

Most of shape defects in steel strip are originated from the structure of rolling mill itself. For instance, strip crown occurs when the work roll is deformed by the bending moment induced on roll chocks. To get rids of the shape defects, it is necessary to increase the stiffness of rolling mill. The structure change of back-up roll is one of alternative ways to increase the mill stiffness without facility revamping from 4 high mill to 6 high mill. In this research work, the new back-up roll was developed and can be used in any type of 4 high mill to reduce the strip shape defects. The developed back-up roll consists of sleeve, arbor and phase angle adjusting system for arbor. The circumference of arbor is specially machined to adapt the strip width change during rolling. The experimental cold rolling test was done to prove the effectiveness of newly developed back-up roll. The experimental rolling results show that the new back-up roll has more powerful performance in reducing the shape defects than conventional back-up roll. It was also found that the new back-up roll has higher stability for shape control. In addition to, the only sleeve surface needs to be reground and changed in most cases, so that the maintenance cost can be greatly reduced.

• Journal of Information Technology Applications and Management
• /
• 제25권4호
• /
• pp.115-122
• /
• 2018

Software reliability has the greatest impact on computer system reliability and software quality. For this software reliability analysis, In this study, we compare and analyze the trends of the properties affecting the reliability according to the shape parameters of Erlang distribution based on the finite fault NHPP. Software failure time data were used to analyze software failure phenomena, the maximum likelihood estimation method was used for parameter estimation. As a result, it can be seen that the intensity function is effective because it shows a tendency to decrease with time when the shape parameters a = 1 and a = 3. However, the pattern of the mean value function showed an underestimation pattern for the true values when the shape parameters a = 1 and a = 2, but it was found to be more efficient when a = 3 because the error width from the true value was small. Also, in the reliability evaluation of the future mission time, the stable and high trend was shown when the shape parameters a = 1 and a = 3, but on the contrary, when a = 2, the reliability decreased with the failure time. Through this study, the property of finite fault NHPP Erlang model according to the change of shape parameter without existing research case was newly analyzed, and new research information that software developers can use as basic guideline was presented.

• 한국해안해양공학회지
• /
• 제3권1호
• /
• pp.21-28
• /
• 1991

본 연구는 경사면에서 탁질혼입에 의한 탁수괴 거동을 밀도차가 적은 염수를 이용하여 실험과 이론을 통하여 알아보았다. 염수괴의 형상특성, 길이 변화, 높이 변화, 이동속도 변화를 알아보았다. 그리고 염수괴의 거동을 Baines and Hofinger(1984)의 난류 Thermal 이론과 비교하여 보았다. 그 결과 실험치와 이론치는 거의 일치하고 있었다. 따라서 밀도차에 의한 탁수괴의 거동특성은 난류 Thermal 이론으로 재현할 수 있다는 것을 알았다.

• Journal of applied mathematics & informatics
• /
• 제30권3_4호
• /
• pp.381-393
• /
• 2012

In this paper, we show two ways of the time reparametrization of piecewise Pythagorean-hodograph $C^1$ Hermite interpolants. One is the time reparametrization with no shape change, and the other is that with shape change. We show that the first reparametrization does not depend on the boundary data and that it is uniquely determined by the size of parameter domain, up to the general cases. We empirically show that the second parametrization can cause the change of the shape of interpolant.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.314-317
• /
• 2006

In the present study, design methodologies for effective width of slabs in slab-column connections were evaluated in comparison with the experimental results on the full-scale slab-column connections. The design methodologies are as follows: the methodology proposed by Jacob S. Grossman and the methodology proposed by Choi & Song. The former does not predict the stiffness change of the slab-column connection due to the change in the column section shape and the latter overestimates the stiffness when edge length of the column section in the loading direction is long. Accordingly, the equation to calculate the effective width of slabs should be modified to reflect the effect of the change in the column section shape.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.335-340
• /
• 2001

It is important to model the mechanical structure precisely and reasonably in predicting the dynamic characteristics, controlling the vibration, and designing the structure dynamics. In the finite element modeling, the errors can be contained from the physical parameters, the approximation of the boundary conditions, and the element modeling. From the dynamic test, more precise dynamic characteristics can be obtained. Model updating using parameter modification is appropriate when the design parameter is used to analyze the input parameter like finite element method. Finite element analysis for cantilever and simply supported beams with uniform area and shape change are carried out as model updating examples. Mass and stiffness matrices are updated by comparing test and analytical modal frequencies. The result shows that the updated frequencies become closer to the test frequencies.