• 한국전자거래학회지
• /
• 제17권1호
• /
• pp.137-150
• /
• 2012

사회적요구와 기술 개발로 체계적인 개인정보관리와 보안 지침강화에도 불구하고, 개인정보 유출과 침해의 문제는 다양한 형태로 나타나고 있다. 이러한 개인정보를 관리함에 있어, 어떠한 정보를 보호할 것인가 하는 문제는 민감한 핵심 요소이다. 본 논문에서는 개인정보를 구성하는 각 속성정보의 관리 정책을 결정할 기준으로 속성정보의 동적 보안수준 측정법을 제시한다. 동적 보안수준 측정법은 개인정보의 가변적 특성을 측정 요소로 채택한다. 이 기법을 적용함으로, 개인의 각 속성정보 보안수준의 변화에 능동적으로 대처할 수 있는 정보관리 기능을 제공할 수 있다. 이는 기존 정보관리기법의 보안성을 더욱 높일 수 있으며, 통합 ID 관리 시스템이나 전자지갑과 같은 통합 시스템의 보안성 향상에 기여할 것으로 기대된다.

• 전기학회논문지
• /
• 제63권4호
• /
• pp.495-501
• /
• 2014

Piezoresistive-type, capacitive-type, and optical-type sensors have mainly been used for measuring a strain. However, in building a sensor network for remote monitoring using these conventional sensors there are disadvantages such as the complexity of a measuring system including wireless communication circuitry and high cost. In this paper, we demonstrates a highly-sensitive surface acoustic wave (SAW) strain sensor which is advantageous to harsh environments and wireless network. We designed and fabricated the SAW strain sensor. The SAW strain sensor attached on a specimen was tested with a tensile tester. The strain on the sensor surface was measured with a commercial strain gauge and compared with that obtained from strain analysis. The central frequency shift of the SAW sensor was measured with a network analyzer. The sensitivity of the SAW strain sensor is 134 $Hz/{\mu}{\varepsilon}$ which is high compared to previous results.

• Progress in Superconductivity
• /
• 제14권2호
• /
• pp.99-101
• /
• 2012

Fluorescent yield X-ray absorption fine structure (XAFS) spectroscopy is useful for analyzing local structure of specific elements in matrices. We developed an XAFS apparatus with a 100-pixel superconducting tunnel junction (STJ) detector array with a high sensitivity and a high resolution for light-element dopants in wide-gap semiconductors. An STJ detector has a pixel size of $100{\mu}m$ square, and an asymmetric layer structure of Nb(300 nm)-Al(70 nm)/AlOx/Al(70 nm)-Nb(50 nm). The 100-pixel STJ array has an effective area of $1mm^2$. The XAFS apparatus with the STJ array detector was installed in BL-11A of High Energy Accelerator Research Organization, Photon Factory (KEK PF). Fluorescent X-ray spectrum for boron nitride showed that the average energy resolution of the 100-pixels is 12 eV in full width half maximum for the N-K line, and The C-K and N-K lines are separated without peak tail overlap. We analyzed the N dopant atoms implanted into 4H-SiC substrates at a dose of 300 ppm in a 200 nm-thick surface layer. From a comparison between measured X-ray Absorption Near Edge Structure (XANES) spectra and ab initio FEFF calculations, it has been revealed that the N atoms substitute for the C site of the SiC lattice.

• 한국의류산업학회지
• /
• 제14권5호
• /
• pp.730-738
• /
• 2012

This study proposes a process to design and analyze stage costumes by design elements for the costumes of the Korean traditional music cantata 'I Will Rise'. This study states fundamental references to make costumes of similar performances in the future and develop costume designs based on the format of a play. The findings are as follows. First, the costume production process of 'I Will Rise' is conducted in the order of directing intentions and script analysis, costume design, miniature production, costume production, costume modification, run, and post-production. Second, an overall Korean silhouette is expressed through the creation of costumes based on the construction of Korean traditional clothing (hanbok); however, from a detail perspective, a modernistic sensitivity is expressed through the use of modern elements (wing shoulders attached to shoulders, narrow ribbons made in a string form, and wristlets and belts) not found in hanboks. Third, tie-dying is applied to the costume colors of each character to highlight the traditional and unique feeling of dye and symbolic colors that effectively represent each role used to communicate the storyline and character emotions to the audience. Fourth, materials for costumes are cotton and linen (frequently used to create the texture of a Hanbok) as the costume of each character is emphasized to the use of additional and detailed materials such as artificial leather, hemp, and silk.

• 대한전자공학회논문지
• /
• 제11권6호
• /
• pp.44-49
• /
• 1974

종래부터 사용되어 오고 있는 Reactance 변조방식에 가변 Reactance 소자로 VVC Diode를 다단으로 사용한 위상변조방식과 수정발진자와 λ/4 결합회로를 통하여 VVC Diode를 사용한 수정주파수변조 방식을 간단히 소개하고 실용적인 관점에서 FM 변조기로서의 제반특성을 두가지 변조방식에서 상호비교하였다. 특히 VVC Diode를 사용한 Reactance 변조방식에 있어서 변조감도를 높이기 위하여 다단변조를 하였을 때의 발생하는 고조파련에 관하여 상세히 고찰하여 본 결과 중심주파수의 안정도가 -40℃까지의 넓은 온도 범위에 걸쳐서 요구될 때는 다단위상변조방식을 택하여 변조도가 깊지 않는데서 체배하여서 소요의 편이를 얻는 것이 좋다는 것을 확인하여서 이를 차륜용무전기에 실용화하였다. 한편 VVC Dicde를 사용한 수정각파수변조기는 -20℃까지의 중심주파수 안정도를 요하나 변조감도가 높고 소형으로 유리하다는 점에서 휴대용무전기에 실용화하여서 좋은 결과를 얻었다.

• Advances in aircraft and spacecraft science
• /
• 제5권4호
• /
• pp.499-513
• /
• 2018

One of the major problems in glass fiber reinforced epoxy (GFRE) composite pipes is the durability under water absorption. This condition is generally recognized to cause degradations in strength and mechanical properties. Therefore, there is a need for an intelligent system for detecting the absorption rate and computing the mass of water absorption (M%) as a function of absorption time (t). The present work represents a new non-destructive evaluation (NDE) technique for detecting the water absorption rate by evaluating the dielectric properties of glass fiber and epoxy resin composite pipes subjected to internal hydrostatic pressure at room temperature. The variation in the dielectric signatures is employed to design an electrical capacitance sensor (ECS) with high sensitivity to detect such defects. ECS consists of twelve electrodes mounted on the outer surface of the pipe. Radius-electrode ratio is defined as the ratio of inner and outer radius of pipe. A finite element (FE) simulation model is developed to measure the capacitance values and node potential distribution of ECS electrodes on the basis of water absorption rate in the pipe material as a function of absorption time. The arrangements for positioning12-electrode sensor parameters such as capacitance, capacitance change and change rate of capacitance are analyzed by ANSYS and MATLAB to plot the mass of water absorption curve against absorption time (t). An analytical model based on a Fickian diffusion model is conducted to predict the saturation level of water absorption ($M_S$) from the obtained mass of water absorption curve. The FE results are in excellent agreement with the analytical results and experimental results available in the literature, thus, validating the accuracy and reliability of the proposed expert system.

• 한국도로학회논문집
• /
• 제10권2호
• /
• pp.145-157
• /
• 2008

하중전달효율은 다웰이 설치되었거나 설치되지 않은 콘크리트포장 줄눈의 구조적 성능을 나타내기 위해 사용된다. ABAQUS 소프트웨어를 사용한 줄눈 콘크리트장의 3차원 모형이 본 연구를 통하여 구축되었다. 기층과 노상이 접착되어 구성된 하부층 위에 3개의 슬래브가 놓였으며, 스프링 요소를 사용하여 인접한 슬래브를 줄눈에서 연결하였다. 콘크리트포장의 다양한 줄눈강성을 모사하기 위하여 다양한 값의 스프링 상수를 입력값으로 사용하여 그 관계를 조사하였으며, 스프링 상수가 커질수록 줄눈의 하중전달효율이 증가하는 것으로 나타났다. 슬래브와 기증의 다양한 탄성계수와 두께를 사용하여 슬래브의 거동과 하중전달효율에 미치는 재료물성과 기하학적 형상의 영향을 분석하였다. 그 결과 노상의 탄성계수는 기층의 탄성계수와 슬래브 및 기층의 두께보다 더 큰 영향을 미치는 것으로 나타났다. 또한 양 또는 영의 온도구배에서보다는 음의 온도구배에서 슬래브의 거동과 하중 전단효율이 더 민감 하게 변화하였으며, 낮은 강성의 줄눈은 슬래브의 온도구배에 더 민감한 것으로 나타났다.

• Journal of Radiation Protection and Research
• /
• 제18권1호
• /
• pp.71-82
• /
• 1993

원자력 발전소 작업과의 피폭량은 발전소의 안전 운영에 관한 척도일 뿐 아니라, 일반 대중이 원자력 발전의 안전을 평가하는 기본 요소이다. 또한, 최근 ICRP 60에 의한 개인 피폭선량 한도의 하향조정 권고는 지속적인 피폭저감에의 노력을 요구하고 있다. 본 논문에서는 작업자의 피폭저감에 관한 대안선정시 사용할 수 있는 최적화 기법을 제시하고 실제로 원전 운영자예 의해 제안된 대안들을 검토하는데 이 기법을 적용하여 보았다. 분석과정에서 기본분석이외에 가변 경제변수를 고려한 민감도 분석을 통해 계산 결과의 불확실성을 보완하였다. 분석결과를 살펴보면, 먼저 비용-이득 분석에서는 '증기 발생기 Nozzle Dam 및 Torquing Machine'이 총 이득면에서 가장 우수한 것으로 평가되었고, 다속성 효용 분석의 경우 'Co-No Seal 조임장치'가 가장 높은 효용을 가진 것으로 나타나 약간의 차이를 보이고 있다. 따라서, 최적화 기법의 적용시에는 두 가지이상의 정량적 기법을 보완적으로 사용하고, 정성적 인자도 충분히 고려하는 것이 필요하다.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1107-1113
• /
• 2002

This study presents the hydrogen emblittlement in the metal, which decreases the ductility and then induces the brittle fracture. The contribution deals with the effect of strain rate and notch geometry on hydrogen emblittlement of 1.25Cr-0.5Mo and 2.25Cr-1Mo steels, which are in use at high pressure vessel. Smooth and notched specimens were examined to obtain the elongation and tensile strength. For charging the hydrogen in the metal, the cathodic electrolytic method was used. In this process, current density is maintained constant. The amount of hydrogen penetrated in the specimen was detected by the hydrogen determenator(LECO RH404) with the various charging time. The distribution of hydrogen concentration penetrated in the specimen was obtained by finite element analysis. The amount of hydrogen is high in smooth specimen and tends to concentrate in the vicinity of surface. The elongation and tensile strength decreased with the passage of charging time in 1.25Cr-0.5Mo and 2.25Cr-1Mo steels. The elongation increased and tensile strength decreased as strain rate increased. As a result of this study, it is supposed that 1.25Cr-0.5Mo steel is more sensitive than 2.25Cr-lMo steel in hydrogen embrittlement. Hydrogen embrittlement susceptibility of notched specimen after hydrogen charging is more remarkable than that of smooth specimen.

• Parasites, Hosts and Diseases
• /
• 제55권6호
• /
• pp.607-611
• /
• 2017

Primary maternal infection with toxoplasmosis during pregnancy is frequently associated with transplacental transmission of the parasite to the fetus. This study was conducted to test the utility of PCR assay to detect recent infections with Toxoplasma in aborted women at various gestational ages who referred to Obstetrics and Gynecology Department of Alavi Hospital in Ardabil during 2014 and 2016. Two hundred women with a history of single or repeated abortion were investigated in this study. Blood samples were tested for specific anti-Toxoplasma IgM and IgG antibodies by ELISA. According to the results, 53.5% of the women under study were positive for anti-Toxoplasma antibodies: 4.0% of them had IgM, 43.0% had IgG, and 6.5% had both IgM and IgG. Subsequently, Nested-PCR analysis was used to detect T. gondii DNA in the placenta of subjects. In 10.5% of the women, the results were positive for 529 bp element of T. gondii. Among them, 5 (23.8%) cases were IgM positive, 1 (4.8%) case was IgG positive, and 11 (52.4%) were both IgM and IgG positive. In 4 (19.0%) patients, none of the antibodies were found to be positive. In total, 16 patients had positive results in both ELISA and PCR methods, and 174 cases had negative results for new infection. The findings of this study revealed that T. gondii might be one of the significant factors leading to abortion, and that the analysis of placenta can be important in order to achieve increased detection sensitivity.