• Journal of Korean Society of Transportation
• /
• 제29권3호
• /
• pp.93-101
• /
• 2011

In 2008, Korea has observed total 215,822traffic accidents Although the number has decreased since then, the crash rate is still higher than those of other advanced countries. In particular, high rate of pedestrian accidents occurred on urban streets is recognized as a serious problem. The previous studies, however, are not entirely considerate of accident factors by accident type. Inspired by the fact, this study analyzes factors affecting traffic accident by accident type. Using the accident data collected on urban streets in Seodaemun-gu, this paper classifies the accidents into two groups (i.e., vehicle-vs-vehicle and vehicle-vs-person crashes), and analyzes relationships between severity and exogenous variables. For the analysis, Structural Equation Modeling (SEM) is employed to estimate relationships among exogenous factors of traffic accident by each type on urban streets. The resulting model reveals that roadway related factors are highly correlated with the severity of vehicle-vs-vehicle crashes whereas environment factors are with vehicle-vs-person crashes.

• Journal of Korean Society of Transportation
• /
• 제21권2호
• /
• pp.45-60
• /
• 2003

A median is a safety feature most commonly used to separate opposing traffic on a divided highway. In designing highways, the selection and installation of a median can be a critical part from a safety viewpoint because road crossing accidents are definitely more serious than other accidents. In regard to the important function of the median. the proper countermeasure ought to have been provided and thorough study should have been carried out. In this paper, traffic accident data are analyzed to examine the accident reduction effect of the median, which are gathered from all over 4-lane national roads in Korea. The traffic accident data were categorized into two groups by the existence of a median. For more effective analysis, the data have been classified by accident type, severity. and occurrence time. To compare the effectiveness of median installation, not only the accident frequency but also the accident severity, EPDO. and the occupancy rate of specific accidents have been used as a mode of effectiveness. The analysis of the effectiveness of medians shows that both the accident frequency and the accident severity could decrease by providing a median. Also the section where a median was supplied showed the improvement of overall safety through fewer serious and fatal crashes as well as fewer head-on crashes. Therefore, conclusions can be drawn from results of this study that the median installation is an important means to increase the safety of over 4-lane national roads. This study is expected to provide the reasonability of the median installation by identifying the reduction of traffic accident after the median installation and to play a major role in selecting sections where the median is to be offered.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제21권6호
• /
• pp.132-145
• /
• 2022

This study was based on the black box images of traffic accidents on highways, cluster analysis and prediction model comparisons were carried out. As analysis data, vehicle driving behavior and road surface conditions that can grasp road and traffic conditions just before the accident were used as explanatory variables. Considering that traffic accident data is affected by many factors, cluster analysis reflecting data heterogeneity is used. Each cluster classified by cluster analysis was divided based on the ratio of the severity level of the accident, and then an accident prediction evaluation was performed. As a result of applying the Logit model, the accident prediction model showed excellent predictive ability when classifying groups by cluster analysis and predicting them rather than analyzing the entire data. It is judged that it is more effective to predict accidents by reflecting the characteristics of accidents by group and the severity of accidents. In addition, it was found that a collision accident during stopping such as a secondary accident and a side collision accident during lane change act as important driving behavior variables.

• Safety and Health at Work
• /
• 제10권1호
• /
• pp.54-60
• /
• 2019

Background: Increasing the establishment of integrated management systems (IMSs) is done with the purpose of leaving traditional management methods and replacing them with modern management methods. Thus, the present study sought to analyze the events and investigate the impact of IMS on health and safety performance indices in an Iranian combined cycle power plants. Methods: This case study was conducted in 2012 in all units of the Yazd Combined Cycle Power Plant on accident victims before and after the implementation of IMS. For data analysis and prediction of indices after the implementation of IMS, descriptive statistics and Kolmogorov-Smirnov test, Chi-square, linear regression, and Cubic tests were conducted using SPSS software. Results: The number of people employed in the power plant in an 8-year period (2004-2011) was 1,189, and 287 cases of work-related accidents were recorded. The highest accident frequency rate and accident severity rate were in 2004 (32.65) and 2008 (209), respectively. Safe T-score reached to below -3 during 2010-2011. In addition, given the regression results, the relation between all predictor variables with outcomes was significant (p < 0.05), except for the variable $X^1$ belonging to the accident severity rate index. Conclusion: The implementation of safety programs especially that of IMS and its annual audits has had a significant impact on reducing accident indices and improving safety within the study period. Accordingly, health and safety management systems are appropriate tools for reducing accident rate, and the use of regression models and accident indices is also a suitable way for monitoring safety performance.

• Journal of the Korean Society of Safety
• /
• 제36권4호
• /
• pp.80-87
• /
• 2021

Risk assessment techniques are processes used to evaluate hazardous risk factors in construction sites, facilities, raw materials, machinery, and equipment, and to estimate the size of risk that could lead to injury or disease, and establish countermeasures. The most important thing in assessing risk is calculating the size of the risk. If the size of the risk cannot be calculated objectively and quantitatively, all members who participated in the evaluation would passively engage in establishing and implementing appropriate measures. Therefore, this study focused on predicting accidents that are expected to occur in the future based on past occupational accident statistics, and quantifying the size of the risk in an overview. The technique employed in this study differs from other risk assessment techniques in that the subjective elements of evaluators were excluded as much as possible by utilizing past occupational accident statistics. This study aims to calculate the size of the risk, regardless of evaluators, such as a manager, supervisor, safety manager, or employee. The size of the risk is the combination of the likelihood and severity of an accident. In this study, the likelihood of an accident was evaluated using the theory of Bud Accident Chainability, and the severity of an accident was calculated using the occupational accident statistics over the past five years according to the accident classification by the International Labor Organization.

• Journal of the Korea Safety Management & Science
• /
• 제12권3호
• /
• pp.13-19
• /
• 2010

Risk level for each construction work can be very important factors to establish advanced prevention measures. But it is important how to produce it. There are three different methods to set it up for construction situation. They are as follows; 1) occurrence frequency = the number of accident workers of each work kind / yearly accident workers 2) occurrence frequency = the number of accident workers of each work kind / yearly workers 3) occurrence frequency = the number of accident workers of each work kind / the total workers All these three concepts(=averaged concept)are analyzed. Additionally frequency based on discrete curve, and severity based on continuous curve are also combined for producing risk level with more scientific approach. This risk level can be very useful to make prevention plan or take measures at construction sites. This is study result can change existing risk level concept to new concept of it, namely rail way work and in-water work showed be high risk level and RC work be low risk level, different from the situation which we have thought commonly, so far.

• Proceedings of the Safety Management and Science Conference
• /
• 대한안전경영과학회 2010년도 춘계학술대회
• /
• pp.141-147
• /
• 2010

Risk level for each construction work can be very important factors to establish advanced preventionmeasures. But it is important how to produce it. There are three different methods to set it up for consturuction situation. They are as follows; 1) occurrence frequency = the number of accident workers of each work kind / yearly accident workers 2) occurrence frequency = the number of accident workers of each work kind / yearly workers 3) occurrence frequency = the number of accident workers of each work kind / the total workers All these three concepts(=averaged concept)are analyzed. Additionally frequency based on discrete curve, and severity based on continuous curve are also combined for producing risk level with more scientific approach. This risk level can be very useful to make prevention plan or take measures at construction sites. This is study result can change existing risk level concept to new concept of it, namely rail way work and in-water work showed be high risk level and RC work be low risk level, different from the situation which we have thought commonly, so far.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제20권4호
• /
• pp.1-12
• /
• 2021

Emergence of the COVID 19 pandemic has resulted in a sharp increase in the number of two-wheeler vehicular traffic accidents, prompting the introduction of numerous efforts for their prevention. This study applied XGBoost to determine the factors that affect severity of two-wheeled vehicular traffic accidents, by examining data collected over the past 10 years and analyzing the influence of each factor. Among the total factors assessed, variables affecting the severity of traffic accidents were overwhelmingly high in cases of signal violations, followed by the age group of drivers (60s or older), factors pertaining only to the car, and cases of centerline infringement. Based on the research results, a reasonable legal reform plan was proposed to prevent serious traffic accidents and strengthen safety management of two-wheeled vehicles. Based on the research results, we propose a reasonable legal reform plan to prevent serious traffic accidents and strengthen safety management of two-wheeled vehicles.

• The Journal of Korean Society for School & Community Health Education
• /
• 제14권2호
• /
• pp.47-57
• /
• 2013

Backgrounds: According to a high interest in health these days, a bicycle is being highlighted as a means of leisure activity and auxiliary transportation means. Along with an increase in this interest, there is tendency that even the width of bicycle utilization gets diverse and that bicycle accident is also rapidly growing. Purpose: The purpose of this study was to suggest a prevention measure available for reducing occurrence of bicycle accidents by analyzing the Epidemiological characteristics according to age and injury severity in bicycle-injured patients. Methods: This study analyzed 115 materials suitable for this study by examining a medical record of patients, who received the hospitalized treatment owing to bicycle accident from January 1, 2011 to December 31 at one general hospital in S city. Results: The male-and-female ratio of bicycle-injured patients stood at about 7:3. The average age was 38.14(${\pm}21.59$) years old. The largest injury happened in 40-59 years old(31.3%). The averagely hospitalized period was 17.33(${\pm}18.12$) days. Injury severity was the ratio of 2:8 in a mild case versus a serious case. As for drinking and smoking characteristics according to age, the injury occurred the most in between 40 and 59 years old for people with drinking and smoking and in under 19 years for people without drinking and smoking. According to injury severity, the ratio of serious case got higher in the higher age. This was indicated(${\chi}^2$=15.675, p=0.001) to be statistically significant. Conclusion: In this study, a bicycle accident was indicated to have high injury risk in young children, adolescents, and old-age group. Prevention measure and publicity are demanded for reducing injury occurrence such as the prevention education for bicycle accident and wearing protective gear focusing on the ages of corresponding to groups with risk of injury occurrence. In addition, the security of safe movement route is necessarily demanded in order to increase application level as an auxiliary transportation means.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제58권3호
• /
• pp.251-261
• /
• 2022

Tuna purse seine fishery (TPF) constitute more than 60% of distant water fishery production in Korea based on a statistic of 2018, and 28 ships from four different companies were under operation at the western and central Pacific Ocean. On this research, common risk factors during TPF were investigated via enumeration of five years Korean fisherman's insurance payment statement, followed by some counterplans to diminish the accident rate. The accident rate of TPF on the Pacific Ocean peaked by 43.0% in 2014 and constantly decreased to 23.0% until 2018, presenting an average of 33.6%. Meanwhile, the accident rate on the Indian Ocean reached the highest point 55.1% in 2014 and declined to 11.6% in 2016, having an average of 24.7%. The average accident rate of the Indian Ocean scored 8.9% lower than the rate of the Pacific Ocean, but no statistic significance was observed. Depending on the process of operation, 'casting or hauling of net' was the most frequent part that people received an injury (40.4%). When the accidents were classified by their types, 'falling down' was the most recurrent cause of the injuries (28.5%). At the point of severity, the worst injuries were induced by crush hazard. Considering aforementioned accident frequency and severity, all the factors on the accident type list were divided into three different groups including high risk, moderate risk, and common risk. This study is expected to contribute to the reduction of occupational accidents during the work of fishermen and establishment of a safety management system for distance water fishing vessels.