• 제목/요약/키워드: shale gas well

검색결과 21건 처리시간 0.028초

셰일가스정 천이유동 생산자료분석의 기술적 고려사항 (Technical Consideration for Production Data Analysis with Transient Flow Data on Shale Gas Well)

  • 한동권;권순일
    • 한국가스학회지
    • /
    • 제20권1호
    • /
    • pp.13-22
    • /
    • 2016
  • 본 연구에서는 다단계 수압파쇄와 수평시추가 적용된 셰일가스정에서 생산자료의 유동형태에 따라 적절한 분석 방법과 궁극가채량을 산출하는 기법을 결정하는 방법을 정리한 흐름도를 제안하였다. 또한 1차 천이유동만이 나타나는 현장자료에 대해 생산천이유동 분석을 수행할 때 고려해야 하는 사항들을 제안하였다. log-log 그래프와 시간제곱근 그래프 분석을 통해 생산자료의 유동 특성을 분류할 수 있고, 이 결과, 1차 천이유동만이 나타나는 생산자료는 이 유동이 종료되는 시점을 정확히 예측하여 이 시점을 기준으로 생산성을 각각 예측하여야 한다. 이 시점은 미세탄성파 탐사자료 해석을 통해 균열자극부피의 면적을 계산함으로써 산출할 수 있다. 공저압력자료나 미세탄성파 탐사자료가 없다면 셰일가스정에 적절한 경험적 방법을 활용하여 생산성을 예측할 수 있다. 생산기간이 짧은 자료는 상대적으로 생산기간이 긴 인접 생산정의 자료를 활용하여 생산기간의 적절성을 평가한 후 필요하다면 생산초기 자료를 제외하고 분석하는 것이 정확도를 향상시킬 수 있다. 또한 미세탄성파 탐사자료 해석에 의해 산출된 SRV는 분석방법이나 분석자의 주관에 의해 과대, 과소 평가될 수 있기 때문에 파쇄 단계, 파쇄유체 주입량, 생산성 분석을 통한 적절성평가를 수행하여 필요한 경우, 저류층 시뮬레이션, 균열모델링, 생산천이분석을 통해 재산정하는 것이 필요하다.

Stress field interference of hydraulic fractures in layered formation

  • Zhu, Haiyan;Zhang, Xudong;Guo, Jianchun;Xu, Yaqin;Chen, Li;Yuan, Shuhang;Wang, Yonghui;Huang, Jingya
    • Geomechanics and Engineering
    • /
    • 제9권5호
    • /
    • pp.645-667
    • /
    • 2015
  • Single treatment and staged treatments in vertical wells are widely applied in sandstone and mudstone thin interbedded (SMTI) reservoir to stimulate the reservoir. The keys and difficulties of stimulating this category of formations are to avoid hydraulic fracture propagating through the interface between shale and sand as well as control the fracture height. In this paper, the cohesive zone method was utilized to build the 3-dimensional fracture dynamic propagation model in shale and sand interbedded formation based on the cohesive damage element. Staged treatments and single treatment were simulated by single fracture propagation model and double fractures propagation model respectively. Study on the changes of fracture vicinity stress field during propagation is to compare and analyze the parameters which influence the interfacial induced stresses between two different fracturing methods. As a result, we can prejudge how difficult it is that the fracture propagates along its height direction. The induced stress increases as the pumping rate increasing and it changes as a parabolic function of the fluid viscosity. The optimized pump rate is $4.8m^3/min$ and fluid viscosity is $0.1Pa{\cdot}s$ to avoid the over extending of hydraulic fracture in height direction. The simulation outcomes were applied in the field to optimize the treatment parameters and the staged treatments was suggested to get a better production than single treatment.

Economic Impacts of Energy Development on Domestic Economy

  • Hojjat, Tahereh Alavi
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제1권1호
    • /
    • pp.41-45
    • /
    • 2014
  • New technologies and techniques to extract natural gas and gas liquids, as well as petroleum, from shale rock have greatly altered expectations for North America's capacity to produce energy products. As a result of innovations such as hydraulic fracturing, some government, industry, and academic observers have predicted that the United States will soon become energy self-sufficient and possibly become a net exporter of natural gas and petroleum. This paper will cover literature review and measure the potential impacts on economic growth and development. Fracking, renewable energy are just a few of the things that have reshaped the energy picture over the past 20 years, how much it will change in the next 20 years and the impacts on the economy will be discussed.

산업용 배기가스를 이용한 가스 하이드레이트로부터의 천연가스 생산 연구 (Study of Producing Natural Gas From Gas Hydrate With Industrial Flue Gas)

  • 서유택;강성필;이재구
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 추계학술대회 논문집
    • /
    • pp.188-191
    • /
    • 2008
  • There have been many methods for producing natural gas from gas hydrate reservoirs in permafrost and sea floor sediments. It is well knownthat the depressurization should be a best option for Class 1 gas hydrate deposit, which is composed of tow layers: hydrate bearing layer and an underlying free gas. However many of gas hydrate reservoirs in sea floor sediments are classified as Class 2 that is composed of gas hydrate layer and mobile water, and Class 3 that is a single gas hydrate layer. The most appropriate production methods among the present methods such as thermal stimulation, inhibitor injection, and controlled oxidation are still under development with considering the gas hydrate reservoir characteristics. In East Sea of Korea, it is presumed that the thick fractured shale deposits could be Class 2 or 3, which is similar to the gas hydrate discovered offshore India. Therefore it is needed to evaluate the possible production methods for economic production of natural gas from gas hydrate reservoir. Here we would like to present the production of natural gas from gas hydrate deposit in East Sea with industrial flue gases from steel company, refineries, and other sources. The existing industrial complex in Gyeongbuk province is not far from gas hydrate reservoir of East Sea, thus the carbon dioxide in flue gas could be used to replace methane in gas hydrate. This approach is attractive due to the suggestion of natural gas productionby use of industrial flue gas, which contribute to the reduction of carbon dioxide emission in industrial complex. As a feasibility study, we did the NMR experiments to study the replacement reaction of carbon dioxide with methane in gas hydrate cages. The in-situ NMR measurement suggeststhat 42% of methane in hydrate cages have been replaced by carbon dioxide and nitrogen in preliminary test. Further studies are presented to evaluate the replacement ratio of methane hydrate at corresponding flue gas concentration.

  • PDF

생산자료 분석기법을 이용한 셰일가스정 생산거동 연구 (Study on Production Performance of Shale Gas Reservoir using Production Data Analysis)

  • 이선민;정지헌;신창훈;권순일
    • 한국가스학회지
    • /
    • 제17권4호
    • /
    • pp.58-69
    • /
    • 2013
  • 본 연구에서는 캐나다 셰일가스전에 위치한 2개의 생산정에 대해 생산특성에 따라 적절한 생산자료 분석기법을 이용하여 분석을 수행하였다. Case A 생산정의 경우 생산자료가 매우 가변적으로 나타나 시간과 중첩시간을 적용하여 비교분석을 실시하였다. 유동영역을 구분하기 위해 생산자료를 로그-로그 그래프에 도시한 결과 천이유동구간만 나타났다. 시간과 중첩시간을 적용하여 자극을 받은 저류층 면적이 각각 180, 240 acres로 산출되었고, 원시가스부존량은 15, 20 Bscf로 계산되었다. 그러나 산출된 저류층 면적은 경계영향유동자료로부터 산출된 것이 아니기 때문에 최소 값으로 판단된다. 이에 저류층 면적과 감퇴지수에 대한 생산성 예측을 수행하였다. 그 결과 감퇴지수가 0.5, 1로 커질수록 궁극가채량이 1.2배와 1.4배로 증가하였다. 또한 저류층 면적이 240에서 360 acres로 커지면 궁극가채량이 1.3배 증가되는 것을 확인할 수 있었다. Case B의 고압 저류층에 위치한 생산정은 상부지층압에 따른 지층압축률과 투과도를 적용하여 분석하였다. 지역학적 영향을 적용한 경우와 아닌 경우를 비교한 결과, 저류층 면적은 1.4배, 원시가스부존량이 1.5배로 증가하였다. 셰일 가스전 현장자료에 대한 분석 결과, 분석 방법에 따라 원시가스부존량, 궁극가채량 등 향후 생산성 예측이 크게 달라지므로 생산자료에 따라 유사시간, 중첩시간, 지역학적 분석 등의 적절한 분석방법을 적용하여야 정확한 생산자료 분석이 가능할 것으로 판단된다.

DFIT 자료 해석을 통한 저류층의 투과도 및 초기압력 추정 (Estimation of Permeability and Initial Pressure in Reservoir by DFIT Data Analysis)

  • 김태홍;이성준;이근상
    • 터널과지하공간
    • /
    • 제23권3호
    • /
    • pp.169-179
    • /
    • 2013
  • 치밀 또는 셰일가스층과 같은 비전통 저류층에서 물성을 구할 때 기존의 전통 가스정 시험법을 적용하면 올바른 결과값을 얻을 수 없다. 일반적으로 셰일가스 저류층에서는 지층의 저투과성으로 인해 유동 속도가 느려 방사형 유동 구간이 나타나기까지의 시간이 매우 오래 걸리며 수압파쇄 후에는 방사형 유동 구간이 전혀 나타나지 않을 수도 있다. 이로 인해 시험 비용이 많이 들 뿐만 아니라 결과값의 정확도 또한 매우 낮다. 이러한 이유로 셰일가스 저류층 물성 분석법으로 DFIT(diagnostic fracture injection test)이 새롭게 주목받고 있다. 수압파쇄 전에 수행되는 DFIT은 셰일가스의 중요성이 커져감에 따라 저류층의 물성을 얻기 위한 가장 실용적인 방법 중의 하나로 알려져 있다. DFIT 데이터를 분석하는 방법에는 여러 가지가 있으며 한 가지 방법으로는 데이터를 잘못 분석할 수 있기 때문에 다양한 방법을 통해서 종합적으로 물성을 분석하는 것이 매우 중요하다. 본 연구에서는 이러한 다양한 DFIT 분석법들에 대해 설명하고 이를 통해 3개 저류층의 DFIT 데이터에서 여러 가지 분석법들이 어떻게 적용되는지 비교, 분석하여 정확한 저류층 물성을 얻고자 하였다.

The technological state of the art of wave energy converters

  • GURSEL, K. Turgut
    • Advances in Energy Research
    • /
    • 제6권2호
    • /
    • pp.103-129
    • /
    • 2019
  • While global demand for energy increases annually, at the same time the demand for carbon-free, sulphur-free and NOx-free energy sources grows considerably. This state poses a challenge in the research for newer sources like biomass and shale gas as well as renewable energy resources such as solar, wind, geothermal and hydraulic energy. Although wave energy also is a form of renewable energy it has not fully been exploited technically and economically so far. This study tries to explain those reasons in which it is beyond doubt that the demand for wave energy will soon increase as fossil energy resources are depleted and environmental concerns gain more importance. The electrical energy supplied to the grid shall be produced from wave energy whose conversion devices can basically work according to three different systems. i. Systems that exploit the motions or shape deformations of their mechanisms involved, being driven by the energy of passing waves. ii. Systems that exploit the weight of the seawater stored in a reservoir or the changes of water pressure by the oscillations of wave height, iii. Systems that convert the wave motions into air flow. One of the aims of this study is to present the classification deficits of the wave energy converters (WECs) of the "wave developers" prepared by the European Marine Energy Center, which were to be reclassified. Furthermore, a new classification of all WECs listed by the European Marine Energy Center was arranged independently. The other aim of the study is to assess the technological state of the art of these WECs designed and/or produced, to obtain an overview on them.

복합역산을 이용한 물리검층자료로부터의 셰일성 사암 저류층의 지층 평가 (Formation Estimation of Shaly Sandstone Reservoir using Joint Inversion from Well Logging Data)

  • 최연진;정우근;하지호;신성렬
    • 지구물리와물리탐사
    • /
    • 제22권1호
    • /
    • pp.1-11
    • /
    • 2019
  • 물리검층은 시추공을 이용하여 저류층의 여러 물성을 측정하는 것으로, 암석물리모델 관계식을 이용하여 공극률, 유체포화도 등의 저류층 특성을 파악하는데 활용되어 왔다. 물리검층자료의 분석은 저류층의 조건과 특성에 맞는 적당한 암석물리모델을 선정하고, Archie식이나 시만독스법 등을 활용하여 얻은 결과를 비교함으로써 가장 신뢰성 있는 저류층 물성을 결정하게 된다. 이 연구에서는 기존에 제시된 사암 저류층에서의 물리검층자료 복합역산 알고리즘을 바탕으로, 셰일성 사암 저류층의 물성을 평가하기 위한 복합역산 알고리즘을 개발하였다. 셰일의 양을 변수로 하는 암석물리모델 관계식을 제안하였으며, 야코비 행렬을 구성하고 민감도 분석을 수행하여 물리검층자료와 모델변수의 관계를 파악하였다. 확률론적 방법을 이용한 최소제곱법을 적용하여 복합역산을 수행하였다. 개발한 알고리즘은 Colony 가스사암 지역에서 얻은 물리검층자료에 적용하였으며, 그 결과를 기존에 활용되는 시만독스법과 사암 저류층에서의 복합역산 결과와 비교해 보았다.

중국의 광물자원 탐사개발 관련 최신 정책 고찰 (Review of the Current Policy Related to Exploration and Development of Mineral Resources in China)

  • 김성용;배준희;이재욱;허철호
    • 자원환경지질
    • /
    • 제49권3호
    • /
    • pp.201-212
    • /
    • 2016
  • 국제 정치 경제 상황의 급변에 따라 광물에너지자원 안정적 확보의 문제가 점점 커지고 있기에, 중국은 안정적인 광물에너지자원 확보를 위한 전략과 정책 수립에 만전을 가하고 있다. 중국은 희토류수출 쿼터제 폐지이후에 희토류산업 정책시행 방침을 수립하였고, 6대 희토류기업이 전국의 모든 희토류 광산 및 정련제련기업을 통합하고자 한다. 중국은 비전통 석유 가스 탐사 개발 투자를 늘리고 적극적인 기술연구개발 등을 통해 중국내 에너지 안보를 제고하고자 하고, 세계 최대의 셰일가스 부존국가로서 상업생산을 증진하기 위한 기술개발과 조사 탐사활동에 매진하고 있다. 중국은 해외에서 안정적인 자원 확보를 위해 장기계약 추진과 지분투자 또는 공동투자 벤처를 만들고 있다. 중국은 경제발전과 연동된 자원산업 발전전략으로는 자원사업과 환경산업 발전전략의 통합, 자원관리 국제화, 공급선 다양화 및 고도화, 산업연계전략 강화, 집단화 및 다각화 전략을 제시하고 있다.

남해 대륙붕 제주분지의 3-D 석유시스템 모델링 (3-D petroleum system modeling of the Jeju Basin, offshore southern Korea)

  • 손병국;이호영
    • 지질학회지
    • /
    • 제54권6호
    • /
    • pp.587-603
    • /
    • 2018
  • 남해 대륙붕 제주분지의 각 퇴적층에 대한 심층 구조도를 작성하고 이를 기반으로 3-D 석유시스템 모델링을 수행하여, 이 지역의 석유와 가스의 생성과 배출, 그리고 이동과 집적에 대하여 분석하였다. 최하부 퇴적층인 에오세층을 근원암으로 설정하였으며, 하천-호수의 퇴적환경을 고려하여 타입 II와 III가 혼합된 케로젠으로부터 석유와 가스가 생성되는 것으로 입력하여 모델링을 실시하였다. 초기 유기탄소 함량은 기존의 시추공 자료들과 퇴적환경을 고려하여 4%로 입력하였다. 모델링 결과 많은 양의 석유와 가스가 생성되는 지역은 제주분지 내 한일공동개발광구(Joint Development Zone; 이하 JDZ) 4소구 서쪽지역으로, 20 Ma에 많은 양의 석유와 가스가 이곳의 근원암으로부터 배출되어 상위의 저류층으로 이동하였다. JDZ 4소구 지역의 근원암에서 배출되어 나온 석유와 가스는 주변에 이미 형성되어 있는 크고 작은 폐쇄형 유망구조(closure)로 이동하여 집적되었다. JDZ 1소구와 2소구가 접한 지역의 동쪽부분도 석유와 가스가 많이 생성되는 지역이다. 이곳에서 생성된 석유와 가스는 10 Ma에 주로 배출되었으며 근원암에서 배출된 석유와 가스는 상위의 퇴적층으로 이동하여 집적되었다. JDZ 1소구와 2소구가 접한 지역은 JDZ 4소구 지역보다 석유와 가스의 배출이 상대적으로 늦게 이루어지고 저류암으로의 이동도 상대적으로 늦게 나타나는 것으로 모델링되었다. 석유의 경우는 비교적 짧은 수평거리를 이동하는 것에 비하여 가스의 경우는 상대적으로 먼 수평거리를 이동하였으며 수직이동도 활발하였을 것으로 추정된다. 석유와 가스의 이동이 활발했던 시기는 마이오세 시기이며 이때는 광역적인 덮개암이 형성되기 이전이므로 많은 양의 석유와 가스가 지표로 유출되었을 가능성이 있다. 그러나 올리고세층과 마이오세층은 사질암과 이질암이 교호되는 지층으로, 폐쇄형 유망구조가 잘 형성된 곳에서는 석유와 가스가 집적된 것으로 모델링 되었다.