• Korean Membrane Journal
• /
• 제5권1호
• /
• pp.25-30
• /
• 2003

Chitosan membranes crosslinked with glutaraldehayde that contained chiral environment were prepared. The chitosan membranes were characterized using FTIR and swelling index measurements. Their swelling index in water ranged from 100 to 70%, depending on the crosslinking time. The separation of D- and L-isomers of tryptophan was achieved through a pressure driven membrane separation process, using the self-supporting crosslinked chitosan membranes. The chiral separation performance of the membranes depended strongly on the swelling index of the membranes and the separation conditions such as concentration of feed solutions and different operating pressures. Especially when a chitosan membrane with a swelling index of 70% was used, almost complete optical resolution of D- and L-tryptophan was obtained ; enantiomeric excess (ee %) of 97.92% and flux of 2.26 g/㎡$.$h.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.393-398
• /
• 2006

This study is undertaken to evaluate the characteristics of cross contamination around exterior air-vents. A CFD analysis has been performed to calculate the cross contamination index for five exterior air-vents sizes according to the outdoor air velocity and separation distance of it. From the result of the numerical method, As the outdoor air velocity is increased, the cross contamination index is increased. on the contrary, as the separation distance of exterior air-vents is increased, the cross contamination index is decreased, additionally the cross contamination is affected by the aspect ratio of the size of exterior Air-vents.

• Applied Biological Chemistry
• /
• 제39권1호
• /
• pp.95-98
• /
• 1996

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2007-2016
• /
• 2011

In this paper, a new algorithm for alleviating overloads in power networks by the use of line power tracing and sensitivity is proposed to perform line switching and bus separation effectively. Also, a new bus separation index based on line power tracing is presented to find the bus to be separated for relieving overloads effectively. By applying the sensitivity of the line flow with respect to the change of the line impedance, both switching-on and switching-off of the lines for alleviating overloads in power networks are performed systematically at once. The number of the considered cases for line switching and bus separation can be greatly reduced and the best combination of line switching and bus separation can be acquired efficiently by the use of the sensitivity and the bus separation index. In order to show the effects of this algorithm, it is applied to a small scale power system of IEEE 39-bus system and practical power systems of KEPCO.

• 한국지능시스템학회논문지
• /
• 제13권4호
• /
• pp.455-460
• /
• 2003

본 논문에서는 퍼지 클러스터링 알고리즘에 의해 구해진 퍼지 분할에 대한 최적 클러스터 수를 결정하는 방법을 제안한다. 제안된 척도는 퍼지 클러스터들간의 중첩성과 분리성을 이용한다. 중첩성은 클러스터간 인접도를 이용하여 계산하며, 분리성은 데이터에 대한 상관성 정도로 나타낸다. 따라서 중첩성이 낮고 분리성이 높을수록 좋은 클러스터 결과라고 할 수 있다. 표준 데이터 집합을 대상으로 기존의 척도들과 비교 실험함으로써 제안된 척도의 신뢰성을 검증하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제10권2호
• /
• pp.341-357
• /
• 1999

Greenwich and Jahr-Schaffrath(1995) considered a new process incapability index(PII) $C_{pp}$, which modified the useful index $C^{\ast}_{pm}{$ for detecting assignable causes. The new index $C_{pp}$ provides an uncontaminated separation between information concerning the process accuracy and precision while this kind of information separation is not available with the $C^{\ast}_{pm}$ index. In this paper, we will study about the index $C_{pp}$ based on the bootstrap. First, we will prove the consistency of bootstrap deriving the bootstrap asymptotic distribution for our index $C_{pp}$. Moreover, with the consistency of bootstrap, we will construct six bootstrap confidence intervals and compare their performances. Some simulation results, comparison and analysis are provided. In particular, two STUD and ABC bootstrap methods perform significantly better.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.267-268
• /
• 2008

• 한국식품과학회지
• /
• 제23권5호
• /
• pp.593-598
• /
• 1991

자포니카계통의 쌀을 원료로 즉석건조쌀밥을 제조할 때, 에멀젼의 처리가 즉석건조쌀밥의 건조 후 밥알분리 및 복원된 밥의 품질에 미치는 영향에 대하여 조사하였다. 에멀젼의 처리단계는 건조전 취반미를 에멀젼에 침지하는 것이 효과적이었으며, 침지조건은 $30^{\circ}C$, 3분이 우수하였다. 에멀젼으로는 5%의 대두유와 0.5%의 자당 지방산에스테르(HLB : 9.5)를 사용하였을 때 가장 효율적인 분리율을 나타냈다. 이상의 조건으로 에멀젼을 제조, 처리하였을 경우 건조 후 밥알분리도는 무처리군에 비해 30% 정도 향상되었고, 품질은 무처리군과 유의적인 차이를 나타내지 않았다.

• 산업경영시스템학회지
• /
• 제21권48호
• /
• pp.233-240
• /
• 1998

Recently, Hong-Jun Kim et al. introduced an improved process incapability index $C^*_{psk}$ by the transformation of the $C_{psk}{\;}C^*_{psk}$. A simple transformation of $C_{psk}$, can be regard as a process incapability index, provides an uncontaminated separation between information concerning the process accuracy and precision while this kind of information separation is not available with the $C_{psk}$. By an identical conception, in this article a new process incapability index $C^*_{psk}$ for Non-Normal process can be proposed by the transformation of the process capability index $C^*_{psk}$. The motivation behind introduction of $C^*_{psk}$ is that process capability index $C^*_{psk}$ cannot give information of the process accuracy and precision. A significant result of this research that $C^*_{psk}$ for the case where the target value T is equal to the midpoint of the specification limits or not Is evaluated without respect to T. Accordingly, $C^*_({psk})$ will be propose a reasonable process incapability measure for Non-Normal process

• 산업경영시스템학회지
• /
• 제22권49호
• /
• pp.77-87
• /
• 1999

A simple transformation of the $C^{*}$$_{pm}$, $C_{pp}$ can be regard as a process incapability index, provides an uncontaminated separation between information concerning the process accuracy and precision while this kind of information separation is not available with the $C^{*}$$_{pm}$. Recently, Kyung-seok Shin et. al. introduced an improved process incapability index $C^{*}$$_{pmk}$ by the transformation of the $C_{pmk}$. Accordingly, in this article process incapability index $C^{*}$$_{psk}$ will be proposed by the transformation of the $C_{psk}$. The motivation behind introduction of $C^{*}$$_{psk}$ is that $C_{psk}$ has failed to overcome is that it cannot distinguish process of high conforming output proportions from those of low conforming output proportions. Process incapability index $C^{*}$$_{psk}$ can identify a difference between two things by comparison on $C_{psk}$ and $C^{*}$$_{psk}$.EX>$_{psk}$.EX>$_{psk}$.