• Journal of Welding and Joining
• /
• v.33 no.1
• /
• pp.41-48
• /
• 2015

In this study, the effect of heat input on weld metal microstructure and the effects of dissimilar weld heat affected zone in quenched and tempered ASTM A517 on the stainless steel AISI 316L is investigated through the optimization of welding parameters. For this purpose, two welding techniques are used, tungsten-conventional gas and pulsed gas with weld wire ER 309MoL with Diameter 2.4 mm. Research showed that the grain size of the heat affected zone in pulsed welding is less compared with conventional welding; weld metal structure is fully austenitic, it has a finer structure in the pulsed method. Additionally, the growth of weld metal adjacent steel A517 is different from steel 316L. Further, investigation showed that the rate of dilution is less in the pulsed method and the impact energy is increased in each three regions of the weld metal and heat affected zones in the pulsed method; the fracture in the weld metal and heat affected zone of steel 316L is quite soft and it is semi-crispy in the heat affected zone of steel A517.

• 한국해양학회지
• /
• v.19 no.1
• /
• pp.82-88
• /
• 1984

The Gwangyang Bay, southern coast of Korea, is characterized by its semi-enclosed basin morphology and mesotidal regime. The Seomjin River, in particular, has a complex delta depositional system at its mouth, which has approximately 44$\textrm{km}^2$ in the total surface area. Various sedimentary environments, such as delta, intertidal flat, subtidal zone and major tidal channels are recognized based on sediment facies and depositional regime. However, the essential intertidal flat environments are developed mainly in the western parts of the bay which is generally low in energy, i, e. tidal current and wave action.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.565-565
• /
• 2012

그래핀(Graphene) 기반의 전계효과 트랜지스터(Field effect transistor) 응용에 있어, 가장 핵심적인 도전과제중 하나는 에너지 밴드갭(Energy bandgap)을 갖는 그래핀 채널의 제작이다. 그래핀은 에너지 밴드갭이 존재하지 않는 반금속(semi metal)의 특성을 지니고 있어, 그 본래의 물리적 특성을 지니고서는 소자구현에 어려움이 있다. 그러나 폭이 수~수십 나노미터인 그래핀 나노리본(Graphene nanoribbon)의 경우 양자구속효과(Quantum confinement effect)에 의하여 에너지 밴드갭이 형성되며, 갭의 크기는 리본의 폭에 반비례한다는 연구결과가 보고된 바 있다. 이러한 이유에서, 효과적이며 실현가능한 그래핀 나노리본의 제작은 필수적이다. 본 연구에서는 은 나노 와이어(Ag nanowire)를 기반으로 한 그래핀 나노리본의 합성을 연구하였다. 은 나노와이어를 열화학 기상증착법(Thermal chemical vapor deposition)을 이용, 아세틸렌(Acetylene, C2H2) 가스를 탄소공급원으로 하여 그래핀을 나노와이어 표면에 합성하였다. 합성과정에서 구조에 영향을 미치는 요인인 합성온도와 가스의 비율, 압력 등을 조절하여 최적화된 합성조건을 확립하였다. 합성된 나노리본의 특성을 라만분광법(Raman spectroscopy)과 주사전자 현미경(Scanning electron microscopy), 투과전자현미경(Transmission electron microscopy), 원자힘 현미경(Atomic force microscopy)를 통하여 분석하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.582-591
• /
• 2000

In this paper, the Finite-Difference Time-Domain(FDTD) modeling method of the Korean human head is introduced to calculate electromagnetic energy absorption for the human head by mobile phones. After MRI scanning data is obtained, 2 dimensional(2D) segmentation is done from the 2D MRI image data by the semi-automatic method. Then, 3D dense segmentation data with $1mm\times1mm\times1mm$ is constructed from the 2D segmentation data. Using the 3D segmentation data, coarse FDTD models of human head that is tilted arbitrarily to model the condition of tilted usage of mobile phone.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.240-244
• /
• 2000

The three-dimensional orientation distribution function of a conical shaped tungsten liner prepared by the thermo-mechanical forming process was analyzed by 1.525$\AA$ neutrons to carry out the Rietveld refinement. The pole figure data of three reflections, (110)(220) and (211) were measured. The orientation distribution functions for the normal and radial directions were calculated by the WIMV method. The inverse pole figures of the normal and radial directions were obtained from their orientation distribution functions. The Rietveld refinement was performed with the RIETAN program that was slightly modified for the description of preferred orientation effect. We could successfully do the Rietveld refinement of the strongly textured tungsten liner by applying the pole density of each reflection obtained from the inverse pole figure to the calculated diffraction pattern. The correction method of preferred orientation effect based on the inverse pole figures showed a good improvement over the semi-empirical texture correction based on the direct usage of simple empirical functions.

• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.53-71
• /
• 2014

A semi-analytical method is developed to consider free vibrations of a functionally graded elastic plate resting on Winkler elastic foundation and in contact with a quiescent fluid. Material properties are assumed to be graded distribution along the thickness direction according to a power-law in terms of the volume fractions of the constituents. The fluid is considered to be incompressible and inviscid. In the analysis, the effect of an in-plane force in the plate due to the weight of the fluid is taken into account. By satisfying the compatibility conditions along the interface of fluid and plate, the fluid-structure interaction is taken into account and natural frequencies and mode shapes of the coupled system are acquired by employing energy methods. The results obtained from the present approach are verified by those from a finite element analysis. Besides, the effects of volume fractions of functionally graded materials, Winkler foundation stiffness and in-plane forces on the dynamic of plate are elucidated.

• Korean Journal of Crystallography
• /
• v.11 no.3
• /
• pp.137-146
• /
• 2000

The stoichiometric mix of evaporating materials for he CuInS₂ single crystal thin films was prepared. To obtain the single crystal thin films, CuINS₂ mixed crystal was deposited on etched semi-insulator GaAs(100) substrate by the hot wall epitaxy(HWE) system. The source and substrate temperature were 640℃ and 430℃, respectively and the thickness of the single crystal thin films was 2 ㎛. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction(DCXD). The carrier density and mobility deduced from Hall data are 9.64x10/sup 22//㎥ and 2.95x10/sup -2/ ㎡/V·s, respectively at 293 K. he optical energy gap was found to be 1.53 eV at room temperature. From the photocurrent spectrum obtained by illuminating perpendicular light on the c-axis of the thin film, we have found that the values of spin orbit coupling splitting ΔSo and the crystal field splitting ΔCr were 0.0211 eV and 0.0045 eV at 10K, respectively. From PL peaks measured at 10K, were can assign the 807.7 nm (1.5350 eV) peak to E/sub x/ peak of the free exciton emission, the 810.3 nm(1.5301 eV) peak to I₂ peak of donar-bound exciton emission and the 815.6 nm(1.5201 eV) peak to I₁ peak of acceptor-bound excition emission. In addition, the peak observed at 862.0 nm(1.4383 eV) was analyzed to be PL peak due to donor-acceptor pair(DAP).

• Journal of Korean Society of Water and Wastewater
• /
• v.17 no.4
• /
• pp.550-558
• /
• 2003

Digestion of primary sludge was conducted to evaluate the effects of reactor configuration using UAD, CUAD, TPAD, and semi-continuos CSTR. Highest VSS reduction and gas production were obtained in CUAD at all HRT. More efficient digestion was accomplished in upflow digesters compared to TPAD and CSTR. Higher thickening of solids in reactor and longer solids retention were main reasons for the enhanced digestion in CUAD and UAD. Performance based on the SRT of CUAD was nearly identical to that of UAD. However, those of TPAD and CSTR were lower than that of CUAD. Particulate and soluble organics in upflow reactors were well adsorbed due to secreted extracellular polymeric substances from the sludge granules. These might result in close proximity of microorganisms and substrates and enhanced hydrolysis. Additionally, diverse anaerobic microorganisms and neutral pH in upflow reactor could induce more activity of hydrolytic enzymes and sludge granules might offer lower thermodynamic energy state. While, excessive mixing in CSTR could break conglomerates of enzymes and substrates into fine particles, which resulted in lowered hydrolysis. Low pH level in acid fermenter of TPAD lowered hydrolysis of the particulate substrates.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.594-604
• /
• 1994

The storm surges caused by the typhoon Brenda in 1985 were studied by analysing tidal observation data at 7 stations along the south coast of the Korean peninsula. The tidal deviation at these stations along the coast are discussed in association with meteorological data. The sea level anomalies were studied by means of the Empirical Orthogonal Function (EOF) analysis and the Fast Fourier Transform(FFT) method. From the result of EOF analysis, the temporal and spatial variations of storm surge were described by the first mode of EOF, which is $73\%$ of the total variances during the passage of typhoon Brenda. From the results of FFT spectral analysis, the peak energy of the autospectrum for surge, atmospheric pressure, and wind stress appeared in the low frequency fluctuations band. The result of FFT analysis showed that the typhoon surge was related chiefly to the atmospheric pressure change in an open bay such as Cheju and Keomundo harbor, while it was influenced mainly by the wind stress in the semi-enclosed waters of Yeosu, Chungmu and Kadukdo.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.81-86
• /
• 2001

We have investigated surface photovoltage characteristics of InGaAs grown by metalorganic chemical vapor deposition (MOCVD) method on semi-insulating GaAs. The splitted SPV signals from the substrate and epilayer were observed. The band gap energy of InGaAs was about 1.376 eV, The In composition(x) was determined by Pan's composition formula. The photovoltage gradually decreases with increasing frequency. This is because the transfer of charge from the surface states reduces. From the temperature dependent SPV measurement, we obtained Varshni and temperature coefficients. In spectrum of etched sample at 300 K, the 'A' peak below $E_o(GaAs)$ is related with residual impurity during sample growth.