• Journal of Magnetics
• /
• 제2권4호
• /
• pp.138-142
• /
• 1997

The magnetic and magneto-optical properties of Ni/Pt multilayers exhibiting square Kerr hysterisis loops at room temperature were studied. Squared polar Kerr hysterisis loops at room temperature in Ni/Pt multilayer thin films were obtained for the samples prepared by sequential dc magnetron sputter deposition of nickel and platinum with tNi=13-21$\AA$ and tPt=3.5-7.5$\AA$. The coercivity of these multilayers was in the range of 400-1100 Oe. The saturation magnetization was found to show an inverse dependence on nickel sublyaer thickness. About a monolayer of Ni at interface was observed to behave less magnetically than the interior Ni atoms. The polar Kerr rotation exhibited an increasing trend with decreasing wavelength in the spectral range of 7000-4000 $\AA$. The maximum of polar Kerr rotation was found to shift to higher wavelengths with increase in nickel sublayer thickness.

• Communications for Statistical Applications and Methods
• /
• 제20권5호
• /
• pp.347-356
• /
• 2013

We propose a sequential method to construct approximate confidence limits for the ratio of two independent sequences of binomial variates with unequal sample sizes. Due to the nonexistence of an unbiased estimator for the ratio, we develop the procedure based on a modified maximum likelihood estimator (MLE). We generalize the results of Cho and Govindarajulu (2008) by defining the sample-ratio when sample sizes are not equal. In addition, we investigate the large-sample properties of the proposed estimator and its finite sample behavior through numerical studies, and we make comparisons from the sample information view points.

• Journal of the Korean Statistical Society
• /
• 제32권1호
• /
• pp.33-46
• /
• 2003

The continual reassessment method (CRM) provides a Bayesian estimation of the maximum tolerated dose (MTD) in phase I clinical trials. The CRM has been proposed as an alternative design of the standard design. The CRM has been modified to improve practical feasibility and, recently, the likelihood approach CRM has been proposed. In this paper we investigate the consistency and asymptotic normality of the modified likelihood approach CRM in which the maximum likelihood estimate is used instead of the posterior mean. Small-sample properties of the consistency is examined using complete enumeration. Both the asymptotic results and their small-sample properties show that the modified CRML outperforms the standard design.

• 한국지반공학회논문집
• /
• 제15권5호
• /
• pp.217-228
• /
• 1999

본 논문에서는 절리암반에서 발생하는 지하수 유동과 굴착된 지하공동으로의 지하수 유입량을 해석하는 대표체적법, 비대표체적법 및 절리망 해석법을 소개하고 절리의 수와 공동의 직경을 변화시키면서 각 해석법의 특징과 결과를 비교하였다. 선처리 과정으로서 다수의 절리가 서로 교차하는 절리암반의 등가 수리전도계수를 산정하는 이론과 계산 과정(일명, 순차적 해석)이 소개되었다. 유한요소망과 절리도 및 순차적 해석을 이용하여 445개 요소 각각의 등가 수리전도계수를 계산하였으며 절리암반의 비균질 수리전도성과 대표물성 결정에 관해 논의하였다. 대표체적법에서는 대표물성을 통해 절리암반의 균질화가 이루어졌으며 따라서 절리밀도, 공동의 직경 및 수리전도대비의 증가에 따른 지하수 유입량의 증가도 규칙적이며 일관성 있는 경향을 보였다. 비대표체적법에서는 암반의 비균질성이 요소 단위로 해석에 반영됨으로써 유입량의 변화 양상은 불규칙하였으나 특성 치수가 증가함에 따라 대표체적법의 결과에 접근하는 경향을 보였다. 절리망 해석은 절리밀도, 공동크기 및 절리망과 공동의 교차 여부 등에 가장 민감하게 반응하였으나 해석결과의 신뢰도가 개별 절리에 관한 자료에 너무 의존하게 되는 단점이 있다. 제한된 범위에서 수집될 수밖에 없는 현장 절리자료의 불확실성을 감안할 때 대표체적법과 비대표체적법이 실질적으로 더 합리적인 해석방법으로 인식되었다.

• 지구물리와물리탐사
• /
• 제16권4호
• /
• pp.257-267
• /
• 2013

철광산 지역에서 획득한 시추자료와 물리탐사자료를 복합 분석하여 3차원 광체모델링을 수행하였다. 지질조사 및 시추조사 자료를 통해 획득한 5가지 대표 암종에 지수를 부여하였고, 이를 이용하여 광체의 범위를 효율적으로 결정하기 위해 지구통계학적 순차 지표 시뮬레이션(Sequential Indicator Simulation)을 실시하였다. 그리고 전기비저항 탐사 자료와 자기지전류 탐사 자료를 이용한 부가적인 자료를 생성하기 위해 정규크리깅(Ordinary Kriging)과 순차가우스시뮬레이션(Sequential Gaussian Simulation)을 사용하였다. 시추자료에서 획득한 입력변수와 전기비저항자료 간의 상관관계를 분석하여 지구통계학적 복합 분석에 적용하였다. 상관관계 분석 결과, 밀도가 높아질수록 전기비저항이 낮아지는 관계를 확인할 수 있었으며, 이를 통해서 다변량 크리깅 중 하나인 가변적 지역평균 크리깅(Simple Kriging with Local varying means)을 적용하여 지수를 이용한 광체의 모델과 품위 자료를 이용한 품위 분포 모델을 생성하였다. 광체 모델링 결과, 실제 채굴도와 유사한 결과를 확보할 수 있었고, 품위자료에 대한 모델링 결과는 품위별 위치에 따른 변화 정보를 제공하였다.

• 한국대기환경학회지
• /
• 제34권1호
• /
• pp.177-186
• /
• 2018

It is a well-known fact that precipitation plays an important role in capturing ambient particles, however, the details of particle scavenging properties have not been fully proved. To clarify the particle scavenging properties, a complementary study was carried out with the bulk and semi-bulk rain samples collected in an urban city of Japan. pH showed a continued downturn for a little bit at the beginning rainfall and then a turn-up in the following rainfall. The recorded pH values of rainwater (ranged from 3.5-4.6) demonstrated that the strong acid rain was observed during our field measurements. Compared to the subsequent rainfall, electrical conductivity in the beginning rainfall had about 1.3 times higher level. Sulfur showed an overwhelmingly high concentration compared to other elements in both ambient total suspended particles (TSP) and rain samples. On the contrary to ambient TSP, every element including Ca and Zn in rain showed a continued rise in concentration accompanied by increasing of rainfall amount. During the first period of the rainfall there was no meaningful change in elemental carbon concentration, however, it was largely increased (up to $0.2mg\;L^{-1}$) in the sequential rainfall (4.0-4.5 mm rainfall amount). The theoretically calculated number concentration of particles scavenged by raindrops showed a strong decrease of with the increasing droplet diameter regardless of particle type.

• Smart Structures and Systems
• /
• 제26권4호
• /
• pp.419-433
• /
• 2020

Investigation of structural integrity has been a critical issue in the field of civil engineering for years. Visual inspection is one of the most available methods to explore deteriorative components in structures. Still, this method is not applicable to invisible damage of structures. Alternatively, system identification methods are capable of tracking modal properties of structures over time. The deviation of these dynamic properties can serve as indicators to access structural integrity. In this study, a modal tracking technique using frequency-domain system identification from seismic responses of structures is proposed. The method first segments the measured signals into overlapped sequential portions and then establishes multiple Hankel matrices. Each Hankel matrix is then converted to the frequency domain, and a temporal-average frequency-domain Hankel matrix can be calculated. This study also proposes the frequency band selection that can divide the frequency-domain Hankel matrix into several portions in accordance with referenced natural frequencies. Once these referenced natural frequencies are unavailable, the first few right singular vectors by the singular value decomposition can offer these references. Finally, the frequency-domain stochastic subspace identification tracks the natural frequencies and mode shapes of structures through quick stabilization diagrams. To evaluate performance of the proposed method, a numerical study is carried out. Moreover, the long-term monitoring strong motion records at a specific site are exploited to assess the tracking performance. As seen in results, the proposed method is capable of tracking modal properties through seismic responses of structures.

• 자원환경지질
• /
• 제35권3호
• /
• pp.285-297
• /
• 2002

본 연구는 물리화학적 분석을 토대로 산불지 토양에 영향을 미치는 중요한 인자의 특성을 파악하려 하였으며, 산불지 2차피해저감기법의 개발에 획득한 결과를 활용하는데 그 목적이 있다. 연구대상지는 강원도 강릉시와 동해시에 소재한 임야이며, 산불발생시기는 2000년 12월경이다. 토양시료는 산불발생후 약 1년이 지난 2001년 11월에 산불지와 비산불지, 표토와 심토를 대상으로 구분하여 채취하였다. 산불지 표토 (0-5 cm)중의 pH는 비교지에 비하여 높은 특성을 보였으며, 심토 (5-40 cm)중의 pH는 비교지에 비하여 낮은 특성을 보였다. 토성분류 결과, 산불로 소실된 초목류의 잔류물이 산불지 토성에 영향을 주었으며, 지질적 특성에 따라서도 토성의 차이가 있음을 확인하였다. 유기물함량은 산불지에서 높게 나타났지만 예외적으로 탄질셰일이 많이 분포하는 산불지에서는 비교지에 비하여 유기물함량이 낮은 것으로 나타났다. 풍화지수는 산불지에서 낮게 나타났으며 이는 산불지 표토의 유실과 관련이 있다. Fe(Fe$^{2+}$ or Fe$^{3+}$ )이온은 강우나 강설등에 의하여 산불지 표토로부터 쉽게 용탈되는 반면에 Mn이온은 콜로이드의 물리화학적 흡착작용에 의하여 산불지 토양 중에 그대로 잔류하는 특성을 확인하였다. 연속추출법을 통하여 산불지에서 Fe이온의 용탈이 있음을 확인하였으며, Mn이온의 용출특성이 교란되었음을 확인하였다. 요인분석결과에서도 산불로 인하여 인자들간의 수반특성이 교란되었음을 확인하였다.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.81-87
• /
• 2009

Recently, extruded aluminium-alloy panels have been used in the car bodies for the purpose of the light-weight of railway vehicles and FSW(Friction Stir Welding), which is superior to the arc weldings, has been applied in the railway vehicles. This paper presents the optimum design of the FSW process on A6005 extruded alloy for railway vehicles to improve its mechanical properties. Rotational speed, welding speed and tilting angle of the tool tip were chosen as design parameters. Three objective functions were determined; maximizing the tensile strength, minimizing the hardness and maximizing the difference between the normalized tensile strength and hardness. The tensile tests and the hardness tests for fifteen FSW experiments were carried out according to the central composite design table. Recursive model functions on three characteristic values, such as the tensile strength, the hardness difference(${\Delta}Hv$) and the difference of normalized tensile strength and ${\Delta}Hv$, were estimated according to the classical response surface analysis methodology. The reliability of each recursive function was verified by F-test using the analysis of variance table. Sensitivity analysis on each characteristic value was done. Finally, the optimum values of three design parameters were found using Sequential Quadratic Programming algorithm.

• 한국수소및신에너지학회논문집
• /
• 제2권1호
• /
• pp.29-37
• /
• 1990

The effect of pressure cycling of $Zr_{0.9}Ti_{0.1}Cr_{0.7}Fe_{1.3}$ on the hydrogenation properties was investigated using the P-C-Isotherm curves and hydrogen absorption rate curves in the isotherm condition. The reversible hydrogen absorption capacity was decreased about 45 % after 3300 cycles. In the case of activated sample, the rate controlling steps of hydriding reaction changed from the surface reaction to the hydrogen diffusion process through hydride phase sequentially as reaction proceeded. After 3300 cycles, the sequential change of rate controlling step was same as activated one. However, the hydrogen absorption rate significantly decreased. It is suggested that the degradation of $Zr_{0.9}Ti_{0.1}Cr_{0.7}Fe_{1.3}$ can be interpreted with the formation of $ZrFe_3$ phase at the particle surface.