• 제목/요약/키워드: shade treatment

검색결과 148건 처리시간 0.026초

교정치료 후 비심미적인 상악 전치부 비율을 가진 환자에서 체계적인 진단 및 치료과정을 통해 심미성이 개선된 보철 수복 증례 (Esthetic improvements through systematic diagnosis and treatment procedures in patients with unesthetic maxillary anterior teeth proportion after orthodontic treatment: Case report)

  • 이성민;최유성
    • 대한치과보철학회지
    • /
    • 제53권3호
    • /
    • pp.262-275
    • /
    • 2015
  • 상악 전치부와 같은 심미성이 요구되는 부위의 치료 시에는 건강하고, 주위조직과 조화를 이루며 매력적인 미소선의 형성을 염두에 두어야 한다. 이에 관하여 미소선, 연조직 및 경조직의 형태뿐 아니라 치아의 해부학적 형태와 비율 또한 고려하여야 한다. 상악 측절치의 왜소치(peg lateralis)로 인한 치간이개 및 부적절한 치은 형태로 인해 비심미적인 상악 전치부 비율을 가진 환자에서는 교정치료만으로 심미적 수복이 이루어지기 힘들 수 있다. 이런 경우, 교정치료가 끝난 이후 치아-치은-안면 구도에서의 진단 및 분석을 통한 치은절제술 및 보철적 수복을 통해 치아간의 근/원심, 폭/길이 비율을 개선시켜야 심미적으로 만족할 만한 결과를 얻어낼 수 있다. 또한, 상악 측절치의 왜소치(peg lateralis) 치아 비율 개선을 위한 보철물 제작 시 치질삭제가 적으며 인접치와 유사한 색조가 재현 가능하고 투명도가 높은 도재 라미네이트 비니어(Porcelain laminate veneer, PLV)가 선호되고 있다. 본 증례에서는 두 명의 20세 여자 환자로 교정치료 후 상악 측절치의 왜소치로 인한 치간이개 및 부적절한 치은 형태로 인해 비심미적인 상악 전치부 비율을 가진 환자에서의 체계적인 진단 및 치료과정을 통해 심미성이 개선된 보철 수복 증례를 보고하고자 한다.

차즈기(Perilla frutescens var. acuta)의 생육에 미치는 광도의 영향 (Effect of Light Intensity on the Growth of Perilla frutescens var. acuta)

  • 이종석;박영민;홍정
    • 한국환경복원기술학회지
    • /
    • 제7권3호
    • /
    • pp.73-77
    • /
    • 2004
  • 차즈기의 관상가치 증진 및 광도에 따른 생육반응을 알아보기 위하여 실험을 실시한 결과 차광정도에 따라 생육상태가 매우 다르게 나타났다. 초장, 수관폭, 엽병장, 엽장, 엽폭, 줄기굵기, 건물중 등 대부분이 30% 차광 시에 높게 나타나 생육이 가장 좋았으며, 차광율이 높아질수록 모두 감소하였다. 엽록소함량도 30% 차광시에 가장 높았으며, 안토시아닌함량의 경우 70% 차광시에만 감소하였을 뿐 나머지 처리구에서는 큰 차이가 없었다. 또한 70% 차광 시에는 엽색이 암자적색에서 황록색으로 변하였고, 생육이 저조하였을 뿐만 아니라 식물체가 도복하여 차즈기 고유의 관상가치가 떨어지는 결과를 보였다.

Controlling Mikania micrantha HBK: How effective manual cutting is?

  • Rai, Rajesh Kumar;Sandilya, Madan;Subedi, Rajan
    • Journal of Ecology and Environment
    • /
    • 제35권3호
    • /
    • pp.235-242
    • /
    • 2012
  • Mikania micrantha, a neo-tropical vine, is spreading rapidly in the tropical part of Nepal and is now threatening the rural ecosystem including biodiversity and rural livelihoods. However, no attempt has been made to control the spread of M. micrantha. As a result, the vines are spreading freely and rapidly. After a thorough literature review and assessment of forest management practices, we proposed a manual cutting method, as it suits the Nepalese situation for several reasons: required labor is readily available, as local communities are managing forest patches, and the method does not have any potential adverse effects on non-target native species. Experimental plots were laid out in August 2011 to examine the effectiveness of manual cutting. Two different site types based on canopy coverage were selected and divided into three blocks based on cutting strategy. Four treatments were assigned across the experimental plots following a complete block design. We harvested above-ground biomass according to the assigned treatment. The results suggested that there should be at least two consecutive cuttings within a 3-week interval before flowering, and that three consecutive cuttings resulted in 91% mortality of the vines. In addition, cutting promoted regeneration of native plant species. Employing regular cutting operations can modify understory shade enhancing regeneration of native species, which is a desirable condition to constrain proliferation of M. micrantha. Periodic cuttings reduced the competitiveness of M. micrantha regardless of canopy openness, but native ground cover should be retained.

Measurement of ecological niche of Quercus aliena and Q. serrata under environmental factors treatments and its meaning to ecological distribution

  • Lee, Seung-Hyuk;You, Young-Han
    • Journal of Ecology and Environment
    • /
    • 제35권3호
    • /
    • pp.227-234
    • /
    • 2012
  • Quercus aliena and Q. serrata are both occur as natural vegetation alongside natural freshwater bodies of the southern Korea Peninsula. Q. serrata dominates over Q. aliena as secondary forest vegetation in the present day. In order to explain these natural distributional traits of the oak species, we conducted some experiments with oak seedlings which treated with major important environmental resources, including light, moisture and nutrients, under controlled conditions. We then measured the ecological niche breadths and overlap from 15 eco-morphological characteristics. The ecological niche breadth of Q. aliena and Q. serrata were higher in terms of the nutrient factor applied, but was lower terms of light. The niche breadth of Q. serrata was wider than that of Q. aliena in light and moisture exposure. On the other hand, the niche breadth of Q. aliena was similar with that of Q. serrata in terms of the nutrient factor applied. These results imply that Q. serrata has a broader ecological distribution in over a wider variety of light and moisture environments than that of Q. alien. Ecological niche overlap between two oak species was the widest in terms of the light treatment factor applied, and narrowest in terms of moisture. This response pattern was also verified by cluster and principle component analysis. These results suggest competitive interactions between Q. serrata and Q. aliena seedlings may be higher for light resources than moisture or nutrient resources, and that Q. serrata is more shade tolerant than Q. aliena.

밤나무에 대한 온도, 광 및 질소시비 조건과 기존 피해 잎이 주둥무늬차색풍뎅이(Adoretus tenuimaculatus) 성충의 유인에 미치는 영향 (Effect of Light, Temperature and Nitrogen Fertilization and Damaged Leaf on the Feeding of Chestnut Brown Chafer, Adoretus tenuimaculatus (Coleoptera: Scarabaeidae))

  • 이동운;추호렬;이상명;이영한
    • 아시안잔디학회지
    • /
    • 제13권3호
    • /
    • pp.159-170
    • /
    • 1999
  • Preference of chestnut brown chafer (CBC), Adoretus tenuimaculatus was examined from chestnut leaves which were treated with different light condition, temperature and nitrogen fertilization. More CBC was attracted to leaves which grown at $30^{\circ}C$ than grown at $20^{\circ}C$,$ 25^{\circ}C$ and in the field. When attracted number of CBC was compared among full sunlight-grown, cloth shaded-grown and dark-grown plants, 4.0 in full sunlight grown and 5.0 in dark-grown plants. Amount of nitrogen fertilizer did not influence CBC feeding. The attractiveness of undamaged leaves with non-feeding beetles, leaves with feeding damaged, and leaves with artificial damaged was compared in replicated laboratory trials by placing the treatments in the petri-dish and counted the number of beetles that landed on the plants after 6 hr treatment. The highest number of beetles was attracted to chestnut leaf with feeding damaged ($7.7\pm$0.6) than undamaged leaf with non-feeding beetles ($5.3\pm$0.6) and artificial damaged ($4.3\pm$0.6). Managnese content in the leaves of chestnut grown in shade cloth-grown condition was higher than that in the leaves of chestnut that had been exposed to full sunlight condition and dark condition, and feeding damaged leaf.

  • PDF

Selection of Pollution-tolerant Plants and Restoration Planning to Recover the Forest Ecosystem Degraded by Air Pollution in the Industrial Complex

  • Lee, Chang-Seok;Moon, Jeong-Suk;Hwangbo, Jun-Kwon;You, Young-Han
    • Animal cells and systems
    • /
    • 제6권1호
    • /
    • pp.59-64
    • /
    • 2002
  • To restore the forest ecosystem severely damaged by air pollution around industrial complexes, plants tolerant to the polluted environment were selected by transplant and pot culture experiments. A restoration plan by arranging those tolerant species was prepared based on the ecological diagnostic results on an area that requires restoration. Transplant experiment in Ulsan and Yeocheon areas, the representative industrial complexes in Korea, selected eight tolerant species of Quercus aliena, Q. acutissima, Q. dentata, Q. mongolica, Q. serrata, Ligustrum japonicum, Styrax japonica, and Poncirus trifoliata. Cultivation in the polluted soil transported from the Ulsan and Yeocheon industrial complexes chose five tolerant plants of Q. aliena, Q. acutissima, Q. serrata, Styrax japonica, and Alnus firma. A plan to restore the forest ecosystem of Mt. Dotjil, which experienced the severest ecosystem degradation in the Ulsan industrial complex, was prepared by applying those tolerant species along with treatment for soil amelioration. Arrangement of the tolerant species was designed by considering their ecological characteristics including distribution range on topography and shade tolerance. Soil amelioration was focused on the improvement of fertility and moisture conditions.

Reactive Dyeing of Bio Pretreated Cotton Knitted Fabrics

  • Ayoub, Alvira;Ali, Iftikhar;Son, Eun Jong;Jeong, Sung Hoon
    • 한국염색가공학회지
    • /
    • 제26권4호
    • /
    • pp.283-289
    • /
    • 2014
  • This study describes the feasibility and optimization of reactive dyeing on bio treated cotton knitted fabrics. For this, cotton knitted fabrics distinctly with two different enzymes, alkaline Pectinases(Scourzyme $L^{(R)}$) and Pectate lyases(Bactosol Co. ip $liquor^{(R)}$). In this way by increasing the concentration and processing temperature, the access of enzymes towards the fatty and waxy substrate was found to be accelerated. To achieve higher absorbency and whiteness index, a series of experiments was carried out to assure that Pectate lyases enzymes possesses high access towards the fats and waxes at high temperature. To this end, cotton knitted fabrics was dyed without oxidative bleaching step. The Pectate lyases scoured and dyed fabrics showed less color difference when 2% dye shade is used. The fabrics pre-scoured with Pectate lyases showed good the light and washing fastness properties, compared to the conventional and Pectinases dyed fabrics. However pectinases enzymes showed lower activity at high temperature, caused poor wettability and whiteness index of fabrics. The improvement of the accessibility of enzyme to the pectin at higher temperature Pectate lyases treatment before dyeing was found to be useful for subsequent pectin degradation in cotton knitted fabrics.

분산염료/산성염료에 의한 PTT(polytrimethylene terephthalate)/견 교직물의 염색에 관한 연구 (A Study on the Dyeing of PTT(polytrimethylene terephthalate)/Silk Mixture Fabrics with Disperse Dyes/Acid Dyes)

  • 성우경
    • 한국의류산업학회지
    • /
    • 제12권1호
    • /
    • pp.94-102
    • /
    • 2010
  • The dyeing of poly(trimethylene terephthalate)(PTT)/silk mixture fabrics can be accomplished by a two bath dyeing method with separate application of the disperse dyes on the PTT, reduction cleaning of the stained silk and then dyeing the silk with the acid dyes, or by one bath dyeing method with mixed dye ranges, possibly followed by a cleaning treatment. The two bath dyeing method has the advantage of better results with respect to dry cleaning fastness properties thanks to the possibility of an intermediate reduction clear. On the other hand, as compared with the two bath dyeing method, one bath dyeing method with a mixed dye range permits rapid and more reproducible dyeing, without the risk of great difference with respect to the shade of the strike on both substrates as well as savings of time, energy and water usage. This study was carried out to investigate dyeing characteristics of PTT/silk mixture fabrics with disperse dyes/acid dyes by one bath dyeing method in comparison with two bath dyeing method in the interests for rationalization of the dyeing process.

Esthetic rehabilitation of single anterior edentulous space using fiber-reinforced composite

  • Kim, Hyeon;Song, Min-Ju;Shin, Su-Jung;Lee, Yoon;Park, Jeong-Won
    • Restorative Dentistry and Endodontics
    • /
    • 제39권3호
    • /
    • pp.220-225
    • /
    • 2014
  • A fiber-reinforced composite (FRC) fixed prosthesis is an innovative alternative to a traditional metal restoration, as it is a conservative treatment method. This case report demonstrates a detailed procedure for restoring a missing anterior tooth with an FRC. A 44-year-old woman visited our department with an avulsed tooth that had fallen out on the previous day and was completely dry. This tooth was replanted, but it failed after one year. A semi-direct technique was used to fabricate a FRC fixed partial prosthesis for its replacement. The FRC framework and the pontic were fabricated using a duplicated cast model and nanofilled composite resin. Later on, interproximal contact, tooth shape, and shade were adjusted at chairside. This technique not only enables the clinician to replace a missing tooth immediately after extraction for minimizing esthetic problems, but it also decreases both tooth reduction and cost.

염욕의 pH와 매염제의 변화에 따른 코치닐의 염색성 연구 II -양모직물을 중심으로- (A Study on Cochineal Dyeing by Various Mordants and pH Conditions II -Treatment on Wool Fabric-)

  • 김경선;김종준;전동원
    • 복식문화연구
    • /
    • 제13권2호
    • /
    • pp.248-254
    • /
    • 2005
  • In this study, wool fabric specimens were pre-mordanted using Sn, Al, Cu, Cr, and Fe, and subsequently dyed using cochineal, maintaining the pH of the dye bath constant using pH buffer solutions of 4, 5, 6, 7, and 8. In the case of wool fabric specimen, regardless of the type of mordanting agents, peak dye-uptake amount was obtained at the acidic region, pH 4, and above pH 6, the dye-uptake amount decreased remarkably. Differing from the cotton fabric case, the dyed wool fabric specimen exhibited red shade even in the case of non-mordanting, at the region of pH values of 4 and 5. It is presumed that in the acidic dye bath the effect of cationic amine group present in the structure of wool fiber molecules took place. The amount of color difference, among the mordanting agents, due to the increase of pH value, was highest for the Fe mordanting case. It seems, therefore, that the Fe mordanting is affected most by the pH value.

  • PDF