• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1809-1812
• /
• 2008

지하방수로는 도시의 지하에 대규모 수로 터널을 시공하여, 도시 지역에 발생한 집중 호우를 초기에 배제하여 제내지 침수 피해를 줄이는 목적으로 사용되는 대표적인 구조적 홍수 피해 경감 대책이다. 효과적으로 침수 피해를 줄일 수 있을 뿐만 아니라, 특히 지하에 설치되어 토지 수용에 대한 부담이 줄어들기 때문에 일본 등지에서 최근 주요 홍수 방어 대책으로 활용되고 있다. 지하방수로 유입부는 크게 접근수로, 유입구, 수직 갱도(vertical shaft)로 구분되며, 접근 수로를 통하여 유입된 흐름은 유입구를 통하여 가속된 후 수직 갱도로 유입되게 된다. 따라서 지하방수로의 배제 능력을 평가하기위해서는 유입구에서의 유량 및 흐름 특성을 정확히 평가하는 것이 매우 중요하다. 나선식 종경사형 유입구(inclined spiral intake)는 지하방수로 유입구 중 가장 일반적으로 사용되는 형식으로 나선식 유입구의 한 형태로 유입구의 외측 또는 중앙선을 따라서 일정한 경사를 주어 사류 유입 흐름을 유도함으로서 유량 배제 효율을 높인 형태이다. 나선식 종경사형 유입구도 일반적인 나선식 유입구와 마찬가지로 접근수로 수위를 측정하여 유입량을 예측할 수 있다. 본 연구에서는 수리 모형 실험을 통하여 나선식 종경사형 유입구에 대한 수위-유입량 관계를 검토하였다. 평탄한 입구를 가지는 안내벽이 있는 형식의 유입구 모형을 이용하여 수위-유입량 관계를 검토하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.173-178
• /
• 2003

The study was performed to understand combustion characteristics of the slinger combustor. Liquid fuel is discharged radially outwards through injection holes drilled in the high speed rotating shaft. We observed atomizing characteristics with variation of fuel nozzle rotating speed by using PDPA system. The mean drop diameter highly depends on fuel nozzle rotating speed. In KARI combustion test facility, Ignition and combustion tests were performed by using real scale combustor. In the test results, ignition and combustion efficiency were increased according to increasing fuel nozzle rotating speed. The measured radial temperature distribution at the combustor exit shows stable and fairly good distribution.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.541-544
• /
• 2002

The turbine performance test of an axial-type turbine is carried out with various axial gap distances between the stator and rotor. The turbine is operated at the low pressure and speed, and the degree of reaction is 0.373 at the mean radius. The axial-type turbine consists of ons-stage and 3-dimensional blades. The chord length of rotor is 28.2mm and mean diameter of turbine is 257.56mm. The power of turbo-blower for input power is 30kW and mass flow rate is $340m^3/min\;at\;290mmAq$ static-pressure. The RPM and output power are controlled by a dynamometer connected directly to the turbine shaft. The axial gap distances are changed from a quarter to two times of stator axial chord length, and performance curves are obtained with 7 different axial gaps. The efficiency is dropped about $5{\%}$ of its highest value due to the variation of axial gap on the same non-dimensional mass flow rate and RPM, and experimental results show that the optimum axial gap is 1.0-1.5Cx.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2001.04a
• /
• pp.54-58
• /
• 2001

In order to Improve the performance of a free power turbine type gas turbine engine by injecting the atomized water into a compressor inlet., a study on Moisture Air Turbine (MAT) cycle was proposed. Compressor work by air-water mixtures in phase change was theoretically considered, and it was found that the water evaporation might reduce the compressor work. Cycle model calculations predicted that power increments of 21.7%, 20.2% and 18.4% by 1.5% water to the air flow rate at the compressor intake with rotational shaft speeds of 1000, 1210, 1350 rps were obtained, and also thermal efficiency due to the reduction of compressor work was improved.

• New & Renewable Energy
• /
• v.8 no.2
• /
• pp.44-51
• /
• 2012

The aim of this paper is to examine the hydraulically optimized camber of a blade. Prior studies have tried to determine the sound method of design on small-hydro turbines. These have appeared to realize a reasonably efficient small-hydro turbine. Nonetheless, specific and accurate design data have not as yet been established for the shape of the runner blade. Hence, this study examines the performance characteristic of an axial propeller turbine with 0~8% camber variations. The results of output power, efficiency, and pressure distribution of the turbine are graphically depicted. The definition of camber refers to the NACA airfoil. The commercial finite element analysis (FEA) packages, ANSYS, and CFX are used in this study. The results revealed the performance characteristics on small-hydro turbine and suggested a highly efficient section shape of the runner.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.677-680
• /
• 2003

The control of the SRM(Switched Reluctance Motor) is usually based on the non-linear inductance profiles with positions. So determination of optimal switching angle is very different. we present self-tuning control of SRM for maximum torque and efficiency with phase current and shaft position sensor During the sample time, micro-controller checks the number of pre-checked pulse. After micro-controller calculates between two data, it move forward or backward turn-off angle. When the turn-off angle is fixed optimal turn-off angle, turn-on angle moves forward or backward by a step using self-tuning control method. And then, optimal turn-off angle is searched once again. As such a repeating process, turn-on/off angle is moves automatically to obtain the maximum torque and efficiency. The experimental results are presented to validate the self-tuning algorithm.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.894-898
• /
• 2007

지하방수로는 도시의 지하에 대규모 수로 터널을 시공하여, 도시 지역에 발생한 집중 호우를 초기에 배제하여 제내지 침수 피해를 줄이는 목적으로 사용되는 대표적인 구조적 홍수 피해 경감 대책이다. 효과적으로 침수피해를 줄일 수 있을 뿐만 아니라, 특히 지하에 설치되어 토지 수용에 대한 부담이 줄어들기 때문에 일본 등지에서 최근 주요 홍수 방어 대책으로 활용되고 있다. 지하방수로 유입부는 크게 접근수로, 유입구, 수직 갱도(vertical shaft)로 구분되며, 접근 수로를 통하여 유입된 흐름은 유입구를 통하여 가속된 후 수직 갱도로 유입되게 된다. 따라서 지하방수로의 배제 능력을 평가하기위해서는 유입구에서의 유량 및 흐름 특성을 정확히 평가하는 것이 매우 중요하다. 나선식 유입구(spiral intake)는 지하방수로 유입구 중 가장 일반적으로 사용되는 형식으로 일반적으로 접근수로 수위를 측정하여 유입량을 예측할 수 있다. 본 연구에서는 수리 모형 실험을 통하여 나선식 유입구에 대한 수위-유입량 관계를 검토하였다. 평탄한 입구를 가지는 안내벽이 있는 형식의 나선식 유입구 모형을 이용하여 수위-유입량 관계를 검토하였다. 또한 측정된 수위 및 유입량을 바탕으로 기존 연구자들이 제시한 안내벽이 없는 형식의 나선식 유입구에 대한 수위-유입량 관계와 비교 검토하였다. 검토 결과 안내벽이 있는 형식의 나선식 유입구는 안내벽이 없는 경우에 비하여 유량 배제 효율이 떨어지는 것으로 나타났다.

• Journal of the Korean Magnetics Society
• /
• v.20 no.6
• /
• pp.234-238
• /
• 2010

Solenoid diaphragm fuel pump, which to replace mechanical fuel pump system by utilizing cam-shaft driving force, is in the spotlight for being a high efficient green car component. However, there is a drawback in power consumption as a solenoid diaphragm fuel pump only relies on solenoid for its flux needed in reciprocating motion. Therefore, this research proposes permanent magnet type VCM (Voice Coil Motor) fuel pump system to minimized power consumption. Furthermore, the study compares and analyzes power consumption and dynamic performance between the current and the former solenoid diaphragm pump by conducting finite element analysis with the commercial electromagnetic solver, MAXWELL.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.4
• /
• pp.325-332
• /
• 2005

This paper addresses the development of a scroll expander for power generation from relatively low temperature steam source. It has a double-sided orbiting scroll member so that no thrust bearing is needed to support the base plate of the orbiting scroll. Three power transmission shafts are placed at the periphery of the orbiting scroll base plate, and these shafts can also function as anti-rotation devices. Final output is obtained from the main central shaft engaged with the three power transmission shafts through gear assembly. The clearance between the fixed and orbiting scroll elements was estimated by comparing measurement of the mass flow rate with calculation results of a computer simulation. Due to large clearance, the expander total and volumetric efficiencies were measured to be $34\%\;and\;43\%$, respectively. It has been shown through the computer simulation that the total and volumetric efficiencies could be improved to $65\%\;and\;83\%$, respectively, if the current clearance is reduced by half.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.889-894
• /
• 2008

Exhaust system used in toilet and cooking place of high riser public house is roof fan of two basic types : natural roof ventilator and natural/forced roof ventilator. Natural/forced roof ventilator has a motor in the rotary shaft. There are many high riser public house in Korea. These buildings were not viewed as being major contributors to exhaust pollutants producted in indoor. It was because many engineers thought that exhaust in high riser building depend on stack effect. This study investigates on stack pressure determined by exterior pressure and the difference pressure control in exhaust stack used in high riser public house. This paper focuses mainly on the effect of the time interval for power supply of motor installed in roof fan with function of natural wind velocity and of exhaust air volume of toilet. It is observed there are higher exhaust efficiency than the existing natural roof ventilator.