• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.57-64
• /
• 2010

Metal Injection Molding (MIM) is attractive because it produces consistent, complex-geometry components for high-volume, high-strength, and high-performance applications. Also MIM using in optical communication field, display field, and semi-conductor field is a cost-effective alternative to metal machining or investment casting parts. It offers tremendous single-step parts consolidation potential and design flexibility. The objective of this paper is to study the suitability of design, flow analysis, debinding and sinterin processes, and capability analysis. The suitable injection conditions were 0.5~1.5 second filling time, 11.0~12.5 MPa injection pressure derived from flow analysis. The gravity of the product is measured after debinding an sintering. The maximum and minimum gravity levels are 7.5939 and 7.5097. the average and standard deviation are 7.5579 and 0.0122; when converted into density, the figure stands at 98.154%. According to an analysis of overall capacity, PPM total, which refers to defect per million opportunities(DPMO), stands at 166,066.3 Z.Bench-the sum of defect rates exceeding the actual lowest and highest limits-is 0.97, which translates into the good quality rate of around 88.4% and the sigma level of 2.47.

• 한국대기환경학회지
• /
• 제8권3호
• /
• pp.179-190
• /
• 1992

This study was carried out to characterize sources of atmospheric total suspended particulates (TSP) in urban and sub--urban areas of metropolitan taegu. The sources were tentatively identified by a multivariate technique, i.e. principal component analysis (PCA), and the source contributions to the atmospheric concentrations of TSP were further estimated by stepwise multiple regression analysis. A total of 5 sources was identified in the urban area of Taegu (soil dust resuspension, fuel combustion, secondary aerosol, traffic related aerosol, and refuge burning), while 4 sources were found to be significant in the sub--urban area as following: fuel combustion/secondary aerosol, soil dust resuspension, traffic related aerosol, and wood/agricultural burning. The largest contributor to the atmospheric TSP appeared to be the soil dust resuspension in both areas. The source apportionment of the extractable organic matter (EOM) was also carried out for the Taegu data. The EOM was determined with respect to the solvent polarity, i.e. cyclohexane (non-polar), dichloromethane (semi--polar), and acetone (polar). In addition, the source profiles for the TSP in Taegu area were estimated using a PCA-based algorithm, and the validity was evaluated tentatively by comparing the data in the literature.

• Journal of Microbiology and Biotechnology
• /
• 제13권5호
• /
• pp.778-782
• /
• 2003

In the course of screening anti-influenza agents from natural products, four neuraminidase inhibitors were isolated from the methanol extract of mushroom Microphorus affinis by purification using solvent partition, silica gel column chromatography, Sephadex LH-20, and semi-preparative HPLC. The chemical structures of these compounds were identified as ${\alpha}-lupeol$, methyl linoleate, methyl palmitate, and methyl oleate by means of spectral data including GC-MS, $^1H-,\;and\;^{13}C-NMR\;with\;IC_{50}$ values of 5.65, 7.07, 7.12, and $7.52\;\mu\textrm{M}$, respectively. They did not inhibit other glycosidases such as glucosidase, mannosidase, and galactosidase, indicating that they were relatively specific inhibitors of neuraminidase. The relationship between the fatty acid structure and inhibitory activity was investigated. The result showed that, in the case of an aliphatic linear hydrocarbon skeleton, at least one carboxyl (presumably any carbonyl) moiety and sixteen carbons were the necessary requirements for potent inhibition, whereas saturated, unsaturated, free, and ester forms did not have any significant effect on the activity.

• 한국수산과학회지
• /
• 제45권3호
• /
• pp.201-206
• /
• 2012

Supercritical carbon dioxide ($SCO_2$) extraction was used to recover concentrated proteins and to remove lipids and odor causing compounds from anchovy. Engraulis japonicus $SCO_2$ was used as the solvent for extraction, which was performed in a semi-batch flow reactor. The experimental conditions used were pressure, 15-25 MPa; temperature, $40-60^{\circ}C$ and sample size, 500 ${\mu}m$. The proteins obtained under these conditions performed well in a sensory evaluation; moreover, effective lipids and odor removal was achieved. The stability and characteristics of the proteins recovered with different solvents were also evaluated. The samples were sterilized by processing with $SCO_2$. Escherichia coli was not detected after storage for several days. The sensory characteristics were found to be superior to those of a sample produced by hexane extraction. Thus, the protein concentrate was obtained at $60^{\circ}C$ and 25 MPa was deemed valuable as a foodstuff.

• KSBB Journal
• /
• 제17권2호
• /
• pp.148-152
• /
• 2002

초임계 이산화탄소를 이용한 유자과피로 부터의 휘발성 정유성분의 추출은 entrainer를 사용하지 않을 경우 압력 13.8㎫, 온도 4$0^{\circ}C$에서 756.61mg/sample 30g이 추출되었으며 entrainer를 7.4mL/min을 첨가하였을 경우 압력이 13.8㎫, 온도 4$0^{\circ}C$에서 5416.64mg/sample 30 g이 추출되어 약 7배의 추출량의 증가를 볼 수 있었다. 이는 보조용매를 첨가함으로서 초임계 이산화탄소의 유자과피의 휘발성 정유성분에 대한 용해력을 증가시키는데 큰 영향을 미치는 것으로 알 수 있다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권6호
• /
• pp.496-502
• /
• 2006

Off-flavors and unfavorable odors in tuna fish oil were successfully removed and identified using supercritical carbon dioxide extraction, while retaining variable compounds, polyunsaturated fatty acids such as EPA (eicosapentaenoic acid) and DHA (docosahexaenoic acid). Samples of oil were extracted in a 100 mL semi-batch stainless steel vessel under conditions which ranged from 8 to 20 MPa and $20\;to\;60^{\circ}C$ with solvent ($CO_{2}$) flows from 10 g/min. GC-MS was used to identify the main volatile components contributing to the off-flavors and odors which included 2-methyl-1-propanol, 2,4-hexadienal, cyclopropane, and octadiene. Analyses of oil extracted at $40^{\circ}C$, 20 MPa showed a 99.8% reduction in dimethyl disulfide. Other significant off-flavors identified were 2-methyl-butene, 3-hydroxy butanal and ethylbenzene.

• 분석과학
• /
• 제27권4호
• /
• pp.187-195
• /
• 2014

잠재지문이 유류된 배경과 지문과의 대조비를 높이기 위한 증강작업 시에 잠재지문의 훼손을 최소화하는 것은 매우 중요하다. 본 실험은 반다공성 표면에 유류된 잠재지문을 시아노아크릴레이트 훈증 처리 후 p-dimethylaminobenzealdehyde (DMAB) 증강시약을 사용하여 그 효과를 확인하고, 증강효과에 미치는 환경적 요인을 분석한 것이다. 실험에 사용된 모든 지문은 시아노아크릴레이트 진공 훈증 후 실온에서 24 시간 건조해 사용하였다. 시아노아크릴레이트 훈증물의 DMAB 형광염색을 위해 표면적, 온도, 기압을 달리한 조건에서 12 시간 단위로 48 시간 동안 승화시켰다. 표면적 영향에 대한 실험에서 물질의 입자크기와 용기의 크기는 DMAB의 승화속도와 형광세기에 영향을 주었다. 또한 무용매접촉법을 적용한 DMAB 형광염색은 36 시간 승화 후 최대 형광세기를 보였고, 일정 표면적 이상에서는 형광세기에 미치는 영향이 저조하였다. 온도에 관한 실험에서 DMAB는 $20^{\circ}C$의 실온에서 가장 잘 승화하였고, 최대형광 세기를 얻을 수 있는 승화시간이 48 시간에서 36 시간으로 단축되었다. 또한 $30^{\circ}C$이상의 상온에서는 오히려 적정 형광세기를 나타내는 승화시간이 길어지고, 형광세기에 미치는 영향도 미약했다. 또한 압력에 관한 실험에서는 압력의 변화가 매우 크지 않는 이상 형광세기가 비진공상태에서의 형광세기보다 약했다.

• 한국의류산업학회지
• /
• 제15권1호
• /
• pp.138-146
• /
• 2013

Chemical compositions and biological functions of brown colorants extracted from pine bark(Pinus densiflora) have been studied. Dyeing test using multifiber fabrics with extracted colorants were preliminary carried out. Dyeing conditions and fastness tests of selected fabrics have been also studied. The brown colorants were produced 1.5% concentrations by solvent extraction from milled pine bark using methanol. The colorants were extracted with 80% methanol as best choice by a criteria of solid quantity and dyeability on fabrics. The chemical compositions were identified as mixtures of taxifolin epicatechin and procyanidin by LC/MS analysis. The brown colorants could be dyed not only natural fibers such as cotton, silk and wool but also synthetic fiber as nylon and semi-synthetic fiber as viscose rayon. Maximum K/S values was shown at 400 nm according to different fiber with color appearance of redish brown. Optimum pH and temperature of dyeing conditions was 4 and above $80^{\circ}C$, respectively. The brown colorants had a strong antioxidant activity compared to Butylated hydroxyanisole as standard and weak antimicrobial activity against E. coli. compared to kanamycin. Washing, rubbing, perspiration, dry cleaning and light fastness for cotton, nylon and silk dyed with the brown colorants were carried out by KS K method. Most of color fastness such as washing, rubbing, perspiration, and dry cleaning were represented as 4-5 grade. However, light fastness was reported as 2-3 grade. From this studies, brown colorants produced pine bark have a high potentials for natural dyeing on fabrics with antioxidant activity.

• Membrane and Water Treatment
• /
• 제9권1호
• /
• pp.43-51
• /
• 2018

Hollow fiber (HF) membranes are gaining wide interest over flat membranes due to their compaction and high area to surface volume ratio. This work addresses the fabrication of HF from polysulfone (PS) and polyethersulfone (PES) using N-methylpyrrolidone (NMP) as solvent in addition to other additives to achieve desired characteristics. The semi-pilot spinning system includes jacketed vessel, four spinneret block, coagulation and washing baths in addition to dryer and winder. Different parameters affecting dry-wet spinning phase inversion process were investigated. Dope compositions of PES, NMP and polyvinyl pyrrolidone (PVP) of varying molecular weights as additive were addressed. Some critical parameters of importance were also investigated. Those include dope flow rate, air gap, coagulation & washing baths and drying temperatures. The measured dope viscosity was in the range from 1.7 to 36.5 Pa.s. Air gap distance was adjusted from 20 to 45 cm and coagulation bath temperature from 20 to $46^{\circ}C$. The HF membranes were characterized by scanning electron microscope (SEM), atomic force microscope (AFM) and mechanical properties. Results indicated prevalence of finger like structure and average surface roughness from about 29 to 78.3 nm. Profile of stress strain characteristics revealed suitability of the fibers for downstream interventions for fabrication of thin film composite membrane. Different empirical correlations were formulated which enable deeper understanding of the interaction of the above mentioned variables. Data of pure water permeability (PWP) confirmed that the fabricated samples fall within the microfiltration (MF)-ultrafiltration (UF) range of membrane separation.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.879-886
• /
• 2006

The analytical methods of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs) for water sample with extremely low concentration was developed to extract large volume and to improve fast chromatography for clean up. Semi-automated solid phase extraction (SPE) system and column coupling chromatography using elution pump was optimized and applied to each processes of treatment plant. Results of disk type SPE indicated that this system was applicable below 40 L of aqueous sample with a flow rate of 0.08 ~ 0.2 L/min. Average recoveries of SPE using labeled sampling spike of $^{37}Cl$-2,3,7,8-TCDD was 97%. Column coupling method resulted in reduced clean up time, solvent volume, increased average recoveries with constant elution rate. The combined methods were applied to the monitoring of drinking water treatment plant. Limits of detection (LOD) of each process were calculated. For example, LOD of raw and treated water ranged 0.094~0.968 pg/L and 0.028~0.364 pg/L, respectively. Combined methods of extraction and cleanup techniques provided fast analysis of PCDD/Fs with high accuracy and low LODs for water samples.