• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.404-405
• /
• 2008

In this work, we investigated the effect of the functionalized SWNT-polymer composites for increasing sensitivity and imparting selectivity to nanotube sensors. To do this, CNT -based gas sensors were fabricated with two types of dispersed SWNT solution involving different polymer resin of TEOS (Tetraethyl orthosilicate) or MTMS (Methyl trimethoxysilane) which is blended to adhere to substrate well. As the surfaces of TEOS and MTMS surrounding SWNTs remain functionalized to -OH and $-CH_3$ groups respectively after hardening, gas adsorption will be affected differently according to the type of gases. In the experiment, we examined the response of electrical conductance for alcohol vapour gas. As the result, the conductance in the sensors using TEOS decreased considerably while that of MTMS was nearly invariable.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.497-498
• /
• 2008

An integrated Mach-Zehnder interferometer for biosensor applications was designed and fabricated. To implement the optimum biosensor a rib waveguide must have single mode operation and high sensitivity. The proposed Mach-Zehnder interferometer was fabricated based on these design rules, and its feasibility is confirmed by ethanol detection experiment in the real-time measurement system operating at 632.8 nm.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.356-361
• /
• 2018

We investigated a hydrogen gas sensor which is available in a high temperature atmosphere. The hydrogen sensors were fabricated into a metal-oxide-semiconductor (MOS) structure made of $Pd/Ta_2O_5/SiC$, and the thin tantalum oxide ($Ta_2O_5$) layer was fabricated by rapid thermal oxidation (RTO). In the experiment, we made three types of sensors with different palladium (Pd) patterns to evaluate the effect of Pd electrode on response characteristics. As the result, the response characteristics in capacitance were improved further when the filled area of the Pd electrode became larger.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.59.6-59
• /
• 2002

$\textbullet$ An experiment for the active vibration control of a cantilever beam is performed. $\textbullet$ An active damping system consisting of a laser sensor and an electromagnetic actuator. $\textbullet$ The design procedure and the performance analysis of an H2 controller for non-collocated systems. $\textbullet$ Simulations and experiments are performed to verify the performances of the controller. $\textbullet$ The optimal H2 controller is designed based on a reduced order model. $\textbullet$The Sensitivity function is introduced to analyze the Spillover phenomenon. $\textbullet$ Active vibration control, Cantilever beam, H2 controller, spillover, Non-collocated system.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.468-472
• /
• 2010

To develop the Exhaust Maniverter(Manifold and converter) it needs to consider flow characteristics related to durability and performance of the catalyst, manufacturability, etc. This paper presents the analysis results regarding to flow characteristics such as flow uniformity, tangential speed, O2 sensor sensitivity and CHT (conjugate heat transfer) for the LCF(Low Cycle Fatigue) for gasoline 2.0 liter engine. The results are satisfactorily corresponded to the general criteria. Also skin temperature and pressure drop wire measured at the Engine Bench. These results can be useful for the design guide for Exhaust Maniverter.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.2
• /
• pp.176-184
• /
• 1996

The paper describes the vibration characteristics of the mechanical system consisting of a uniform Timoshenko beam with a guided mass and an elastic spring support. The free end of the beam does not rotate and the spring attatched to the guided mass is elastically restrained against translation. The guided mass is assumed to be a rigid body having a finite size, but not a mass point as it has been assumed so far. The effect of magnitudes, rotary inertia and the size of the guided mass on the vibration characteristics is fully investigated by the numerical simulation using FEM and experiment. In order to verify the eigenvalue sensitivity for considered system, comparison exact solutions with FEM is conducted, and a good agreement between two solutions is also highlighted.

• Journal of Mechanical Science and Technology
• /
• v.18 no.2
• /
• pp.230-239
• /
• 2004

A compact model approach of a network of spring elements for elastic loading is presented for the thermal deformation analysis of BGA package assembly. High-sensitivity moire interferometry is applied to evaluate and calibrated the model quantitatively. Two ball grid array (BGA) package assemblies are employed for moire experiments. For a package assembly with a small global bending, the spring model can predict the boundary conditions of the critical solder ball excellently well. For a package assembly with a large global bending, however, the relative displacements determined by spring model agree well with that by experiment after accounting for the rigid-body rotation. The shear strain results of the FEM with the input from the calibrated compact spring model agree reasonably well with the experimental data. The results imply that the combined approach of the compact spring model and the local FE analysis is an effective way to predict strains and stresses and to determine solder damage of the critical solder ball.

• The Plant Pathology Journal
• /
• v.16 no.1
• /
• pp.48-51
• /
• 2000

Citrus tristeza virus (CTV) was identified form CTV-infected early satsuma mandarin (Citus unshiu) and yuzu (C.junos) by RT-PCR. The total RNAs were isolated from citrus bark and seaf tissues infected with CTV and reverse transcription was followed with primers designed for amplifying CTV coat protein gene. DNA fragments 738 bp were amplified by RT-PCR and these products were colned for sequence analysis. Based on the sequence analysis, this PCR product has 97% sequence homology to CTV (T-385) CP gene isolated from USA. RT-PCR assay for CTV detection was more sensitivity than ELISA assay which was done with anti-CTV CP antibody. This is the frist report about CTV identification in Cheju island Korea.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.813-819
• /
• 2006

The state of the art for the design of swing ann actuators for optical disc drives is to obtain the high efficient dynamic characteristics, especially for the small size for the mobile information devices, It is affected by the need of consumers who wants the portable digital storage devices maintaining highly functional and removable characteristics of the optical disk drive (ODD). As a necessary consequence, the need of the small form factor (SFF) storage device has been considered as an important part in the information storage technology. In this paper. we suggest a new conceptual miniaturized swing arm type actuator that has high efficient dynamic characteristics as well as satisfies the sensitivity and the heat emission requirements for the SFF-ODD. It also uses a tracking electromagnetic (EM) circuit for a focusing motion. Due to the size constraint, the thermal problem of optical head arises; therefore, we design an efficiently heat emitted structure for the actuator.

• Journal of Ginseng Research
• /
• v.20 no.1
• /
• pp.101-105
• /
• 1996

Several attempts have been made to protect crops against injury from herbicide quinclorac residue in soil. In this experiment, a selection of suitable crops for bioassay of the residue and a reduction of phytotoxicity by treatment with active carbon were carried out to prevent or to counteract the phytotoxicity. Cucumber (Cuumts satims) and kidney bean (Phaseolus Mgaris) were the suitable indicator plant in points of a sensitivity to the herbicide residue and an easy cultivation. The phytotoxicity was able to be observed at 20 and 30 days after seeding on kidney bean and cucumber respectively. In pot trials, application of the active carbon at 50 kg/10a protected effectively the 2-year-old ginseng plant from the injury in a paddy soil where the herbicide had been treated at 3 g a. i./10a.