• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.409-414
• /
• 2003

This paper develops a relatively comprehensive and sophisticated constitutive model of concrete for finite element analysis of concrete structures. The present model accounts for the hydrostatic pressure sensitivity and Lode angle dependence behavior of concrete, not only in its strength criterion, but also in its hardening characteristics. The implementation is carried out through incorporating the developed concrete model in User Subroutine Material(UMAT) of the general-purpose FE program ABAQUS(v.5.8). It is found that the model can sufficiently predict the hardening as well as the softening behaviour of concrete under high confining pressure.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.987-993
• /
• 2001

In this paper, we presents the construction details and output characteristics of a thick film piezoresistive strain gage. The thick film was printed on the ceramic diaphragm back side by screen printing and cured at 850$^{\circ}C$. The strain distribution and deflection on ceramic diaphragm were performed with finite-element method(FEM tool ANSYS-5.3). Various thick film strain gage characteristics were analysed, including nonlinearity, hysteresis, stability and sensitivity of thick film strain gages.

• 대한의용생체공학회:의공학회지
• /
• 제10권2호
• /
• pp.102-105
• /
• 1989

In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research.

• 대한전기학회논문지
• /
• 제39권11호
• /
• pp.1146-1152
• /
• 1990

Direct calculation algorithm for the nonzero elements of system matrix is suggested for a single machine connected to the infinite bus. Excitation system and power system stabilizer are included. When the system matrix is partitioned into 15 nonzero blocks, we can identify the location of nonzero elements and formula for each element. No matrix inversion and multiplication are necessary. Sensitivity coefficients with respect to controller parameters are suggested based on the structure of system matrix.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.1020-1026
• /
• 1994

This paper presents a technique to optimize the shape of waveguide components in H-plane. The technique utilizes the numerical optimization process which employs the vector finite element method. In the optimization process, the sensitivity of an objective function with respect to design variables is computed by introducting adjoint variables, which makes the computation easy. The steepest descent method is then employed to update design variables. As a numerical example, an H-plane waveguide teejunction was considered to obtain optimized shape. Comparison between the initial and optimized shape was made.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.181-183
• /
• 1997

In this paper the analysis and optimum design of ceramic insulator is studied. The finite element method (FEM) is used for the electromagnetic solution and the design sensitivity analysis is used for the optimization. The parameterization of design variables and movable points is introduced and the linear function is used as a interpolation function.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1863-1866
• /
• 2002

This paper describes synthesis of a complex R$^{i}$ CR filter with a finite transmission zero except zero frequency. First, a new kernel function is proposed. Secondly, how to determine the element values included in the R$^{i}$ CR filter is described. A fifth-order R$^{i}$ CR filter is designed. Finally, the sensitivity property of the proposed filter is evaluated through computer simulation.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1997년도 춘계 학술대회 발표집
• /
• pp.124-127
• /
• 1997

A key element in the control of Automated Guided Vehicle Systems (AGVS) is dispatching policy. This paper proposes a new dispatching algorithm for an efficient operation of AGVS. Based on an evolutionary operation, it has an adaptive control capability responding to changes of the system environment. The performance of the algorithm is compared with some well-known dispatching rules in terms of the system throughput through simulation. Sensitivity analysis is carried out varying the buffer capacity and the number of AGVS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.791-793
• /
• 1993

The hall sensor is current detector using hall effect in semiconductor and the conventional type detect current with concentrating flux by current of conductor. So, detection of small current is very difficult because of residual magnetism. This paper give the experiments based results about method that detect the small DC current using minimizing the residual of hall element by magnetic modulation and concentrating flux. The suggested sensor can dector small current better than the conventional that.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.104-109
• /
• 1996

Continuum element sensitivity analysis (CONTESA) and system optimization (SYSOPT) for Noise, Vibration, and Harshness (NVH) have been developed and applied to automobile structures for sizing, topology, and configuration design using Mindlin plate and Timoshenko beam theories. The topology optimization has been developed using the density approach, sequential linear programming, and the adjoint variable method. CONTESA has been tested using various vehicle models. Optimized vehicles using CONTESA and SYSOPT are manufactured to validate the simulation-based design methodology.