• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.455-459
• /
• 1994

One relay control implementation to the servo control systepm is contrlved mainly for the high power electric or electro hydraulic type drive system. Proposed SERME control is relay emulated software scheme accounting a reay producing maximum torque in both direction in the insufficient bandwidth control system. Possibillty is proposed mathematically prlor to emperical work out.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.321-325
• /
• 2001

Servo drives with microcomputer control provide the possibility of using modem and sophisticated control algorithms. As an additional feature it is possible to implement parallel and/or redundant software and hardware structures to realise safe motion or similar security functions. Unfortunately microcomputer control also has some impact on the behaviour of servo drives. Control algorithm, cycle time, sensors and interface have to be perfectly synchronised. Special control schemes are necessary on the line side (power supply) to meet the actual requirements concerning EMC. This contribution presents experiences and results obtained from a modem digital drive system pointing out the influences of low and high accuracy position sensors and the interdependencies mentioned above.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.389-392
• /
• 2003

A use of micro processor having H-com functions is gradually increased, and this paper describes the digital servo controller applied to linear pulse motor The TMS320LF2407, made by TI(Texas Instruments Co.), is used as a arithmetic unit in control circuit, designed f3r motor drive and available for the implement of high performance and miniaturization. Also, it can allow the sufficient debugging and downloading into control board for independent operation. A current control in order to carry out a position control is of a digital current control mode, and its implement confirmed the servo control performance of position control.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.170-173
• /
• 2005

This paper presents an Fuzzy-Neuro Observer system for an ac servo motor dirve to track periodic commands using a neuro-fuzzy observer. AC servo motor drive system is rather similar to a linear system. However, the uncertainties, such as machanical parametric variation, external disturbance, uncertainty due to nonideal in transient state. therefore an intelligent control system that isan on-line trained neural network controller with adaptive learning rates.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.245-247
• /
• 1992

We utilize as a processor TMS320C25 (Texas Instrument) in making a driver for a 4 pole PM synchronous servo motor. TMS320C25 has a 32bit ALU and a 16 bit hardware multiplier, and the maximum instruction execution rate is 10MIPS at 40MHz. We adopted a space vector modulation PWM method. An interesting point of this work is that PWM wave is generated by utilizing timer interrupts. Hence, in the rest of time the processor can take care of the other routine such as Park's coordinate transformation and the computation required in the feedback loops. Thus, it mates the hardware circuit very simple. Due to the decrease in the number of components, the motor drive system becomes more fault-tolerant and cost-optimized. Also, more flexibility is gained in changing the control parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.88.6-88
• /
• 2002

In this study, the pneumatic servo valve was developed, and the study results could be summarized as follows; 1. A servo solenoid was designed, and its electromagnetic field was interpreted and the system's transient response was identified by using a commercial analysis program. 2. A program for analysis the flow in the spool was developed, and a study was conducted on the flow rate of the nozzle depending upon the pressure ratio between the upstream pressure and the downstream pressure, when the valve is fully opened in the spool and the flow force depending upon a displacement of the spool in the valve. 3. A PWM analog controller was designed and manufactured in...

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.137-139
• /
• 2007

In optical disk drives, a conventional control method in the presence of surface defect is holding the previous tracking control command. It is known that the method has a long settling time. This paper proposes a new control method which reduces the settling time. An optical head generally has coupled dynamics between focusing and tracking servo system. We present how to compensate the coupled dynamics so that reduced settling time is achieved. It is verified by experiments that the proposed method brings an improved performance in the presence of surface defect as well as in the normal operating condition.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.544-547
• /
• 2003

The purpose of this paper is to develop the straightforward design guidelines of PD/PID speed controller for Industry servo drives with plug and play concept. The controller gains are uniquely determined from the current control loop dynamics, speed loop delay, and mechanical parameters. In order to eliminate the mechanical friction uncertainties, an automatic PD/PI control mode switching algorithm Is introduced using online spectrum analysis of motor torque command. The dynamic performance of the proposed scheme assures a fast tracking response curve with minimal oscillation and settling time over the whole operating conditions. For comprehensive comparison of conventional PI control scheme, extensive test is carried out on actual servo system.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.352-356
• /
• 1998

This paper is a study about Ac servo motor position and speed control characteristics which depend on feedforward control, the acceleration / deceleration time constant after the interpolation, and PI control, automatic deceleration at corner in order to shape cutting control of feed drive system of the machine tool. The shape error caused by delay of the servo system in the direction of radius at the time of circular cutting is reduced by feedforward control. The shape error generated by the position command delay is minimized by using the acceleration / deceleration time constant after the interpolation. The results were verified to optical machining center experimentation of the machine tool.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.287-289
• /
• 1994

The ac servo system using an induction motor is so strong and inexpensive that it is most suitable for today's drive systems. For controlled ac motor drives, but slip frequency vector control system have been put to practical use, it is difficult to perform control of wide range, the same as de motor. A study is presented on an adaptive current control scheme for induction type ac servo motor drives using PWM inverter. An analysis of the control scheme in operations is given and the characteristics are studied by simulation. The implementation of the control scheme using a microprocessor-based system is considered.