• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.19-22
• /
• 1990

In order to optimize systematically the shape of electromagnetic devices, two sensitivity analyses, one based on finite element method and the other based on variational formulae and material derivative in continuum mechanics, are proposed. These are applied to eddy current problem of time-varying field and verified these usefulness.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.54-56
• /
• 1993

A systematic procedure for determining the elements of system state matrix is suggested. The interrelation of submatrices of the system matrix is investigated. Each element or each block can be represented in algebraic form. These results can be applied in the eigenvalue sensitivity analysis with respect to the changes in controller parameters.

• Biomedical Science Letters
• /
• v.13 no.1
• /
• pp.33-38
• /
• 2007

The aim of this work was to validate a rapid and an accurate method for detecting Mycobacterium leprae in clinical specimens using nested PCR targeting M. leprae-specific repetitive element (RLEP) sequence. The primers were derived from the RLEP sequence which yield a 272 bp outer product and a 230 bp inner product. The specificity and the sensitivity of the nested PCR were compared with those of single PCR for detecting M. leprae using DNAs isolated from reference strain and various species of Mycobacterium. The results showed that the sensitivity of the nested PCR was about 100 to 1,000 times higher than that of the single PCR and also showed that both the single and the nested PCR were highly specific to M. leprae. Subsequently, the usefulness of the single and nested PCR was evaluated with clinical samples isolated from leprosy patients. The number of positive detections by the single and the nested PCR with a total of 20 specimens from leprosy patients were 9 (45%) and 20 (100%), respectively. The results clearly showed that nested PCR has highest sensitivity in detecting M. leprae from clinical specimens. Therefore, nested primers targeting RLEP sequence developed in this study seems to be useful to detect the presence of M. leprae.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.673-677
• /
• 2004

The sensitivities of eigenvalues to the change of element thickness have been calculated for beams in the paper. For a cantilever beam the sensitivities fluctuate more for higher modes. When the thickness of the element near the fixed end increases, the eigenvalues for all modes increase. On the other hand, increasing of the thickness of the element at the tip decreases the eigenvalues for all modes. For a simply supported beam the sensitivities fluctuate more for higher modes, which is the same phenomenon as for a cantilever beam. The sensitivities are always positive for all modes

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.1 s.118
• /
• pp.80-87
• /
• 2007

In this paper, a method for identifying the location and extent of a damage in a structure using residual forces was presented. Element stiffness matrix reduction parameters in a finite element model were used to describe the damaged structure mathematically. The element stiffness matrix reduction parameters were determined by minimizing a global error derived from dynamic residual vectors, which were obtained by introducing a simulated experimental data into the eigenvalue problem. Genetic algorithm was used to get the solution set of element stiffness reduction parameters. The proposed scheme was verified using Euler-Bernoulli beam. The results were presented in the form of tables and charts.

• Coupled systems mechanics
• /
• v.4 no.3
• /
• pp.211-235
• /
• 2015

In this work we present a one-dimensional damage model capable of representing the dynamic fracture for elastodamage bar with combined hardening in fracture process zone - FPZ and softening with embedded strong discontinuities. This model is compared with another one we recently introduced (Do et al. 2015) and it shows a good agreement between two models. Namely, it is indicated that strain-softening leads to a sensitivity of results on the mesh discretization. Strain tends to localization in a single element which is the smallest possible area in the finite element simulations. The strain-softening element in the middle of the bar undergoes intense deformation. Strain increases with increasing mesh refinement. Strain in elements outside the strain-softening element gradually decreases to zero.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.569-576
• /
• 2003

Fundamental issues in static finite element analysis of reinforced concrete panel subjected to biaxial tensile loads are discussed. This paper is trying to bring our attention to the appropriate use of concrete material models such as cracking criteria, tension stiffening model and the steel models which are basically used in the nonlinear finite element analysis of reinforced concrete panels. We mainly investigate the sensitivity of available material models and finite element technologies to the finite element analysis result using our recent reinforced concrete panel experiment result. Throughout this study, we found that the judicious use of the material models and finite element technologies with the sound understanding of structural characteristics can only guarantee the accurate prediction of panel behaviour.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1032-1039
• /
• 2001

In this paper, modal analysis of wind-power generator rotor system was performed by using finite element method. Experimental modal analysis of generator rotor system was performed and the result were compared with analytical ones. Sensitivity method and localized modification method were used to update finite element model. As a result of updating finite element model, errors of natural freguency were reduced within 0.5％ and MAC value was improved near by l. Stability characteristics of wind-power generator rotor-bearing system through harmonic analysis about several external force will be analyzed using finite element model.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.2
• /
• pp.163-170
• /
• 2023

Since spent nuclear fuel assemblies (SFA) are transported to interim storage or final disposal facility after cooling the decay heat, finite element analysis (FEA) with simplification is widely used to show their integrity against cladding failure to cause dispersal of radioactive material. However, there is a lack of research addressing the comprehensive impact of shape and element simplification on analysis results. In this study, for the optimization of a typical pressurized water reactor SFA, different types of finite element models were generated by changing number of fuel rods, fuel rod element type and assembly length. A series of FEA in use of these different models were conducted under a shock load data obtained from surrogate fuel assembly transportation test. Effects of number of fuel rods, element type and length of assembly were also analyzed, which shows that the element type of fuel rod mainly affected on cladding strain. Finally, an optimal finite element model was determined for other practical application in the future.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.497-504
• /
• 2012

Finite element analysis is to approximate a geometry model developed in computer-aided design(CAD) to a finite element model, thus the conventional shape design sensitivity analysis and optimization using the finite element method have some difficulties in the parameterization of geometry. However, isogeometric analysis is to build a geometry model and directly use the functions describing the geometry in analysis. Therefore, the geometric properties can be embedded in the NURBS basis functions and control points so that it has potential capability to overcome the aforementioned difficulties. In this study, the isogeometric structural analysis and shape design sensitivity analysis in the generalized curvilinear coordinate(GCC) systems are discussed for the curved geometry. Representing the higher order geometric information, such as normal, tangent and curvature, yields the isogeometric approach to be the best way for generating exact GCC systems from a given CAD geometry. The developed GCC isogeometric structural analysis and shape design sensitivity analysis are verified to show better accuracy and faster convergency by comparing with the results obtained from the conventional isogeometric method.