• Journal of Sensor Science and Technology
• /
• v.26 no.2
• /
• pp.141-147
• /
• 2017

A pressure sensor in pulse measurement system is a core component for precisely measuring the pulse waveform of radial artery. A pulse sensor signal that measures the pulse wave in contact with the skin is affected by the temperature difference between the ambient temperature and skin surface. In this study, we found experimentally that the signal changes of the pressure sensors and a temperature sensor were caused by the temperature of the wrist surface while the pressure sensor was contacted on the skin surface for measuring pulse wave. To observe the signal change of the pulse sensor caused by temperature increase on sensor surface, Peltier device that can be kept at a set temperature was used. As the temperature of Peltier device was kept at $35^{\circ}C$ (the maximum wrist temperature), the device was put on the pulse sensor surface. The temperature and pressure signals were obtained simultaneously from a temperature sensor and six pressure sensors embedded in the pulse sensor. As a result of signal analysis, the sensor pressure was decreased during temperature increase of pulse sensor surface. In addition, the signal difference ratio of pressure and temperature sensors with respect to thickness of cover layer in pulse sensor was increased exponentially. Therefore, the signal of pressure sensor was modified by the compensation equation derived by the temperature sensor signal. We suggested that the thickness of cover layer in pulse sensor should be designed considering the skin surface temperature.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.2
• /
• pp.115-125
• /
• 2013

In this research, a habitat model for Chinemys reevesii is suggested based on the components and variables of the Habitat Suitability Index which was determined through a series of literature researches, site surveys, and behavioral analysis. After reviewing the general habitat requirements, the site surveys(9 reservoirs) from July to December 2010, and the behavioral analysis of five Chinemys reevesii, the relationship between the behavioral and habitat use pattern was evaluated. According to the site surveys and behavioral analysis, the ecological core area(FK 50%) was about 0.96ha on average, the influence area(FK 90%) 4.22ha, and the home range was about $37.75{\pm}17.26m$ on average. As for the habitat use pattern of Chinemys reevesii, it travels through canals, and is influenced by the surrounding land uses. Also when there is a lack of food, the home range increases, and during hibernation, Chinemys reevesii prefers to be in an area within 1~2m range of water shores of fine textured soil and aquatic plants. After analyzing the information, the HSI standard was set and its components were determined as food, sunbathing and cover, aquatic environment, and spatial relationships. And the variables and the ranges of the components was determined as aquatic plant cover(0~49.81%), sandy area($3{\sim}13m^2$) and water velocity(0~60cm/s) etc. Lastly, plans and sections of the habitat model is provided designed according to the information from the researches, and problems to consider during habitat restoration was suggested in order to help understand about Chinemys reevesii habitat.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.85-93
• /
• 2018

This study investigated the structural behavior and field applicability of sandwich type GFRP arches with polymer mortar in core. As a result, in case of crack loading and failure loading, total strains at crown were the highest; the fracture strain at crown was 0.01690, which is 4.2 times greater than the fracture strain (0.004) of cement concrete. The 3 % deflection load was 17.42 kN, the flexural strength was $163.98{\times}10^{-3}GPa$, and the flexural elastic modulus was 11.884 GPa. From load-deflection relationship up to 3.5 % deflection, 3D analysis results and experimental values were observed to be almost identical. It was considered reasonable to set a deflection rate limit to be 3 % for structural safety purpose. The standard external flexural strength of semicircular arch used in this study was approximately 2.64 times higher than that of hume pipe (2 type standard) and tripled composite pipe. The external pressure strength at fracture was approximately 1.57 times higher than that of hume pipe. It was confirmed that the implementing semicircular arch had mechanically more advantage than the circular pipe. Optimum member thickness was 8~53 mm according to arch radius of 450~1,800 mm and cover depth of 2~10 m. It was found that the larger strength could be obtained even if the thickness of member was smaller than that of concrete structure. In field application study, figures and equations were derived for obtaining applicable cover depth and optimum member thickness according to loading conditions. These would be useful data for design and manufacture of sandwich type semicircular arch.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.11
• /
• pp.957-964
• /
• 2016

This paper presents numerical investigation on behaviors of the rear cover in the vertical launcher under rocket plume loading by using fluid-structure interaction analysis. The rocket plume loading is modeled by the fully Eulerian method and elasto-plastic behavior of the rear cover is predicted by the total Lagrangian method based on a 9-node planar element. The interface motion and boundary conditions are described by a hybrid particle level-set method within the ghost fluid framework. The present results will be compared with the experimental data in the future.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.3
• /
• pp.151-159
• /
• 2018

BACKGROUND: In this review paper, the effects of surface cover (SCV), vegetative filter strip (VFS), and vegetated ridge (VRD) on the pollutant runoff from steep-sloping uplands were analyzed to compare the pollutant reduction efficiency in runoff ($PRE_{runoff}$) of the practices and to investigate how slope and rainfall parameters affect the $PRE_{runoff}$. METHODS AND RESULTS: The $PRE_{runoff}$ of SCV, VFS, and VRD for pollutants including suspended solids and biological oxygen demand was compared by analysis of variance. The effect of slope and rainfall parameters on the $PRE_{runoff}$ was explored by either mean comparison or regression analysis. It was found that the $PRE_{runoff}$ differs with the practices due to different pollutant reduction mechanisms of the practices. Though the $PRE_{runoff}$ was likely to be affected by site condition such as slope and rainfall (amount and intensity), more comprehensive understanding was not possible due to the limited data set. CONCLUSION: The $PRE_{runoff}$ of SCV, VFS, and VRD differed due to the distinctive mechanisms of pollutant removal of the practices. It is necessary to accumulate experimental data across a variety of gradient of slope and rainfall for comprehensive understanding of the effects of the practices on pollutant runoff from steep-sloping uplands.

• Fashion & Textile Research Journal
• /
• v.24 no.1
• /
• pp.127-137
• /
• 2022

Recently, various clothing items are being developed using 3D printing technology, but comfort has become an issue while wearing them for a long time. Therefore, this study researched on how the temperature and humidity of the devices developed by 3D printing change depending on the material combination. Five types of material combinations (EVA foam, TPU density 10%, TPU density 30%, EVA foam+TPU density 10%, and EVA foam+TPU density 30%) were selected as variables, and the experiment was conducted for two different cases with and without a cover. All the ten types of samples were placed on the hot plate set at 36℃, and the surface temperature and humidity were measured at three different points for 10 minutes. As a result, the case with only TPU showed the greatest temperature change while the case with 100% EVA foam showed the least temperature change. The humidity of the surface layer gradually decreased with time for 100% EVA foam. For the case with TPU materials, the moisture was transferred to the surface layer at first, thereby increasing the humidity but then dropped significantly. Meanwhile, the cases with the cover on showed similar tendencies of change in both temperature and humidity where the overall temperature and humidity delivery were slow.

• Journal of the Korea Convergence Society
• /
• v.12 no.11
• /
• pp.275-284
• /
• 2021

This study analyzes the characteristics regarding the image of women in feminist magazine covers. Along with fundamental analysis of the female image that appeared on the covers of feminist magazines and the grammar of visual design by Kress and van Leeuwen, a methodology of socio semiotic research, this study explores the structure and driving principles of symbols that have organized female images. The subject of analysis is set to 200 covers of magazines published from the 1960s to the 2010s. Through analysis, first, female images represented in the covers of feminist magazines showed women of various races, age groups, appearances, and occupations, and the degree od emphasis on the physique was fewer and natural-looking. Second, the study confirms that feminist magazines actively utilize representational and interactive metafunctions to deliver symbolic information such as messages of confidence, strength, and courage. Third, the organized symbols affected the recipient's understanding and interpretation of images. I hope this study helps to contemplate ways to express female images and the dynamic and diverse aspects of women.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.477-487
• /
• 2010

In North Korea, forests were intensively degraded by forest land reclamation for food production and firewood collection since the mid-1970s. These degraded forests have to be certainly recovered for economic support, environmental protection and disaster prevention. In order to provide detailed land cover information of forest recovery project (A/R CDM), this study was focused to develop an improved classification method for degraded forest using 2.5m SPOT-5 pan-sharpened image. The degraded forest of North Korea shows various different types of texture. This study used GLCM texture bands of segmented image with spectral bands during forest cover classification. When scale factor 40/shape factor 0.3 was used as a parameter set to generate segment image, segment image was generated on suitable segment scale that could classify types of degraded forest. Forest land cover types were classified with an optimum band combination of Band1, Band2, band3, GLCM dissimilarity (band2), GLCM homogeneity (band2) and GLCM standard deviation (band3). Segment-based classification method using spectral bands and texture bands reached an 80.4% overall accuracy, but the method using only spectral bands yielded an 70.3% overall accuracy. As using spectral and texture bands, a classification accuracy of stocked forest and unstocked forest showed an increase of 23~25%. In this research, SPOT-5 pan-sharpened high-resolution satellite image could provide a very useful information for classifying the forest cover of North Korea in which field data collection was not available for ground truth data and verification directly. And segment-based classification method using texture information improved classification accuracy of degraded forest.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.57-65
• /
• 2010

In this paper, we present a universal steganalysis scheme. The proposed method extract features of two types. First feature set is extracted from histogram characteristic of the wavelet subbands. Second feature set is determined by statistical moments of wavelet characteristic functions. 3-level wavelet decomposition is performed for stego image and cover image using the Haar wavelet basis. We extract one features from 9 high frequency subbands of 12 subbands. The number of second features is 39. We use total 48 features for steganalysis. Multi layer perceptron(MLP) is applied as classifier to distinguish between cover images and stego images. To evaluate the proposed steganalysis method, we use the CorelDraw image database. We test the performance of our proposed steganalysis method over LSB method, spread spectrum data hiding method, blind spread spectrum data hiding method and F5 data hiding method. The proposed method outperforms the previous methods in sensitivity, specificity, error rate and area under ROC curve, etc.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2303-2315
• /
• 2013

In general, the waterway was installed for drain water from steep slope and waterway cover was set up to prevent overflow and water separation at berm of waterway. In this study, hydraulic experiment was conducted to analyze the flow characteristics and enact standard design criteria of the waterway. Hydraulic experimental apparatus which can change the slope of waterway and the length of berm were installed to analyze of flow characteristics at the waterway. The slopes of waterway were $40^{\circ}$, $50^{\circ}$, $60^{\circ}$, and $70^{\circ}$ and the range of discharge were 1.0~5.6 ${\ell}/s$. The flow in berm was distinguished two types such as hydraulic jump and splash flow. These kinds of flows depended on the rates of discharge in waterway. When inlet discharge was below 1.1~2.0 ${\ell}/s$, the separation phenomenon of water was generated at upper and lower portion in berm by the splash flow. The scattering range of water particles and length of water separation was measured depending on the slope of waterway. The start point of scattering was about 20 cm(1.3B) from the place connected upper waterway with brem and the length of water separation was till 210 cm(3.5B) from the place connected lower waterway with brem. Therefore, the waterway cover needed to install from starting of berm to 1B and from the lower part of berm to 3.5B.