• 한국결정성장학회지
• /
• 제4권1호
• /
• pp.33-41
• /
• 1994

단결정 성장과정에서 고액계면의 위치와 형상이 결정의 품질에 영향을 준다는 사실은 이미 잘 알려져 있다. 따라서 이를 결정해 주는 노내 온도분포의 파악은 매우 중요하다. 본 연구에서는 VGF 단결정법을 대사응로 발열체의 온도만을 이용하여 노내 온도분포를 구할 수 있는 프로그램을 개발하였으며,이를 사용하여 지지봉 및 도가니의 재질과 크기가 고액계면의 형상에 미치는 영향을 검토해 보았다. 지지봉의 반경이 클수록, 열전도도가 작을수록 평활한 고액계면이 나타나 . 열전도도가 등방성을 가진 도가니의 경우, 열확산계수의 증가에 따라 고액계면이 더 오목해지는 경향을 보였다. PBN과 석영 도가니의 계산 결과 비교를 통하여 도가니 열전도돋의 이방성이 고액계면에 미치는 영향을 고찰해 본 결과, 계면의 위치에 따라서 다른 양상을 보인다는 것을 알았다.것을 알았다.

• 열처리공학회지
• /
• 제23권4호
• /
• pp.191-197
• /
• 2010

Zr addition is known as effective method to improve the anisotropy of steel due to the elongated MnS inclusions which are observed in hot forged steels. The aim of this research is to investigate the effect of Zr addition on the mechanical properties and manganese sulphide morphology of 0.27%C-Cr-Mo plastic mold steel. The ingots were prepared by vacuum induction melting and forged to ${\Phi}35mm$ round bar. Forged bars were quenched and tempered at $560{\sim}640^{\circ}C$ for 1 hour. Jominy test, microstructual observation, tensile test and Charpy impact test were conducted. The morphology of MnS inclusions was changed by Zr addition. The shape of MnS inclusions was not so much lengthened and controlled not to be elongated by Zr inclusions which surround the MnS inclusions. Tensile strength and yield strength of the tempered steels were not nearly affected by the addition of Zr, but elongation and reduction of area were decreased. Especially, the toughness of Zr added steels was deteriorated with increasing of Zr content. From the results of this study, it is assumed that anisotropy of steels was improved by the addition of Zr. However, impact toughness of the steel was significantly decreased by the excessive Zr addition (over 0.066%).

• 한국세라믹학회지
• /
• 제25권3호
• /
• pp.268-276
• /
• 1988

KCI을 사용한 용융염합성법에 의해 침상형$(Pb_{1-x}Ba_x)_{1-y}La_{2y/3}Nb_2O_6$ (PBLN)분말을 합성하고 합성분말의 형상에 미치는 Ba 및 La 치환의 영향을 조사하였다. 또 이 침상형 분말을 사용하여 doctor-blade법 및 hot-press 법에 의해 입자배향 세라믹스를 제작하고 유전적, 압전적, 광학적 성질을 조사하였다. 얻어진 PBLN 분말의 형상 및 입자배향 PBLN 세라믹스의 전기적 특성은 분말합성시의 열처리조건과 Ba 및 La 치환량에 따라 현저히 달랐다. 특히 PBLN 세라믹스의 유전율 및 전기기계결합계수는 입자배향 세라믹스 제작시의 가압방향에 따라 뚜렷한 이방성을 나타내었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.319-326
• /
• 2002

A p-version finite element model based on degenerate shell element is proposed for the analysis of orthotropic laminated plates. In the nonlinear formulation of the model, the total Lagrangian formulation is adopted with large deflection and moderate rotation being accounted for in the sense of von Karman hypothesis. The material model Is based on the Huber-Mises yield criterion and Prandtl-Reuss flow rule in accordance with the theory of strain hardening yield function, which is generalized for anisotropic materials by introducing the parameters of anisotropy. The model is also based on extension of equivalent-single layer laminate theory(ESL theory) with shear deformation, leading to continuous shear strain at the interface of two layers. The Integrals of Legendre Polynomials we used for shape functions with p-level varying from 1 to 10. Gauss-Lobatto numerical quadrature is used to calculate the stresses at the nodal points instead of Gauss points. The validity of the proposed p-version finite element model is demonstrated through several comparative points of view in terms of ultimate load, convergence characteristics, nonlinear effect, and shape of plastic zone

• 한국자기학회지
• /
• 제10권5호
• /
• pp.210-219
• /
• 2000

질화철(FeN)막을 이용한 FeN/Co/Cu/Co와 FeN/Co/Cu/Co/Cu/Co/FeN 다층막의 자기저항효과를 조사하였다. 질소유량이 0.4 sccm 이상인 조건에서 제작한 FeN막의 결정구조는 $\alpha$-Fe와 $\varepsilon$-Fe$_3$N상의 혼합상이며 침상구조인 $\varepsilon$-Fe$_3$N상에 의해 유도되는 형상자기이방성 때문에 자기저항효과가 관찰된다. 자기저항효과는 FeN막의 질소 유량과 두께에 따라서 달라지며 이는 FeN막의 $\varepsilon$-Fe$_3$N상에 의해 유도되는 형상자기이방성이 자유층과 고착층에 미치는 범위가 질소유량과 두께에 따라 달라지기 때문이다. 자유층인 Co막의 두께가 70 $\AA$인 조건에서 가장 우수한 자기저항비와 자기저항감도를 나타내며 자기저항비는 질소유량이 0.5 sccm이고 두께가 250 $\AA$인 조건에서 제작된 FeN/Co/Cu/Co/Cu/Co/FeN 다층막에서 3.2 %로 최대값을 나타낸다. 이 다층막의 3개의 자성층은 각기 다른 보자력을 갖고 있으므로 자기저항곡선상에 각각의 보자력 차이에 의한 step을 형성하며 MRAM 등으로 응용시 4개의 신호를 동시에 구현할 수 있을 것으로 기대된다.

• Steel and Composite Structures
• /
• 제12권4호
• /
• pp.303-324
• /
• 2012

This paper presents the mode-shape analysis of the cross-ply laminated composite cylindrical shallow shells. First, the kinematic relations of strains and deformation are given. Then, using Hamilton's principle, governing differential equations are developed for a general curved shell. Finally, the stress-strain relation for the laminated, cross-ply composite shells are obtained. By using some simplifications and assuming Fourier series as a displacement field, the governed differential equations are solved by the matrix algebra for shallow shells. Employing the computer algebra system called MATHEMATICA; a computer program has been prepared for the solution. The results obtained by this solution are compared with the results obtained by (ANSYS and SAP2000) programs, in order to verify the accuracy and reliability of the solution presented.

• 센서학회지
• /
• 제16권5호
• /
• pp.389-393
• /
• 2007

Soft ferromagnetic materials are very useful for many sensors using magnetic materials demanding high permeability, low coercivity and low hysteresis loss. Among them, FeCoSiBNi amorphous magnetic films show a good impedance change (about 5.01 %/Oe, at 10 MHz) by the exterinal magnetic field in this experiment. The magnetic films are produced by melt-spun method, one of the rapid solidification process. Ribbon shape wires were made from the films, and let them annealed in DC magnetic field to increase the maximum Giant Magneto Impedance ratio. Field annealing decreases the stress and changes the effective anisotropy. Thus, we can find that the impedance change (200.47 %) is improved and the fabricated magnetic wire has characteristics of good sensor element.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.281-284
• /
• 2007

The effect of Ca addition on the microstructure evolution and deformation behavior of AZ31 magnesium alloy produced by hot extrusion was investigated. For this purpose, Ca was added into AZ31 melts to the level of 0.7 and 2.0 wt.% Ca. Then, AZ31 base alloy and Ca modified AZ31 alloys were extruded at $383^{\circ}C$. Ca added alloys showed finer grain size and increased hardness value rather than AZ31 base alloy. After isothermal hot compression, the shape of tested specimen exhibited a noticeable anisotropy due to the crystallographic texture effect. The ratio of major and minor axes of ovality was not directly related to test condition and Ca amount. Flow stress level increases with the increase of Ca addition at temperature below $300^{\circ}C$ because of fine microstructure. However, at high temperature and low strain rate region ($400^{\circ}C$ and $10^{-3}s^{-1}$), reverse tendency was observed since main deformation mechanism changes from dislocation slip to grain boundary sliding or diffusional process at high temperature.

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.13-22
• /
• 2012

Forged and flat-bar rolled STD11 tool steel shows anisotropic dimensional change during heat treatment. The dimensional change in the rolling direction is larger than that in the transverse direction. The cause of the anisotropic dimensional change is that the steel is anisotropic in composition, microstructure and other properties. The decrease of anisotropic distortion in tool steel is important for making better precision cold working dies. In this study, the effect of ingot weight and hot rolling reduction ratio on the anisotropic dimensional change of STD11 during heat treatment has been studied. Dimensional change was evaluated by simulating a real heat treatment process, including gas quenching and tempering. Experimental results showed that all the rolled flat-bar products had anisotropic distortion to some degree, but the anisotropic distortion was reduced as hot rolling ratio increased. Ingot weight had a little effect on anisotropic distortion. Microstructural observation showed that the anisotropic dimensional change of STD11 tool steel was closely related to the amount, shape and distribution of coarse carbides.

• 한국자기학회지
• /
• 제17권4호
• /
• pp.172-177
• /
• 2007

셀(cell) 단위의 생체분자의 자성특성 검출을 위한 거대자기저항-스핀밸브(giant magnetoresistance-spin valves; GMR-SV) 바이오센서로서 미세 패턴된 모양에 따라 길이 방향과 폭 방향 용이축에 의존하는 자기저항 특성을 연구하였다. 바이오센서(biosensor)로서 사용할 스핀밸브 다층구조는 glass/NiO/NiFe/CoFe/Cu/CoFe/NiFe 이었다. 자성 다층박막의 일축이방성을 만들기 위해 증착시와 소자 패턴닝 후 진공 열처리를 $200^{\circ}C$에서 300 Oe 정도 외부자기장을 인가하였다. 형상자기이방성 효과를 고려하여 광 리소그래피 과정으로 얻은 미세 활성영역 패턴 사이즈는 $2{\times}5{\mu}m^2$로 정하였다. 2단자법으로 길이방향의 센싱전류와 폭 방향의 고정층의 용이축 방향 각도에 의존하는 자장민감도의 변화는 바이오센서 소자로서 활용에 중요한 요인임을 확인하였다.