• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.E1
• /
• pp.24-31
• /
• 2008

In this study, a new PM (particulate matter) sampler was developed and fabricated to collect fine particles in the atmosphere, and laboratory and field tests were carried out to evaluate the performance of the sampler. The PM sampler, which was based on impingers, employed an aerosol condensation system as a PM magnifier to improve its collection efficiencies. Sodium chloride, ammonium sulfate and ammonium nitrate aerosols were used as test particles, because these components are rich in ambient aerosols. As a result, it was found that the collection efficiency of the novel PM sampler was very high. Thus, it is believed that the PM sampler is an effective device for sampling fine particles. In addition, it was demonstrated that this work could contribute to the collection or removal of fine particles and be applied to the semicontinuous sampling of ambient aerosols for chemical composition analysis.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.2
• /
• pp.90-97
• /
• 2000

This paper describes an speaker-adaptive speech recognition system which make a reliable recognition of speech signal for new speakers. In the Proposed method, an speech spectrum of new speaker is adapted to the reference speech spectrum by using Parameters of a 1st linear transformation network at the front of phoneme classification neural network. And the recognition system is based on semicontinuous HMM(hidden markov model) which use the multilayer perceptron as a fuzzy vector quantizer. The experiments on the isolated word recognition are performed to show the recognition rate of the recognition system. In the case of speaker adaptation recognition, the recognition rate show significant improvement for the unadapted recognition system.

• Steel and Composite Structures
• /
• v.1 no.1
• /
• pp.1-16
• /
• 2001

Due to aesthetic, economic, and structural performance, the use of structural hollow sections as columns in both continuous moment resisting and nominally pinned construction is attractive. Connecting the beams to these sections is somewhat problematic as there is no access to the interior of the section to allow for the tightening of a standard bolt. Therefore, bolts that may be tightened from one side, i.e., blind bolts, have been developed to facilitate the use of site bolting for this arrangement. This paper critically reviews available information concerning blind bolting technology, especially the performance of fasteners in shear, tension, and moment resisting connections. Also provided is an explanation of the way in which the results have been incorporated into design guidance covering the particular case of nominally pinned connections. For moment resisting connections, it is concluded that whilst the principle has been adequately demonstrated, sufficient data are currently not available to permit the provision of authoritative design guidance. In addition, inherent flexibilities in the connections mean that performance equivalent to full strength and rigid is unlikely to be achievable: a semicontinuous approach to frame design will therefore be necessary.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.2
• /
• pp.190-201
• /
• 2010

Fine particulate matter < $1.8{\mu}m$ was collected as a slurry using the Semicontinuous Elements in Aerosol Sampler with time resolution of 30-min between May 23 and 27, 2002 at the Sydney Supersite, Florida, USA. Concentrations of 11 elements, i.e., Al, As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Se, and Zn, in the collected slurry samples were determined off-line by simultaneous multi-element graphite furnace atomic absorption spectrometry. Temporal profiles of $SO_2$ and elemental concentrations combined with meteorological parameters such as wind direction and wind speed indicate that some transient events in their concentrations are highly correlated with the periods when the plume from an animal feed supplement processing facility influenced the Sydney sampling site. The peaking concentrations of the elemental species during the transient events varied clearly as the plume intensity varied, but the relative concentrations for As, Cr, Pb, and Zn with respect to Cd showed almost consistent values. During the transient events, metal concentrations increased by factors of >10~100 due to the influence of consistent plumes from an individual stationary source. Also the multi-variate air dispersion receptor model, which was previously developed by Park et al. (2005), was applied to ambient $SO_2$ and 8 elements (Al, As, Cd, Cr, Cu, Fe, Pb, and Zn) measurements between 20:00 May 23 and 09:30 May 24 when winds blew from between 70 and $85^{\circ}$, in which animal feed processing plant is situated, to determine emission and ambient source contributions rates of $SO_2$ and elements from one animal feed processing plant. Agreement between observed and predicted $SO_2$ concentrations was excellent (R of 0.99; and their ratio, $1.09{\pm}0.35$) when one emission source was used in the model. Average ratios of observed and predicted concentrations for As, Cd, Cr, Pb, and Zn varied from $0.83{\pm}0.26$ for Pb to $1.12{\pm}0.53$ for Cd.

• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.588-596
• /
• 1992

The fermentation characteristics of ethanol production by the use of immobilized Zymomonas mobilis KCTC 1534 cells were investigated in terms of formation factors such as substrate and product concentration. In batch fermentation, the maximum values of specific ethanol productivity, specific substrate uptake rate, ethanol yield, and glucose conversion rate were $29.14g/{\ell}{\cdot}h$, $60.24g/{\ell}{\cdot}h$, 0.48g/g, and 98.4%, respectively, with 17% glucose medium, and its ethanol productivity was $2.91g/{\ell}{\cdot}h$ in the case of 25 hour fermentation time. Repeated batch fermentation was possible for 30 days with 2.24-$2.94g/{\ell}{\cdot}h$ ethanol productivity. In semicontinuous fermentation, the maximum ethanol productivity was shown to be $15.7g/{\ell}{\cdot}h$ at $0.36h^{-1}$ effective dilution rate with 17% glucose concentration. In this case, ethanol yield coefficient and glucose conversion rate were 0.39 g/g, 64.7%, respectively.

• Microbiology and Biotechnology Letters
• /
• v.13 no.3
• /
• pp.273-278
• /
• 1985

A carrier-supported mycelial growth of Penicillium chrysogenum was applied to penicillin fermentation system. Among various materials tested, celite was found to be most effective for both spore adsorption and bioparticle development. Hyphal growth through pore matrices of the material showed strong anchorages and provided highly stable biofilm growths. When 5-10％ celite was employed, both cell growth and penicillin production were observed to increase significantly comparing to the dispersed filamentous growth. Specific productivity of penicillin, however. was found to be kept almost constant at a value of 1,900 unit/g cell/hr. A semicontinuous fermentation in a fluidized-bed reactor. using the tarrier-supported biofilm growth, was conducted successfully although free mycelia appeared in the late phase of the fermentation made the reactor operation difficult. Control of the size of bioparticles was considered as a major operating factor to maintain the reactor productivity at a desired level.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.367-370
• /
• 2003

This study was carried out to investigate the possibility for reuse of solid organic wastes such as saccharified newspapers and boxes by two-phase anaerobic fermentation system. When 15g of newspaper and box wastes were digested for 24 days by batch fermentation, tCOD removal rate were found to be 60.9 and 62.4%, respectively. During this period, the amounts of biogas produced were 6.95 and 6.43L. The removal efficiencies of total solid were 34.8 and 33.4%, and those of volatile solid were 40.0 and 39.2%, respectively. That pH was around 7.5 after 20-days operation means methane fermentation is well advanced. In case of semicontinuous reaction, tCOD removal efficiencies of newspaper and box wastes were 64.7 and 65.0%, respectively for 14-days operation. It has been shown that each of the average biogas amounts produced after 25 days operation (stabilization stage for methane fermentation) was 0.31 and 0.30L/g dry wt./day, respectively, and each methane contents was 57.3 and 56.2%, respectively. After the reaction continued for 25 days, pHs in the anaerobic acidogenic and methanogenic fermenters were shown to be 5.0 and 7.5, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.2
• /
• pp.217-222
• /
• 1999

A squid viscera oil contains a high content of EPA, DHA, and other valuable polyunsaturated fatty acids. The extractions of squid viscera oil by supercritical carbon dioxide both with/without $3\%$ (v/v) ethanol were performed in a semicontinuous flow extractor at 8.3 to 13.8 MPa and 25 to $50^{\circ}C$. When ethanol was added to $SC-CO_2$, the extraction ratio of lipid increased. The extracts contained high content of unsaturated oils like DHA and EPA. The highest extraction yield of lipid from squid viscera oil extracted by supercritical carbon dioxide was obtained at 12.4 MPa and $40^{\circ}C$ with/without entrainer. The main fatty acids of squid viscera oil extracted by supercritical carbon dioxide were myristric acid (14:0), palmitic acid (16:0), palmitoleic acid (16:1), oleic acid (18:1), arachidic acid (20:0), eicosapentaenoic acid (20:5), and docosahaxaenoic acid (22:6).

• KSBB Journal
• /
• v.18 no.4
• /
• pp.318-323
• /
• 2003

This study was carried out to investigate the possibility of reusing newspaper or paperbox waste by methane fermentation. When 15 g of newspaper and box wastes were digested separately for 24 days by batch fermentation, the amount of total organic acids produced were 2461 and 4978 mg/L, respectively. The tCOD removal rates were found to be 60.9 and 62.4%, respectively. In addition, the removal efficiencies of total solid were 34.8 and 33.4%, and those of volatile solid were 40.0 and 39.2%, respectively. During this period, the amounts of biogas produced were 6.95 and 6.43 L. In a semicontinuous reaction, tCOD removal efficiencies for newspaper and box wastes were 64.7 and 65.0%, respectively, after 14 days of digestion. After 25 days, which were needed to stabilize the methane fermentation, the amounts of biogas produced daily were 0.31 and 0.30 L/g.dry wt, respectively. Methane contents were 57.3 and 56.2%, respectively, and the pHs in the anaerobic acidogenic and methanogenic fermenters were 5.0 and 7.5, respectively.