• 제목/요약/키워드: separated set

검색결과 320건 처리시간 0.022초

유한요소법에 의한 DI 스위칭 소자의 모델링에 관한 연구 (A Study on the Modeling of DI Switching Device by FEM)

  • Lee, Hyun-Seok;Lee, Kye-Hoon;Rhle, Dong-Hee;Park, Sung-Hee
    • 대한전기학회논문지
    • /
    • 제43권2호
    • /
    • pp.285-295
    • /
    • 1994
  • Double Injection(DI) switching devices consist of PS0+T and nS0+T contact separated by a nearly intrinsic semiconductor region containing deep trap. The equation set for DI switching device simulation by FEM is proposed. The existance of deep trap requires the modification of conventional equation set. So recombination rate equation is modified and a new equation is included in the equation set which conventionally consists op Poisson equation and current continuity equation. Consequently, the modeling equation set, which is proposed in this paper, can be applied to other semiconductor devices with trap.

국내 프랜차이즈 미용실의 공간 특성에 관한 연구-세트부스를 중심으로- (A Study on the Spatial Characteristics of Franchise Beauty Salon in Korea)

  • 홍승대;이상호;신은주
    • 한국실내디자인학회논문집
    • /
    • 제22호
    • /
    • pp.16-22
    • /
    • 2000
  • The purpose of this study is to analyze characteristics of set-booth in beauty salon as well as to suggest the basic design data for franchise beauty salon. The method of this research was based on field observation of the franchise beauty salon in Seoul. The results of this research are as follows. 1) In set-booth type analysis, set-mirror wall type and set-mirror partition type are mainly used, but set-mirror table type is not showed in this research. 2) In terms of scale, wall type and partition type are classified as large scale, wall type and partition type are used as meduim scale. In shop front analysis, the result is shown in two things. If it is type, they used partition type and if it is close type, they used wall type. 3) Set-mirror is consisted of mirror and drawer and it is classified by 4 types with combination method. In a result, most of them used separated mirror type because they want to emphasize the separation between set booth and its layout. 4) Lighting method has 4 types; corniced type, bracket type, pendant type and downlight type. Among them, downlight is showed as the most-used.

  • PDF

Changes in Dietary Guidance: Implications for Food Composition Tables

  • Murphy, Suzanne P.
    • Nutritional Sciences
    • /
    • 제7권2호
    • /
    • pp.88-91
    • /
    • 2004
  • New Dietary Reference Intakes (DRIs) forthe United States and Canada have recently been set for both macronutrients and micronutrients, and are likely to be of interest to health professionals in Korea as well. DRIs are now available for nutrients that did not have Recommended Dietary Allowances set in the past (amino acids, n-3 and n-6 fatty acids, total fiber, added sugar, choline, boron, nickel, and vanadium). Furthermore, the units for the DRIs do not always match those traditionally carried on food composition tables (FCTs). FCT developers will also need to consider carrying new variables to allow the calculation of folate intake in $\mu$g of dietary folate equivalents, vitamin E intake as mg of a-tocopherol (not as mg of a-tocopherol equivalents), and vitamin A intake as $\mu$g of retinol activity equivalents (not as $\mu$g of retinol equivalents). Because the new recommendations for upper levels of intake sometimes refer to a specific form or source of a nutrient, nutrients occurring in foods must be separated from added or supplemental forms for vitamin E, niacin, and folate; pharmacological magnesium must be carried as a separate variable; and preformed vitamin A must be separated from vitamin A from carotenoids. For more information on the DRIs, see: www.nap.edu.

Urease Characteristics and Phylogenetic Status of Bacillus paralicheniformis

  • Jeong, Do-Won;Lee, Byunghoon;Lee, Hyundong;Jeong, Keuncheol;Jang, Mihyun;Lee, Jong-Hoon
    • Journal of Microbiology and Biotechnology
    • /
    • 제28권12호
    • /
    • pp.1992-1998
    • /
    • 2018
  • In 2015, Bacillus paralicheniformis was separated from B. licheniformis on the basis of phylogenomic and phylogenetic studies, and urease activity was reported as a phenotypic property that differentiates between the two species. Subsequently, we have found that the urease activity of B. paralicheniformis is strain-specific, and does not reliably discriminate between species, as strains having the same urease gene cluster were identified in B. licheniformis and B. sonorensis, the closest relatives of B. paralicheniformis. We developed a multilocus sequence typing scheme using eight housekeeping genes, adk, ccpA, glpF, gmk, ilvD, pur, spo0A, and tpi to clearly identify B. paralicheniformis from closely related Bacillus species and to find a molecular marker for the rapid identification of B. paralicheniformis. The scheme differentiated 33 B. paralicheniformis strains from 90 strains formerly identified as B. licheniformis. Among the eight housekeeping genes, spo0A possesses appropriate polymorphic sites for the design of a B. paralichenofomis-specific PCR primer set. The primer set designed in this study perfectly separated B. paralicheniformis from B. licheniformis and B. sonorensis.

Simplified HPLC Method for the Determination of Pseudoephedrine Hydrochloride from Allegra D Tablet

  • Park, Moon-Hee;Shin, In-Chul
    • Biomolecules & Therapeutics
    • /
    • 제15권2호
    • /
    • pp.123-126
    • /
    • 2007
  • A sensitive, simple and highly selective liquid chromatography method of determination for extraction of pseudoephedrine hydrochloride from Allegra D tablet was developed. The chief benefit of the present method is the minimal sample preparation, as the procedure is only filtering through pore syringe filter. Two drugs (pseudoephedrine hydrochloride, fexofenadine) were separated on a C$_{18}$ column and analyzed by high performance liquid chromatography (HPLC). The method had a chromatographic run time of 8.0 min. 1 ml of pseudoephedrine hydrochloride solution (1 mg/ml) was filtered through 0.22 um pore syringe filter. 50 ul of filtering solution was injected to HPLC pump and we knew the retention time (1.85 min) of separating of pseudoephedrine hydrochloride using UV detector at 280 nm. We used C$_{18}$ column (4.6 mm${\times}$250 mm), mobile phase solution (<0.05 mol/L NaH$_2$PO$_4$, 2 ml/L H$_3$PO$_4$>/CH$_3$CN / sodium dodesyl sulfate = 60 ml / 40 ml / 1 g). We separated psedoephedrine hydrochloride at run time of 1.85 min from Allegra D tablet solution (1 mg/ml) filtered through 0.22 um pore syringe filter using UV detector at 280 nm. Flow rate was set at 1.0 ml/min and the column temperature was set at 40$^{\circ}C$. Psedoephedrine hydrochloride solution (1 mg/ml) separated from Allegra D tablet was filtered through 0.22 um pore syringe filter and injected 50 ul. We confirmed the peak of psedoephedrine hydrochloride at same retention time and the separating solution was freeze-dried. In conclusion, A simple isocratic reverse-phase HPLC method has been developed that provides excellent separation of pseudoephedrine from Allegra D tablet.

Solid Waste from Swine Wastewater as a Fuel Source for Heat Production

  • Park, Myung-Ho;Kumar, Sanjay;Ra, ChangSix
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제25권11호
    • /
    • pp.1627-1633
    • /
    • 2012
  • This study was to evaluate the feasibility of recycling the solids separated from swine wastewater treatment process as a fuel source for heat production and to provide a data set on the gas emissions and combustion properties. Also, in this study, the heavy metals in ash content were analyzed for its possible use as a fertilizer. Proximate analysis of the solid recovered from the swine wastewater after flocculation with organic polymer showed high calorific (5,330.50 kcal/kg) and low moisture (15.38%) content, indicating that the solid separated from swine wastewater can be used as an alternative fuel source. CO and NOx emissions were found to increase with increasing temperature. Combustion efficiency of the solids was found to be stable (95 to 98%) with varied temperatures. Thermogravimetry (TG) and differential thermal analysis (DTA) showed five thermal effects (four exothermic and one endothermic), and these effects were distinguished in three stages, water evaporation, heterogeneous combustion of hydrocarbons and decomposition reaction. Based on the calorific value and combustion stability results, solid separated from swine manure can be used as an alternative source of fuel, however further research is still warranted regarding regulation of CO and NOx emissions. Furthermore, the heavy metal content in ash was below the legal limits required for its usage as fertilizer.

파라미터 불확실성 시스템에 대한 견실 비약성 $H^\infty$ 제어기 설계 ((Robust Non-fragile $H^\infty$ Controller Design for Parameter Uncertain Systems))

  • 조상현;김기태;박홍배
    • 전자공학회논문지SC
    • /
    • 제39권3호
    • /
    • pp.183-190
    • /
    • 2002
  • 본 논문에서는 구조화된 어파인(affine) 파라미터 불확실성을 가지는 시변 선형시스템과 구조적 불확실성을 가지는 상태궤환 제어기에 대한 견실 비약성 H∞ 제어기 설계방법을 다루었다. 또한 견실 비약성 H∞ 제어기가 존재할 충분조건, 제어기 설계방법 및 비약성을 만족하는 제어기의 꽉찬 집합(compact set)을 제시하였다. 이 때 제시한 조건은 변수치환과 슈어 여수(Schur complement)정리를 통하여 선형행렬부등식 (LMI : Linear Matrix Inequality)의 계수가 꽉찬 집합 내의 파라미터의 함수로 정의되는 파라미터화 선형 행렬부등식(PLMls: parameterized Linear Matrix Inequalities)으로 표현되므로 분리 볼록개념 (separated convexity concepts)에 기초한 완화기법을 이용하여 유한개의 LMI로 변환하였다. 그리고 본론문에서 제시한 견실 비약성 H∞ 제어기가 제어기이득의 변화에도 불구하고 폐루프시스템의 점근적 안정성 (asymptotic stability)과 외란감쇠 성능을 보장함을 보였다.

주조공정 설비에 대한 실시간 모니터링을 통한 불량예측에 대한 연구 (A Study on Defect Prediction through Real-time Monitoring of Die-Casting Process Equipment)

  • 박철순;김흥섭
    • 산업경영시스템학회지
    • /
    • 제45권4호
    • /
    • pp.157-166
    • /
    • 2022
  • In the case of a die-casting process, defects that are difficult to confirm by visual inspection, such as shrinkage bubbles, may occur due to an error in maintaining a vacuum state. Since these casting defects are discovered during post-processing operations such as heat treatment or finishing work, they cannot be taken in advance at the casting time, which can cause a large number of defects. In this study, we propose an approach that can predict the occurrence of casting defects by defect type using machine learning technology based on casting parameter data collected from equipment in the die casting process in real time. Die-casting parameter data can basically be collected through the casting equipment controller. In order to perform classification analysis for predicting defects by defect type, labeling of casting parameters must be performed. In this study, first, the defective data set is separated by performing the primary clustering based on the total defect rate obtained during the post-processing. Second, the secondary cluster analysis is performed using the defect rate by type for the separated defect data set, and the labeling task is performed by defect type using the cluster analysis result. Finally, a classification learning model is created by collecting the entire labeled data set, and a real-time monitoring system for defect prediction using LabView and Python was implemented. When a defect is predicted, notification is performed so that the operator can cope with it, such as displaying on the monitoring screen and alarm notification.

광역망에서의 영상회의를 위한 중앙집중식 프로토콜 모델 (Centralized Protocol Model for Videoconference Service over Wide-Area-Networks)

  • 최양희
    • 한국통신학회논문지
    • /
    • 제18권12호
    • /
    • pp.1828-1840
    • /
    • 1993
  • 본 논문은 광역 통신망에서의 비디오회의를 위한 중앙집중식 프로토콜 모델을 제시한다. 이 모델은 사용자, 서버, 믹서의 세 요소로 구성된다. 서버는 호관리기능을 전부 취급하고, 믹서는 실시간 트래픽 혼합을 행한다. 제어와 데이터는 본모델에서 각각 분리된 커넥션을 따라 운반된다. 호관리 프로토콜, 미디어 트랜스포트 프로토콜, 멀티미디어 동기 프로토콜 등 새로운 프로토콜들이 정의되었다. 본논문은 또한 믹서의 기능설계도 포함하고 있다.

  • PDF

2-ENGELIZER SUBGROUP OF A 2-ENGEL TRANSITIVE GROUPS

  • Moghaddam, Mohammad Reza R.;Rostamyari, Mohammad Amin
    • 대한수학회보
    • /
    • 제53권3호
    • /
    • pp.657-665
    • /
    • 2016
  • A general notion of ${\chi}$-transitive groups was introduced by C. Delizia et al. in [6], where ${\chi}$ is a class of groups. In [5], Ciobanu, Fine and Rosenberger studied the relationship among the notions of conjugately separated abelian, commutative transitive and fully residually ${\chi}$-groups. In this article we study the concept of 2-Engel transitive groups and among other results, its relationship with conjugately separated 2-Engel and fully residually ${\chi}$-groups are established. We also introduce the notion of 2-Engelizer of the element x in G and denote the set of all 2-Engelizers in G by $E^2(G)$. Then we construct the possible values of ${\mid}E^2(G){\mid}$.