• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.370-374
• /
• 1999

The proposed algorithm used the Hybrid teaming rule in the input and hidden layer, and Back-Propagation teaming rule in the hidden and output layer. From the results of simulation of tracking control with one link manipulator as a plant, we verify the usefulness of the proposed control method to compare with common direct adaptive neural network control method; proposed hybrid teaming rule showed faster loaming time faster settling time than the direct adaptive neural network using Back-propagation algorithm. Usefulness of the proposed control method is that it is faster the learning time and settling time than common direct adaptive neural network control method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.13-23
• /
• 1984

The purpose of this paper is to develop a numerical model which can be used to compute the suspended load concentration of which the two-dimensional unsteady diffusion equation is able to be solved by the finite difference method using the implicit scheme. The pick-up rate formula from the bottom used in the open channel as a sink source term and the Coleman's empirical formula for the diffusion coefficient were taken, and especially the hindered settling velocity and the vertical velocity of flow due to the periodical tidal motion were taken into account, while the effects of the variables, such as the horizontal and vertical velocities of flow, tidal range, the settling velocity and hindered settling, on the suspened load concentrations have been discussed, comparing the results obtained from the different cases in the simulation conditions.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.1
• /
• pp.97-109
• /
• 2004

The disposal of stormwater is one of the major problems in urban water management. One method of reducing peak runoff rates and other detrimental impacts of stormwater is detention storage. Detention ponds as a water quality control alternatives have been investigated by a number of researchers. Recognizing multiple roles such as flood peak attenuation, pollution removal and aesthetic enhancement, the design and management of detentions ponds deserve more research. The purpose of this research is to establish design criteria wet detention ponds to improve water quality. Water quality in detention pond discharge might be improve with physical, chemical and biological alterations. Physical alteration was focused in this study. There are several methods for estimating the suspended solid control capability of wet detention ponds. Existing models of suspended solids removal are based on sedimentation and gravity settling theory. The pollutant trap efficiency of pond is a function of several interrelating factors. Detention time is the most important factor, because it determine gravity settling quantities of pollutants. Desirable modification of physical factors for improvement of water quality in wet detention ponds are volume ratio, area ratio, length to width ratio, depth, out let location, bottom soil type. In order to apply design procedure in actual site, Namak new town development area was selected.

• Journal of Arbitration Studies
• /
• v.23 no.1
• /
• pp.85-105
• /
• 2013

The entertainment industry has developed along with current Korean wave fever, and so entertainment-related disputes are increasing rapidly. Litigation is a poor fit for entertainment disputes because of characteristics such as temporal sensitivity. Thus, in the US, the entertainment industry resolves these disputes through ADR mechanisms like arbitration, but cases of settling such disputes through arbitrations are very rare in Korea. This study examined the characteristics and types of entertainment disputes and considered the compatibility of arbitration as a method for settling disputes, and then suggested tasks for revitalizing arbitration systems as entertainment dispute resolution procedures. Arbitrations have many merits, such as the rapid pace of procedures, confidentiality, satisfying the long-term desires of business relationships, the low cost of settling disputes, judgments rendered by experts, etc.; thus, it is a very suitable mechanism to settle entertainment-related disputes. The study proposes necessary steps for revitalizing arbitration systems for entertainment disputes. First, awareness of entertainment industry workers about the arbitration system should be raised. Second, special educational programs for members the of Korean Commercial Arbitration Board related to entertainment should be set up and operated together with encouraging positive attitudes toward actions like establishing a dedicated arbitration unit on entertainment disputes. Third, neutral, professional arbitrators should be secured and aggressive disclosures made. Fourth, a professional ADR organization such as an "Entertainment Arbitration Committee" should be established.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.398-405
• /
• 2016

The cellulose nanofibers (CNFs) were prepared by wet disk-milling (WDM) and fractionated by settling method into supernatant, middle and sediment fractions. The diameter and its distribution of the fractionated CNFs were investigated. With increasing WDM passing number, precipitation became delayed. Weight fraction at sediment fraction was decreased, whereas those at supernatant and middle fractions were increased with increasing WDM passing number. Diameter distribution of CNFs at supernatant fraction was narrowest and became broaden at middle and sediment fraction. Filtration time was longer in order of supernatant, middle and sediment fraction.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.172-172
• /
• 2000

In this paper, we propose a new discrete-time sliding mode controller for reference tracking. Stability of tracking error is analyzed. Design method of sliding surface for tracking control is proposed. Simulation and experimental results are included to show the effectiveness of the proposed method.

• Imaging Science in Dentistry
• /
• v.32 no.3
• /
• pp.159-165
• /
• 2002

Purpose: The aim of this study was to introduce a method of obtaining the oscillation graphs of the dental x-ray tube heads relative to time using an accelerometer. Materials and Methods: An Accelerometer, Piezotron type 8704B25 (Kistler Instrument Co., Amherst, NY, USA) was utilized to measure the horizontal oscillation of the x-ray tube head immediately after positioning the tube head for an intraoral radiograph. The signal from the sensor was transferred to a dynamic signal analyzer, which displayed the magnitude of the acceleration on the Y-axis and time lapse on the X -axis. The horizontal oscillation of the tube head was measured relative to time, and the settling time was also determined on the basis of the acceleration graphs for 6 wall type, 5 floor-fixed type, and 4 mobile type dental x-ray machines. Results : The oscillation graphs showed that tube head movement decreased rapidly over time. The settling time varied with x-ray machine types. Wall-type x-ray machines had a settling time of up to 6 seconds, 5 seconds for fixed floor-types, and 1 I seconds for the mobile-types. Conclusion: Using an accelerometer, we obtained the oscillation graphs of the dental x-ray tube head relative to time. The oscillation graph with time can guide the operator to decide upon the optimum exposure moment after x-ray tube head positioning for better radiographic resolution.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.59-63
• /
• 2011

Friction damping is one of the attractive vibration control technique for space structures due to its simplicity and large damping capacity. However, passive approaches for friction damping have a limitation because energy is no longer dissipated at sticking. In order to overcome this problem, semi-active control methods to adjust normal force at frictional interface have been studied in previous researches. In this paper, two semi-active friction control method is compared by simulating SDOF model of truss structure. The first approach is on-off control to maximize rate of energy dissipation, whereas the second concept is variable friction force control to minimize amplitude ratio for each half period. The maximum friction force, control variable in on-off control method, is obtained to minimize 1% settling time, and is different from optimal friction force in passive control. Simulation results show that performance of on-off control is better than that of variable friction force control in terms of settling time and controlled friction force.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.105-113
• /
• 1968

The following experiments were carried out at rock method oyster field at Uduri, Dolsan-myon, Yeocheon-gun, Jeon-nam, Korea, in 1966. In this experiment, the settling rate of oyster at each exposure level and their growth rate were checked. 1. The settling rate of oyster spats was highest at 4 hour exposure level in the day-time during spring tide, and the growth rate became greater the lower stratum until 3 hours and 30 minutes exposure level. 2. Rocks applied at the place higher than 5 to 6 hour exposure level which amount 26 percents of applied rocks, were not utilized properly because the settling rate of spats and their growth rate were very bad. 3. For the future application of rocks for oyster culture, effort should be paid to instruct the oyster farmers to apply all rocks at proper exposure Ie el with bottom leveling and the rocks should be spaced properly for better barvest.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.952-958
• /
• 1999

This paper presented the application of GAs as a means of finding optimal solutions over a parameter space in the controller design for a fuzzy control system. The performance can involve a weighted combination of various performance characteristics such as rise-time, settling-time, settling-time, overshoot. The results obtained here are compared with those for a traditional design obtained using the root-locus method. In contrast to traditional methods, the GA-based method does not require the usual mathematical processess or mathematical model of the system. In this paper, the Ga-based Fuzzy control system combining Fuzzy control theory with the GA, that is known to be very effective in the optimization problem, will be proposed The effectiveness of the proposed control system will be demonstrated by computer simulations using task tracking position system in stable and unstable linear systems. It is shown that the GA-based controller is better than the traditional controller used It stable and unstable linear systems.