• Ocean Science Journal
• /
• 제42권3호
• /
• pp.153-163
• /
• 2007

This study is based on a series of numerical modeling experiments to understand the tidal circulation in the Kangjin Bay (KB). The tidal circulation in the KB is mostly controlled by the inflow from two channels, Noryang and Daebang which introduce the open ocean water into the northern part of the KB with relatively strong tidal current, while in the southern part of the KB, shallowest region of the entire study area, weak tidal current prevails. The model prediction of the sea level agrees with observed records at skill scores exceeding 90 % in terms of the four major tidal constituents (M2, S2, K1, O1). However, the skill scores for the tidal current show relatively lower values of 87, 99, 59, 23 for the semi-major axes of the constituents, respectively. The tidal ellipse parameters in the KB are such that the semi-major axes of the ellipse for M2 range from 1.7 to 38.5 cm/s and those for S2 range from 0.5 to 14.4 cm/s. The orientations of the major-axes show parallel with the local isobath. The eccentricity values at various grid points of ellipses for M2 and S2 are very low with 0.2 and 0.06 on the average, respectively illustrating that the tidal current in the KB is strongly rectilinear. The magnitude of the tidal residual current speed in the KB is on the order of a few cm/s and its distribution pattern is very complex. One of the most prominent features is found to be the counter-clockwise eddy recirculation cell at the mouth of the Daebang Channel.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.95-104
• /
• 2005

Statement of problem. Higher stresses at the cervical bone around dental implants have been seen as a primary cause of the bone resorption at the site. Purpose : To determine the possibility of stress reduction by assembly of different abutment and implant in diameters. Material and methods. Abutments of several different diameters assembled on the top of XiVE$^{(R)}$ implants were axisymmetrically modeled for a series of finite element analyses. Abutments of 3.4, 3.8, 4.5, and 5.5 mm diameters were assumed to be sit on implants of the same or bigger diameters. All the abutments with an exception of 3.4mm dia, are technically possible to be assembled on bigger implants. Main consideration was given to the stresses at the cervical cortical bone induced by loads of parallel to the implant axis. Results and conclusions. 1. Higher stresses were observed at the cervical area of all the models of the same diameters of abutment and future. The peak stresses, which were shown to be a function of the fixture diameter, were from 1-1.85MPa. 2. Difference in the diameters of the abutments and the implants actually reduced the cervical bone stresses. 3. Downsizing of the abutment by one step resulted in 0.1MPa (5%) reduction of the stresses. In light of the relatively lower bone stress, however, this amount of stress reduction was decided to be biomechanically insignificant.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.69-74
• /
• 2015

Recently, energy harvesting technology is increasing due to the fossil fuel shortages. Energy harvesting is generating electrical energy from wasted energies as sunlight, wind, waves, pressure, and vibration etc. Energy harvesting is one of the alternatives of fossil fuel. One of the energy harvesting technologies, the piezoelectric energy harvesting has been actively studied. Piezoelectric generating uses a positive piezoelectric effect which produces electrical energy when mechanical vibration is applied to the piezoelectric device. Piezoelectric energy harvesting has an advantage in that it is relatively not affected by weather, area and place. Also, stable and sustainable energy generation is possible. However, the output power is relatively low, so in this paper, newly designed honeycomb shaped piezoelectric energy harvesting device for increasing a generating efficiency. The output characteristics of the piezoelectric harvesting device were analyzed according to the change of parameters by using the finite element method analysis program. One model which has high output voltage was selected and a prototype of the honeycomb shaped piezoelectric harvesting device was fabricated. Experimental results from the fabricated device were compared to the analyzed results. After the AC-DC converting, the power of one honeycomb shaped piezoelectric energy harvesting device was measured 2.3[mW] at road resistance 5.1[$K{\Omega}$]. And output power was increased the number of harvesting device when piezoelectric energy harvesting device were connected in series and parallel.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.269-274
• /
• 2011

A solar cell is primary parts to produce electrical energy from the Sun. And, we can utilize those solar cells as a power generation system in home, factory, and so on. In order to make proper power, the solar cells are configured in series and parallel lay down. In condition of uniform illumination, the solar array will produce an enough power by photovoltaic effects from the solar cells. In case of non-uniform illumination on the solar cells, the power will be dramatically decreased compared to design. Fortunately, there were so many research outputs regarding the illumination effects on solar array. In this work, we tried to find out the non-uniform effects on unit CPV solar cell, because there were no research outputs for unit CPV solar cell considering illumination. The CPV solar cell was used in CPV system to make a power by the Sun. We chosen the triple junction solar cell of GaAsInP2Ge for simulation, which has a 30 % of conversion efficiency. By simulation, we obtained the output performance of CPV solar cells in condition of various illumination by using Hamming Window function. Its performance was degraded by 10 % to 50 % depending illumination conditions.

• 디지털융복합연구
• /
• 제12권11호
• /
• pp.365-372
• /
• 2014

본 논문에서는 스마트미터를 활용한 건축물의 전력에너지 절감 및 효율화 방안에 대하여 실험하였다. 전력에너지 절감을 위해 개선된 자동역률제어시스템(APFC)을 제안하고, 수요전력의 억제(Demand Control) 방안을 제시하였다. 이는 스마트미터의 ICT 기술을 통하여 실시간 양방향으로 콘덴서 뱅킹과 차단기를 직접 제어함으로써 이루어진다. 개선된 APFC는 콘덴서 뱅킹을 보다 다양화하기 위해 이종 용량의 콘덴서를 직병렬 혼합 결선하여 구성함으로써 구축 비용을 최소화 한다. 상기 기능을 위해 Atmel사의 AVR465를 이용하여 PLC 및 Zigbee 통신기능을 갖는 스마트미터를 설계하였다. 24시간 운영되는 숙박시설에 대하여 테스트한 결과 역률은 95%이상을 유지하였고, 과보상은 발생하지 않았음을 확인할 수 있었다.

• 대한한의학원전학회지
• /
• 제23권2호
• /
• pp.89-105
• /
• 2010

Research methodology on Traditional Medicine in East Asia refers to logical thinking system, empirical positivism system and methodology of developing these knowledge systems. Logical thinking system of abstract concepts such as analogy or abduction and positivism system of reasonable explanation such as the five elements and their characteristic theory have been used in various ways empirically or in the form of humanities and knowledge system was developed through parallel structure of empirical positivism and exegetical studies. After the 16th century, evidence was required along with the tradition of putting emphasis on rationality, logicality and empirical positivism and characteristics of medical humanities can be found in emphasizing on medical ethics. Data that can be considered as structural review paper or meta analysis from original data of research on Traditional East Asian Medicine should be evaluated as historical evidence which is equivalent to specialist opinion, descriptive disease research, single case report or case series. Historical evidence based medicine is a research method using Historical evidence to selectively support data that are faithful to traditional theory with higher possibility to be used in future traditional east Asian medicine that links between traditional knowledge and scientific research methodology. Moreover, historical evidence based medicine tries to re-evaluate the value of traditional knowledge and ultimately, guides the direction of development of traditional medicine through scientific rationality based on history and culture.

• 한국ITS학회 논문지
• /
• 제14권6호
• /
• pp.117-124
• /
• 2015

본 논문에서는 새로운 기법의 광대역 저손실 CRLH(composit right/left handed) 전송선로와 윌킨슨 전력 분배기에 대해 제안한다. 전송선로는 평형 미엔더 인덕터와 직렬 캐패시터로 구성된 coplanar 도파관 (CPW)으로 구성되며, 전력 분배기는 CRLH 전송선로를 일반 전송선로 부분에 대체하여 설계를 한다. 실험 결과 동작 주파수 대역 8.4 GHz 에서 30.0 GHz내에서 반사손실은 12 dB 이하로써 비교적 만족한 결과를 얻었다. 전력 분배기의 주파수는 12.05에서 13.15 GHz 그리고 16.50에서 19.30 GHz 로써 대역폭은 20 dB 기준으로 8.9 % 및 17.9 % 이며 이는 측정결과와 시뮬레이션 결과와 비교를 하였을 때 상당히 일치하는 것을 알 수 있다.

• 대한조선학회지
• /
• 제27권4호
• /
• pp.27-31
• /
• 1990

양력면(揚力面)의 양력계산(揚力計算)에 흔히 쓰이고 있는 방법(方法)을 크게 나누면 Vortex Lattice 법(法)과 Mode Function법(法)이 있다. 잘 알려진 것 처럼, Vortex Lattice법(法)은 해(解)의 수렴성(收斂性)은 좋으나 계산시간(計算時間)이 많이 걸리는 문제점(問題點)이 있고, Mode Function법(法)은 계산시간(計算時間)은 짧으나 해(解)가 특이(特異)해 지는 경우가 있다. 그러므로 본(本) 논문(論文)에서는 양방법(兩方法)의 장점(長點)들을 살리도록, 양력면(揚力面)을 Span 방향(方向)으로 분할(分割)하고 각(各) Strip Mode Function을 사용하여 Vortex를 분포(分布)시켜, 양력면이론(揚力面理論)으로 양력(揚力)을 계산(計算)하였다. 우선 Horn Type의 반균형타(半均衡舵)에 본(本) 계산법(計算法)을 적용(適用)하여 타직압력(舵直壓力)을 계산(計算)하고 타(舵) 단독시험(單獨試驗)을 병행(竝行)하여 계산법(計算法)의 유용성(有用性)을 검증(檢證)하였다. 그 결과(結果), Stall과 같은 비선형적(非線形的) 유체현상(流體現象)이 일어나지 않는 한(限), 본(本) 계산법(計算法)은 유용(有用)하다는 결론(結論)을 얻었다. 끝으로, 본(本) 계산법(計算法)을 평행(平行)하게 늘어선 한척(隻)의 장방형타(長方形舵)에 적용(適用)하여 두 타(舵) 사이의 상호간섭(相互干涉)도 계산(計算)하였다.

• 한국전자파학회논문지
• /
• 제17권4호
• /
• pp.317-323
• /
• 2006

기존의 Wheeler cap 방법은 안테나의 등가회로가 간단한 직렬 또는 병렬 RLC 회로로 나타날 경우 동작 주파수 부근에서 안테나의 효율을 정확하게 계산할 수 있지만, 안테나의 등가회로가 복잡한 형태로 나타날 경우에는 적용할 수 없는 단점을 가지고 있다. 본 논문에서는 기존 Wheeler cap 효율 측정 방법의 적용 조건과 그로 인하여 발생되는 문제점을 살펴보고, 고차회로를 기반으로 개선된 Wheeler cap 효율 측정방법을 제안하였다. 제안된 방법은 안테나의 동작원리가 복잡하더라도 넓은 주파수 범위에서 비교적 정확하게 안테나의 효율을 계산할 수 있다. 복잡한 손실구조를 가지는 몇 가지 안테나들의 효율을 개선된 방식을 이용하여 측정하고, 시뮬레이션 결과와 비교 검토하여 제안된 방법을 검증하였다.

• 천문학회보
• /
• 제41권1호
• /
• pp.70.3-70.3
• /
• 2016

Active galactic nuclei (AGNs) typically show a non-thermal continuum locally represented by a power-law and many prominent emission lines in the UV and optical regions. AGNs are classified by two types, where Type I AGNs exhibit both broad and narrow lines and only narrow lines are observed in Type 2 AGNs. The unification models of AGNs invoke the existence of a molecular torus just outside of the broad line region. In the presence of a high column HI region associated with the molecular torus, we propose that significant fraction of broad line photons near Lyman series can be scattered by atomic hydrogen in the torus. In particular, $Ly{\alpha}$ being the strongest emission line, strong linear polarization may develop around $Ly{\alpha}$ through Rayleigh scattering. We adopt a Monte Carlo technique to investigate the polarized transfer of $Ly{\alpha}$ in a thick HI region with the shape of a torus. We consider the range of HI column density N_HI = 1020-23 with fixed geometric parameters of the torus such as the inner and outer radii and the height. We present the polarized spectra and angular distribution of Rayleigh scattered radiation around $Ly{\alpha}$. We find that the $Ly{\alpha}$ core part is polarized in the direction perpendicular to the symmetry axis whereas in the far wing part it is polarized in the parallel direction. It is concluded that the unification of AGNs implies that $Ly{\alpha}$ can be uniquely polarized through Rayleigh scattering.