• 전기학회논문지
• /
• 제68권1호
• /
• pp.159-166
• /
• 2019

Due to the various engagement situations, it is very difficult to generate the optimal trajectory with several constraints. This paper investigates the sequential convex programming for the impact angle control with the additional constraint of altitude limit. Recently, the SOCP(Second-Order Cone Programming), which is one area of the convex optimization, is widely used to solve variable optimal problems because it is robust to initial values, and resolves problems quickly and reliably. The trajectory optimization problem is reconstructed as convex optimization problem using appropriate linearization and discretization. Finally, simulation results are compared with analytic result and nonlinear optimization result for verification.

• 한국항공우주학회지
• /
• 제50권11호
• /
• pp.771-781
• /
• 2022

순차 컨벡스 최적화 기법을 사용한 궤적 최적화로 무인기 기초 설계 형상의 성능 분석을 수행했다. 외부 공력 모델로 설계한 비선형 궤적 최적화 문제는 볼록화와 이산화를 통해 2차 원뿔 프로그램 문제로 근사 되었다. 알고리즘의 성능 향상을 위해 제약조건을 완화한 문제의 해를 초기 궤적으로 사용했다. 근사해의 반복적인 탐색으로 하강 궤적 최적화 문제들을 분석했으며 설계 형상의 구동부 성능에 따른 최대 도달 속도를 비교했다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권11호
• /
• pp.4595-4610
• /
• 2020

In the practical communication environment, the accurate channel state information (CSI) is difficult to obtain, which will cause the mismatch of resource and degrade the system performance. In this paper, to account for the channel uncertainties, a robust power allocation scheme for a downlink Non-orthogonal multiple access (NOMA) heterogeneous network (HetNet) is designed to maximize energy efficiency (EE), which can ensure the quality of service (QoS) of users. We conduct the robust optimization model based on worse-case method, in which the channel gains belong to certain ellipsoid sets. To solve the non-convex non-liner optimization, we transform the optimization problem via Dinkelbach method and sequential convex programming, and the power allocation of small cell users (SCUs) is achieved by Lagrange dual approach. Finally, we analysis the convergence performance of proposed scheme. The simulation results demonstrate that the proposed algorithm can improve total EE of SCUs, and has a fast convergence performance.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.419-424
• /
• 1999

In this paper, the comparison of the first order approximation schemes such as SLP (sequential linear programming), CONLIN(convex linearization), MMA(method of moving asymptotes) and the second order approximation scheme, SQP(sequential quadratic programming) was accomplished for optimization of and nonlinear structures. It was found that MMA and SQP(sequential quadratic programming) was accomplished for optimization of and nonlinear structures. It was found that MMA and SQP are the most efficient methods for optimization. But the number of function call of SQP is much more than that of MMA. Therefore, when it is considered with the expense of computation, MMA is more efficient than SQP. In order to examine the efficiency of MMA for complex optimization problem, it was applied to the helicopter tail boom considering column buckling and local wall buckling constraints. It is concluded that MMA can be a very efficient approximation scheme from simple problems to complex problems.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.245-250
• /
• 1999

In this study, the development of graphic user interface(GUI) program for optimum design of RC continuous beam is dealt. Optimum design problem that satisfies strength, serviceability, durability and geometrical conditions is formulated as a non-linear programming problem(NLP) in which the objective function as well as the constraints are highly non-linear on design variables such as cross sectional dimensions and steel ratio. Optimum design problem is solved by NLP techniques namely, sequential linear programming(SLP), sequential convex programming(SCP). Numerical examples of R.C. continuous beam using GUI system are given to show usefulness of GUI system for practical design work and efficiency of algorithm for the NLP techniques.

• Structural Engineering and Mechanics
• /
• 제10권2호
• /
• pp.181-195
• /
• 2000

A two-step procedure for the application of non linear constrained programming to the limit analysis of rigid brick-block systems with no-tension and frictional interface is implemented and applied to various masonry structures. In the first step, a linear problem of programming, obtained by applying the upper bound theorem of limit analysis to systems of blocks interacting through no-tension and dilatant interfaces, is solved. The solution of this linear program is then employed as initial guess for a non linear and non convex problem of programming, obtained applying both the 'mechanism' and the 'equilibrium' approaches to the same block system with no-tension and frictional interfaces. The optimiser used is based on the sequential quadratic programming. The gradients of the constraints required are provided directly in symbolic form. In this way the program easily converges to the optimal solution even for systems with many degrees of freedom. Various numerical analyses showed that the procedure allows a reliable investigation of the ultimate behaviour of jointed structures, such as stone masonry structures, under statical load conditions.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.59-65
• /
• 2000

In this paper the comparison of the first order approximation schemes such as SLP(sequential linear programming) CONLIN(convex linearization) MMA(method of moving asymptotes) and the second order approximation scheme SQP(sequential quadratic programming) was accomplished for optimization of nonlinear structures. It was found that MMA and SQP are the most efficient methods for optimization. But the number of function call of SQP is much more than that of MMA. Therefore when it is considered with the expense of computation MMA is more efficient than SQP. In order to examine the efficiency of MMA for complex optimization problem it was applied to the helicopter tail boom con-sidering column buckling and local wall buckling constraints. it is concluded that MMA can be a very efficient approxima-tion scheme from simple problems to complex problems.

• ETRI Journal
• /
• 제36권4호
• /
• pp.686-689
• /
• 2014

This paper studies energy-efficiency (EE) power allocation for cognitive radio MIMO-OFDM systems. Our aim is to minimize energy efficiency, measured by "Joule per bit" metric, while maintaining the minimal rate requirement of a secondary user under a total power constraint and mutual interference power constraints. However, since the formulated EE problem in this paper is non-convex, it is difficult to solve directly in general. To make it solvable, firstly we transform the original problem into an equivalent convex optimization problem via fractional programming. Then, the equivalent convex optimization problem is solved by a sequential quadratic programming algorithm. Finally, a new iterative energy-efficiency power allocation algorithm is presented. Numerical results show that the proposed method can obtain better EE performance than the maximizing capacity algorithm.

• 한국전산구조공학회논문집
• /
• 제13권1호
• /
• pp.1-11
• /
• 2000

본 논문에서는 철근콘크리트 연속보의 최적설계 문제를 다루었으며, 설계실무에서 사용하기 위한 GUI 시스템을 개발하였다. 최적설계 문제형성을 위해 목적함수로 콘크리트, 철근 그리고 거푸집의 경비함수로 취하였고, 설계변수는 보의 폭과 유효높이 그리고 철근비이다. 제약조건으로 강도, 사용성, 내구성 그리고 기하학적인 조건을 고려하였다. 이렇게 형성된 비선형 최적설계문제는 축차선형계획기법과 축차볼록계획기법을 사용하여 최적해를 구하였으며 그 효율성을 비교하였다. 또한 실제 설계실무에서 손쉽게 사용할 수 있도록 visual basic을 이용한 GUI 시스템을 개발하여 수치예를 통한 적용성을 보였다.

• 한국항공우주학회지
• /
• 제50권11호
• /
• pp.763-770
• /
• 2022

다수의 드론이 운용되는 환경에서 경로점이 겹칠 때 충돌이 발생할 수 있으며 이를 대비한 충돌 회피는 필수적이다. 다수의 드론이 여러 임무를 수행하는 경우 드론의 경로가 복잡하고 충돌 예상점이 너무 많아 경로계획 단계에서 충돌을 회피하는 경로를 생성하는 방법을 사용하는 것은 적합하지 않다. 본 논문에서는 일반적으로 사용하는 경로 생성 알고리즘을 통해 경로를 생성하고, 그 경로에서 속도 프로파일 최적화를 이용한 충돌 회피 방법을 제안한다. 드론의 경로 간 충돌 예상점에서 드론 사이의 안전거리를 고려하였고, 경로 구간에 속도 프로파일을 할당하도록 설계하였다. 최적화 문제는 드론 간 거리에 대한 식을 비행시간을 변수로 두어 정의하였다. 선형화와 컨벡스화를 통해 구속 조건을 구성하고, 다수 드론 운용 환경에서 SQP(Sequential Quadratic Programming)알고리즘과 컨벡스 최적화 기법의 연산시간을 비교하였다. 마지막으로 20대 드론 운용 환경에서 컨벡스 최적화를 수행한 결과가 본 연구에서 제시한 다수 드론 운용에 적합한지 확인하였다.