• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1229-1239
• /
• 2014

Optimal Distributed Generation (DG) output and reconfiguration are among the well accepted approach to reduce power loss in a distribution network. In the past, most of the researchers employed optimal DG output and reconfiguration separately. In this work, a simultaneous DG output and reconfiguration analysis is proposed to maximize power loss reduction. The impact of the separated analysis and simultaneous analysis are investigated. The test result on the 33 bus distribution network with 3 units of DG operated in PV mode showed the simultaneous analysis gave the lowest power loss (global optimal) and faster results compared to other combined methods. All the analyses for optimizing the DG as well as reconfiguration are used the Artificial Bee Colony Optimization technique.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.13-19
• /
• 2018

In this study, the lightweight design of butterfly valve disc component for power plant based on topology optimization was performed. Here, commercial finite element (FE) analysis software was used. The external shape of the basic disc model was not deformed, and the internal element density was removed to make it lightweight. Optimal design was performed each other after the disc plate and two brackets attached on the surface of the disc were separated. Once the optimal shapes were selected, they were assembled to build up the 3-D lightweight valve disc model. After applying pressure to this model, FE analysis was performed to confirm the structural safety.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3291-3300
• /
• 2023

Recently molybdenum alloys have been introduced as accident tolerating materials for cladding of fuel rods. Molybdenum element has seven stable isotopes with different neutron absorption cross section used in various fields, including nuclear physics and radioisotope production. This study presents separation approaches for all intermediate isotopes of molybdenum element by squared-off cascades using a newly developed numerical code with Salp Swarm Algorithm (SSA) optimization algorithm. The parameters of cascade including feed flow rate, feed entry stage, cascade cut, input feed flow rate to gas centrifuges (GCs), and cut of the first stage are optimized to maximize both isotope recovery and cascade capacity. The squared off and squared cascades are studied, and the efficiencies are compared. The results obtained from the optimization showed that for the selected squared off cascade, Mo⁹⁴ in four separation steps, Mo⁹⁵ in five steps, Mo⁹⁶ in six steps, Mo⁹⁷ in seven steps, and Mo⁹⁸ in two steps are separated to the desired concentrations. The highest recovery factor is obtained 63% for Mo⁹⁴ separation and lowest recovery factor is found 45% for Mo⁹⁵.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.85-92
• /
• 2018

Reductions of the electricity charge are achieved by demand management of the load. The demand management method of the load using ESS involves peak shifting, which shifts from a high demand time to low demand time. By shifting the load, the peak load can be lowered and the energy charge can be saved. Electricity charges consist of the energy charge and the basic charge per contracted capacity. The energy charge and peak load are minimized by Linear Programming (LP) and Quadratic Programming (QP), respectively. On the other hand, each optimization method has its advantages and disadvantages. First, the LP cannot separate the efficiency of the ESS. To solve these problems, the charge and discharge efficiency of the ESS was separated by Mixed Integer Linear Programming (MILP). Nevertheless, both methods have the disadvantages that they must assume the reduction ratio of peak load. Therefore, QP was used to solve this problem. The next step was to optimize the formula combination of QP and LP to minimize the electricity charge. On the other hand, these two methods have disadvantages in that the charge and discharge efficiency of the ESS cannot be separated. This paper proposes an optimization method according to the situation by analyzing quantitatively the advantages and disadvantages of each optimization method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.11
• /
• pp.858-868
• /
• 2009

A numerical investigation has been carried out about the performance of a 500MW class tangentially coal-fired boiler, focusing on the optimization of separated overfire air (SOFA) position to reduce NOx emission. For this purpose, a comprehensive combination of NOx chemistry models has been employed in the numerical simulation of a particle-laden flow along with solid fuel combustion and heat and mass transfer. A reasonable agreement has been shown in baseline cases for predicted operational parameters compared with experimental data measured in the boiler. A further SOFA calculation has been made to obtain optimum elevation and position of SOFA port. Additionally, clarifying on the effect of SOFA on NOx emission has been carried out in the coal-fired boiler. As a result, this paper is valuable to provide an information about the optimum position of SOFA and the mechanism by which the SOFA would affect NOx emission.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1470-1473
• /
• 2007

We have demonstrated the optimization of white organic light-emitting diodes with two separated emissive layers using a blue fluorescent and a red phosphorescent dopant. The maximum luminous efficiency of the devices showed 7.93, 9.70, 11.8, and 14.3 cd/A. The $CIE_{xy}$ coordinates also showed (x = 0.33, y = 0.36), (x = 0.33, y = 0.35), (x =0.31, y = 0.35), and (x = 0.29, y = 0.36) at 6V, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.4
• /
• pp.67-72
• /
• 2001

An Effort has been made to more accurately analyze the flow in the chip cavity, particularly to model the flow through the openings in the leadframe and correctly treat the thermal boundary condition at the leadframe. The theoretical analysis of the flow has been done by using the Hele-Shaw approximation in each cavity separated by a leadframe. The cross-flow through the openings in the leadframe has been incorporated into the Hele-Shaw formulation as a mass source term. The optimization program based on the complex method integrated with flow analysis program has been successfully used to obtain the optimal filling conditions to avoid short shot.

• Journal of Hydrogen and New Energy
• /
• v.25 no.2
• /
• pp.191-199
• /
• 2014

Effects of design variables on the performance of a double-inlet centrifugal blower have been analyzed based on the three-dimensional flow analysis. Two design variables, blade inlet and outlet angles, are introduced to enhance a blower performance. General analysis code, ANSYS-CFX13, is employed to analyze internal flow and a blower performance. SST turbulence model is employed to estimate the eddy viscosity. Throughout the shape optimization of an impeller at the design flow condition, the blower efficiency and pressure are successfully increased by 4.7 and 1.02 percent compared to reference one. It is noted that separated flow observed near cut-off region can be reduced by optimal design of blade angles, which results in stable flow pattern in the blade passage and increase of a blower performance. The stable flow at the impeller also makes good effects at the outlet of a volute casing.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.4
• /
• pp.692-699
• /
• 2008

Semiconductor research and development(R&D) fabs are very different than production fabs in many ways such as the scales of production, job priority, production methods, and performance measures. Efficient operations of R&D fabs are very important to the development of new product, process stability, high yield, and ultimately company competitiveness. This paper proposes the fab-wide scheduling method for operational optimization of the R&D fabs. Most scheduling systems of semiconductor fabs have only focused on maximizing throughput of each separated areas without considering WIP(works in process) flows of entire fab. In this paper, we proposes the a fab-wide scheduling system which schedules all lots to entire fab equipment at once. We develop the MIP(mixed integer programing) model which allocates the lots to production equipment considering many constraints of all processes and the CP(constraint programming) model which determines the sequences of the lots in the production equipment. The proposed FAB-wide scheduling model is applied to the newly constructed R&D fab. As a result, we have accomplished the system based automated job reservation, decrease of the hot lot delay, increase of the queue time satisfaction, the high throughput by maximizing the batch sizes, decrease of the WIP TAT(Turn Around Time).

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.183-188
• /
• 2009

The High speed electrical multiple train having a distributed electrical motor system has just been developing to aim the experimental maximum speed at 400km/h since August, 2007. This project comes in stage of basic design and so, it needs to take some review and analysis the characteristics of suspensions on the view of basic design. The vehicle model for dynamic analysis is made from the concept design model that used for the preliminary design review with Vampire program and it is modeled with three linear secondary dampers and two shear springs separated from the bush elements in previous model. The optimization technique is applied to search the proper range of linear characteristics for the suspension elements to satisfy the stability performance at speed 130m/s (about 460km/h). The results shows there are some optimum points according to the variation of primary and secondary suspension characteristics and it would be useful to make a decision to select the proper suspension elements in the precision design that will be done by the manufacturing company.