DOI QR코드

DOI QR Code

The practice of blind bolting connections to structural hollow sections: A review

  • Barnett, T.C. (School of Civil Engineering, The University of Nottingham) ;
  • Tizani, W. (School of Civil Engineering, The University of Nottingham) ;
  • Nethercot, D.A. (Department of Civil and Environmental Engineering, Imperial College of Science, Technology and Medicine)
  • Published : 2001.03.25

Abstract

Due to aesthetic, economic, and structural performance, the use of structural hollow sections as columns in both continuous moment resisting and nominally pinned construction is attractive. Connecting the beams to these sections is somewhat problematic as there is no access to the interior of the section to allow for the tightening of a standard bolt. Therefore, bolts that may be tightened from one side, i.e., blind bolts, have been developed to facilitate the use of site bolting for this arrangement. This paper critically reviews available information concerning blind bolting technology, especially the performance of fasteners in shear, tension, and moment resisting connections. Also provided is an explanation of the way in which the results have been incorporated into design guidance covering the particular case of nominally pinned connections. For moment resisting connections, it is concluded that whilst the principle has been adequately demonstrated, sufficient data are currently not available to permit the provision of authoritative design guidance. In addition, inherent flexibilities in the connections mean that performance equivalent to full strength and rigid is unlikely to be achievable: a semicontinuous approach to frame design will therefore be necessary.

Keywords

References

  1. Ballerini, M., Piazza, M., Bozzo, M., and Occhi, F. (1995), "The flowdrill system for the bolted connection of steel hollow sections. Part II: Experimental results and design evaluations for shear connections", Costruzioni Metalliche, No. 5.
  2. Banks, G. (1997a), "Hollobolt joint shear tests project No. S2860", Memo 146/RJ, British Steel Plc., Swinden Technology Centre, Rotherham.
  3. Banks, G. (1997b), "Hollobolt joint shear tests", Memo 129, British Steel Plc., Swinden Technology Centre, Rotherham.
  4. British Steel Tubes and Pipes (1996), "Hollofast and hollobolt system for hollow section connections", CIDECT Report No. 6G-14(A)/96.
  5. British Standards Institution (1995), "Structural use of steelwork in building, part I: code of practice for design simple and continuous construction: Hot rolled sections", London, BS 5950.
  6. British Steel Tubes and Pipes (1997), "SHS Jointing: flowdrill and Hollobolt", Corby.
  7. CIDECT, J., A., Packer, J., Wardenier, Y., Kurobane, D., Dutta and N., Yeomans, (1992), Design Guide for Rectangular Hollow Section (RHS) Joints under Predominantly Static Loading, Guide No. C03.
  8. Dawe, J.L. and Grondin, G.Y. (1990), "W-shaped beam to RHS column connections", Can. J. Civ., Engrg., 17(3), 788-797. https://doi.org/10.1139/l90-091
  9. Eurocode 3. (1992), Design of Steel Structures. Part 1.1 General Rules and Rules for Buildings, DD ENV 1993-1-1.
  10. France, J.E., Davison, J.B. and Kirby, P.A. (1999), "Strength and rotational response of moment connections to tubular columns using flowdrill connectors", J. Construct. Steel Res., 50, 1-14. https://doi.org/10.1016/S0143-974X(98)00235-1
  11. Hasan, R., Kishi, N., Chen, W.F. and Komuro, M. (1997), "Evaluation of rigidity of extended end-plate connections", J. Struct. Engrg., ASCE, 123(12), 1595-1602. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:12(1595)
  12. Industrial Fastening Systems (1990), Huck International Inc. Irvine, California.
  13. Korol, R.M., Ghobarah, A. and Mourad, S. (1993), "Blind bolting W-shape beams to HSS columns", J. Struct. Engrg. ASCE, 119(12), 3463-3481. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:12(3463)
  14. Maquoi, R., Navean, X. and Rondal, J. (1984), "Beam-column welded stud connections", J. Construct. Steel Res, 3, 3-26.
  15. Nethercot, D., Li, T. Q. and Ahmed, B. (1998), "Unified classification system for beam to column connections", J. Construct. Steel Res, 45, 39-65. https://doi.org/10.1016/S0143-974X(97)00064-3
  16. Occhi, F. (1995), "Hollow section connections using (Hollofast) hollobolt expansion bolting", Second Interim Report 6G-16/95, Sidercad, Italy.
  17. Owens, G.W. and Cheal, B.D. (1989), Structural Steelwork Connections, Butterworths, Sevenoaks.
  18. Picard, A. and Giroux, Y. (1977), "Rigid connections for tubular columns", Can. J. Civ., Engrg., 4(2), 134-144. https://doi.org/10.1139/l77-018
  19. Steel Construction Institute (1991), Joints in Simple Construction: Volume 1: Design Methods, BCSA/SCI, Ascot.
  20. Steel Construction Institute (1995), Joints in Steel Construction: Moment Connections, BCSA/SCI, Ascot.
  21. Tabuchi, M., Kanatani, H. and Kamba, T. (1988), "Behaviour of tubular column to H- beam connections under seismic loading", Proceedings of the Ninth World Conference On Earthquake Engrg., 4, 181-186.
  22. Yeomans, N. (1998), "Rectangular hollow section column connections using the Lindapter Hollobolt", Proceedings of 8th International Symposium on Tubular Structures, Singapore.

Cited by

  1. Bolted connections to tubular columns at ambient and elevated temperatures - A review vol.21, pp.2, 2016, https://doi.org/10.12989/scs.2016.21.2.303
  2. Limit load analysis for fracture prediction in high-performance steel bridge members vol.2, pp.4, 2006, https://doi.org/10.1080/15732480601103531
  3. Fatigue reliability analysis for the crack propagation compared with LRFD specification vol.10, pp.1, 2010, https://doi.org/10.1007/BF03249510
  4. Experimental investigation of extended end plate joints to concrete-filled steel tubular columns vol.79, 2012, https://doi.org/10.1016/j.jcsr.2012.07.016
  5. Fatigue strength evaluation of welded structural details in corrugated steel web girders vol.13, pp.4, 2013, https://doi.org/10.1007/s13296-013-4012-z
  6. Blind-bolted shear connections for axially compressed RHS columns strengthened with open sections vol.127, 2016, https://doi.org/10.1016/j.jcsr.2016.07.023
  7. Composite actions within steel-FRP composite beam systems with novel blind bolt shear connections vol.138, 2017, https://doi.org/10.1016/j.engstruct.2017.01.068
  8. Tying resistance of reverse channel connection to concrete filled square and rectangular tubular sections vol.100, 2015, https://doi.org/10.1016/j.engstruct.2015.05.027
  9. Behaviour of open beam-to-tubular column angle connections under combined loading conditions vol.16, pp.2, 2014, https://doi.org/10.12989/scs.2014.16.2.157
  10. Test of extended thick-walled through-diaphragm connection to thick-walled CFT column vol.20, pp.1, 2016, https://doi.org/10.12989/scs.2016.20.1.001
  11. Connections in tubular structures vol.4, pp.1, 2002, https://doi.org/10.1002/pse.102
  12. Seismic Behaviour of Semi-Rigid Joints to Concrete Filled Steel Tubular Columns vol.400-402, pp.1662-9795, 2008, https://doi.org/10.4028/www.scientific.net/KEM.400-402.693
  13. Fatigue Performance of Blind Bolt in Concrete-Filled Hollow Section vol.421, pp.1662-7482, 2013, https://doi.org/10.4028/www.scientific.net/AMM.421.762
  14. Effect of Loading Frequency on Fatigue Life of Extended Hollobolt in Concrete Filled Hollow Section vol.1025-1026, pp.1662-8985, 2014, https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.950
  15. Behaviour of flush end plate joints to concrete-filled steel tubular columns vol.65, pp.4, 2009, https://doi.org/10.1016/j.jcsr.2008.10.010
  16. Semi-rigid connection modeling for steel frameworks vol.35, pp.4, 2001, https://doi.org/10.12989/sem.2010.35.4.431
  17. Cyclic behavior of endplate connections to tubular columns with novel slip-critical blind bolts vol.148, pp.None, 2001, https://doi.org/10.1016/j.engstruct.2017.07.015
  18. Progressive collapse behaviour of endplate connections to cold-formed tubular column with novel Slip-Critical Blind Bolts vol.131, pp.None, 2018, https://doi.org/10.1016/j.tws.2018.07.012
  19. Progressive collapse behaviour of extended endplate connection to square hollow column via blind Hollo-Bolts vol.131, pp.None, 2018, https://doi.org/10.1016/j.tws.2018.07.043
  20. Structural Performance of a New Blind-Bolted Frame Modular Beam-Column Connection under Lateral Loading vol.9, pp.9, 2019, https://doi.org/10.3390/app9091929
  21. Reinforcement Analysis of Rigid Hangers for Existing Old Arch Bridges: A Case Study of Ling Bridge vol.19, pp.6, 2019, https://doi.org/10.1007/s13296-019-00242-2
  22. Analysis of EHB Joints to Concrete‐filled Steel Columns: Combined Failure in Tension vol.4, pp.2, 2001, https://doi.org/10.1002/cepa.1276
  23. Cyclic behaviour of a novel steel beam-to-prefabricated CFST column connection with threaded sleeve bolts vol.34, pp.None, 2001, https://doi.org/10.1016/j.istruc.2021.07.079