• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.11a
• /
• pp.88-91
• /
• 2004

The aim of this study was to grasp demands of residents about floor plans. This study grasped needs of residents through small group workshop that is composed of housewives. The data from this was analyzed by the side of human behavior in residence space privacy, private space, territoriality, intimacy or social interaction, delightfulness. the major findings are as follows; floor plans of apartment separate of private and public space evidently. But each space has to have possible of extension and combination. It is supported by systematical storage and variable wall system.

• The Journal of Society for e-Business Studies
• /
• v.15 no.1
• /
• pp.1-16
• /
• 2010

Confidentiality is one of the most important requirements of information protection systems. The access control technique has been used to provide confidentiality, but it has fundamental problems in that it cannot prevent violations of confidentiality committed by authorized users. Information flow control is a technique introduced to resolve such problems, and many approaches based on programming languages have been proposed. However, it is not easy for a programmer to implement the technique at the source code level. Furthermore, the practicality of information flow control is difficult to demonstrate because it does not provide control over programs that have already been developed. This paper proposes a method that enables a practical information flow control through using a protected area, a separate part of computer system storage. Case studies are given to show its usefulness.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.4
• /
• pp.237-244
• /
• 2014

We report novel and simple structure of supercapacitors fabricated by using flexible glass fibre separators as templates. This method does not require separate electrodes, binders and high pressure/temperature to build the supercapacitor unit cells as required by the conventional technology. The supercapacitors were fabricated by drop-casting solution mixtures of carbonaceous active materials/gel electrolytes onto two sides of glass fibre separators. Two carbonaceous materials (nanoscaled activated carbons, multi-walled carbon nanotubes) were investigated as electrode materials. The electrochemical measurements reveal that the separatorbased supercapacitors using ACs successfully demonstrated significant mass specific capacitance ($22.3F\;g^{-1}$) and energy density ($9.7Wh\;kg^{-1}$), indicating this method can be useful in fabricating flexible, wearable and stretchable energy storage devices in more straightforward and cost-effective way than current technology.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.359-366
• /
• 2001

This paper overviews the design of SANique$^{TM}$ -a shred file system for Linux cluster based on SAN environment. SANique$^{TM}$ has the capability of transferring user data from network-attached SAN disks to client applcations directly without the control of centralized file server system. The paper also presents the characteristics of each SANique$^{TM}$ subsystem: CFM(Cluster File Manager), CVM(Cluster Volume Manager), CLM(Cluster Lock Manager), CBM(Cluster Buffer Manager) and CRM(Cluster Recovery Manager). Under the SANique$^{TM}$ design layout, then, the syndrome of '||'&'||'quot;split-brain'||'&'||'quot; in shared file system environments is described and defined. The work first generalizes and illustrates possible situations in each of which a shared file system environment may split into two or more pieces of separate brain. Finally, the work describes the SANique$^{TM}$ approach to the given "split-brain"problem using SAN disk named "split-brain" and develops the overall recovery procedure of shared file systems.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.6
• /
• pp.345-359
• /
• 2011

In high performance embedded systems, the use of multiple on-chip memories is an essential architectural feature for exploiting inherent parallelism in multimedia applications. This feature allows multiple data accesses to be executed in parallel. However, it remains difficult to effectively exploit of multiple on-chip memories. The successful use of this architecture strongly depends on how to efficiently detect and exploit memory parallelism in target applications. In this paper, we propose a technique based on a linear array access descriptor [1], which is generated from profiled data, to detect and exploit memory parallelism. The proposed technique tackles an array reorganization problem to maximize memory parallelism in multimedia applications. We present preliminary experiments applying the proposed technique onto a representative coarse grained reconfigurable array processor (CGRA) with multimedia kernel codes. Our experimental results demonstrate that our technique optimizes data placement by putting independent data on separate storage. The results exhibit 9.8% higher performance on average compared to the existing method.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.241-246
• /
• 2019

Carbon master batch (CMB) rubber sheets, which are stored in stacks, are difficult to separate during reuse because of the adhesion between sheets caused by the stacked weight over time. To solve this problem, in the actual rubber product manufacturing process, various anti-tacking agents (solid powder or liquid surfactants) are applied to the sheet surface. In this study, the emulsion samples of zinc (Zn)-stearate/triethanolamine (TEA)-stearate mixtures were prepared using TEA-stearate as a surfactant, prepared using an industrially manufactured Zn-stearate powder, and their basic anti-tacking properties were studied. During the process of manufacturing emulsion, a heat treatment process and an auxiliary surfactant were introduced to improve the dispersion stability. Results showed that the heat-treated sample exhibited a significant improvement in terms of sedimentation, storage stability, and anti-tacking characteristics since the Zn-stearate particles were reduced to a smaller size by the heat-treatment than that of the original Zn-stearate powder.

• Journal of Ocean Engineering and Technology
• /
• v.38 no.3
• /
• pp.87-102
• /
• 2024

Given the inadequate regulatory framework for liquefied hydrogen gas storage tanks on ships and the limitations of the IGC Code, designed for liquefied natural gas, this study introduces a critical assessment procedure to ensure the safety and suitability of such tank designs. This study performed a heat transfer analysis for boil-off gas (BOG) calculations and established separate design load cases to evaluate the yielding and buckling strength. In addition, the study assessed methodologies for both high-cycle and low-cycle fatigue assessments, complemented by comprehensive structural integrity evaluations using finite element analysis. A comprehensive approach was developed to assess the structural integrity of Type C tanks by conducting crack propagation analysis and comparing these results with the IGC Code criteria. The practicality and efficacy of these methods were validated through their application on a 23K-class liquefied hydrogen carrier at the concept design stage. These findings may have important implications for enhancing safety standards and regulatory policies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.839-846
• /
• 1994

This paper presents a simultaneous solution algorithm for one-dimensional unsteady flow routing through a dendritic channel system. This simulations solution algorithm is based on the double-sweep method and utilizes separate recursion equations for continuity, momentum and energy equations for each of the individual components of a dendritic channel system. Through separate recursion equations for each of the components. the new algorithm converts a dendritic channel network problem into a single-channel problem. The new algorithm is utilized in conjunction with a linearized unsteady flow model using full dynamic flow equations. The required computer storage for the coefficient matrix of the whole system is reduced significantly from the $2N{\times}2N$ matrix to a $2N{\times}4$ matrix, where N is the number of cross sections used in the computation of flow variables in a dendritic channel system. The algorithm presented in this paper provides an efficient and accurate modeling of unsteady flow events through a dendritic channel system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.1-9
• /
• 2014

The vast stores of biomass available in the worldwide have the potential to displace significant amounts of petroleum fuels. Fast pyrolysis of biomass is one of several paths by which we can convert biomass to higher value products. The wood pyrolysis oil (WPO) has been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of WPO in a diesel engine requires modifications due to low energy density, high water contents, high acidity, high viscosity, and low cetane number of the WPO. One possible method by which the shortcomings may be circumvented is to co-fire WPO with other petroleum fuels. WPO has poor miscibility with light petroleum fuel oils; the most suitable candidates fuels for direct fuel mixing are methanol or ethanol. Early mixing with methanol or ethanol has the added benefit of significantly improving the storage and handling properties of the WPO. For separate injection co-firing, a WPO-ethanol blended fuel can be fired through diesel pilot injection in a dual-injection dieel engine. In this study, the performance and emission characteristics of a dual-injection diesel engine fuelled with diesel (pilot injection) and WPO-ethanol blend (main injection) were experimentally investigated. Results showed that although stable engine operation was possible with separate injection co-firing, the fuel conversion efficiency was slightly decreased due to high water contents of WPO compare to diesel combustion.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1066-1080
• /
• 2024

SMART100 has a containment pressure and radioactivity suppression system (CPRSS) for passive containment cooling system (PCCS). This prevents overheating and over-pressurization of a containment through direct contact condensation in an in-containment refueling water storage tank (IRWST) and wall condensation in a CPRSS heat exchanger (CHX) in an emergency cool-down tank (ECT). The Korea Atomic Energy Research Institute (KAERI) constructed scaled-down test facilities, SISTA1 and SISTA2, for the thermal-hydraulic validation of the SMART100 CPRSS. Three separate effect tests were performed using SISTA1 to confirm the heat removal characteristics of SMART100 CPRSS. When the low mass flux steam with or without non-condensable gas is released into an IRWST, the conditions for mitigation of the chugging phenomenon were identified, and the physical variables were quantified by the 3D reconstruction method. The local behavior of the non-condensable gas was measured after condensation inside heat exchanger using a traverse system. Stratification of non-condensable gas occurred in large tank of the natural circulation loop. SISTA2 was used to simulate a small break loss-of-coolant accident (SBLCOA) transient. Since the test apparatus was a metal tank, compensations of initial heat transfer to the material and effect of heat loss during long-term operation were important for simulating cooling performance of SMART100 CPRSS. The pressure of SMART100 CPRSS was maintained below the design limit for 3 days even under sufficiently conservative conditions of an SBLOCA transient.