• Fisheries and Aquatic Sciences
• /
• v.11 no.2
• /
• pp.88-97
• /
• 2008

Lipoproteins are complexes of lipids and specific apolipoproteins that are involved in lipid transport and redistribution among various tissues. In this study, we isolated full-length apolipoprotein cDNA sequences encoding apolipoprotein A-I (apoA-I), apoE, apoC-II, and apo-14 kDa in barred knifejaw, Oplegnathus fasciatus. In addition, we reconstructed phylogenetic trees and investigated mRNA tissue distributions. Alignment analyses of amino acid sequences revealed that secondary structures of the polypeptides apoA-I, apoE, and apoC-II in barred knifejaw are well conserved with their teleostean and mammalian counterparts in terms of characteristic tandem repetitive units forming amphipathic ${\alpha}$-helices. Both the sequence alignment data and cleavage sites of apo-14 kDa indicated a clear differentiation between Percomorpha and Cypriniformes. Meanwhile, the phylogenetic trees of apolipoprotein sub-families suggested that the common ancestor prior to the split of the Actinopterygii (ray-finned fishes) and Sarcopterygii (tetrapods) would have possessed the primordial protein-encoding genes. Tissue distribution of each apolipoprotein transcript determined by semi-quantitative RTPCR showed that barred knifejaw apoA-I transcripts were more or less ubiquitously expressed in the liver, intestines, brain, muscle, spleen, and kidney. The most striking difference from previous observations on barred knifejaw was the ubiquitous expression of apoE across all somatic tissues. Barred knifejaw apoC-II showed tissue-specific expression in the liver and intestines, while the liver and brain were the major sites of apo-14kDa mRNA synthesis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.631-631
• /
• 2013

Battery has major drawbacks including its size and life expectancy, and environmental problem. As an alternative, energy harvesting is emerging as a potential solution to replace battery along with more energy-efficient IT devices. The idea of harnessing energy from our living environment is sustainable, semi-permanent, and eco-friendly. Also, unlike battery, energy harvester does not require much space to store energy. Therefore, energy harvesting can provide a better source of power for small, portable, and wireless devices. Among various ways of harvesting energy from our surroundings, triboelectricity is chosen due to its potential to be miniaturized, and efficient. Triboelectric effect occurs as two different materials with different polarity of charge separation come into contact through friction, and then become separated so that electric potential difference is achieved. In this research, such characteristic of triboelectricity is used as a way to convert ambient mechanical energy into electric energy.Series of recent researches have shown promising results that the triboelectric energy harvester can be simple and cost effective. However, sufficient electricity level required to operate mobile devices has not yet been achieved.In this research, our group focuses on the design and optimization of triboelectric energy harvesting device to enhance its output. By using maskless lithography to pattern Kapton film and silicon substrate, which is used as a mold for PDMS thin layer, and sputtering metal electrodes on each side, we fabricate and demonstrate different designs of triboelectric energy harvester that utilizes the contact electrification between a polymer thin film and a metal thin foil. In order to achieve optimized result, the output voltage and current are measured under diverse conditions, which include different surface structure and pattern, material, and the gap between layers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.365-373
• /
• 2015

In this paper, a planar antenna with monopole-like radiation pattern for on-body communications is proposed. The proposed antenna consists of three split-rings(SR) to generate a monopole-like radiation characteristic. To account for the on-body application, the proposed antenna is designed to have a low-profile. The antenna has an overall dimensions of $0.29{\lambda}_0{\times}0.29{\lambda}_0{\times}0.008{\lambda}_0$ at 5.8 GHz industrial, scientific, and medical(ISM) band(5.725~5.875 GHz). To verify the body effect, a two-thirds muscle equivalent semi solid phantom is fabricated and used to measure the antenna performance. The 10-dB return loss bandwidth is 280 MHz(5.68~5.96 GHz) and the measured peak gain is 1.91 dBi.

• Journal of the Korean Institute of Gas
• /
• v.8 no.3 s.24
• /
• pp.1-7
• /
• 2004

The polyethylene pipe can use semi-permanent because of the high corrosion resistance with chemical stability. In addition to, there is the merit that is an easy to establish and to maintain. However, as the reason that it is simply degraded when the polyethylene pipe was exposed to the outside, mainly it is used to lay under the ground with low-pressure gas transportation pipe. In this study, the nondestructive evaluation method was used to maintain the integrity of the polyethylene pipe. We simulated the various defects on the polyethylene pipes, and then the AE signal occurred according to the impact test of steel ball was evaluated by the acoustic emission method. From the results, the waveform and dominant frequency could be distinguishing from the defect shapes of polyethylene pipe. Especially, in the case of notch defect, the AE signals occur different by the angle and depth of the notch.

• Computers and Concrete
• /
• v.2 no.1
• /
• pp.31-53
• /
• 2005

In the present structural codes the safety verification is based on a linear analysis of the structure and the satisfaction of ultimate and serviceability limit states, using a semi-probabilistic security format through the consideration of partial safety factors, which affect the action values and the characteristic values of the material properties. In this context, if a non-linear structural analysis is wanted a difficulty arises, because the global safety coefficient, which could be obtained in a straightforward way from the non-linear analysis, is not directly relatable to the different safety coefficient values usually used for the different materials, as is the case for reinforced concrete structures. The work here presented aims to overcome this difficulty by proposing a methodology that generalises the format of safety verification based on partial safety factors, well established in structural codes within the scope of linear analysis, for cases where non-linear analysis is needed. The methodology preserves the principal assumptions made in the codes as well as a reasonable simplicity in its use, including a realistic definition of the material properties and the structural behaviour, and it is based on the evaluation of a global safety coefficient. Some examples are presented aiming to clarify and synthesise all the options that were taken in the application of the proposed methodology, namely how to transpose the force distributions obtained with a non-linear analysis into design force distributions. One of the most important features of the proposed methodology, the ability for comparing the simplified procedures for second order effects evaluation prescribed in the structural codes, is also presented in a simple and systematic way. The potential of the methodology for the development and assessment of alternative and more accurate procedures to those already established in codes of practice, where non-linear effects must be considered, is also indicated.

• Membrane and Water Treatment
• /
• v.9 no.4
• /
• pp.273-278
• /
• 2018

Due to the lack of water in arid and semi-arid areas, reuse of wastewater can be a suitable way to compensate for water scarcity. Therefore, in this research, evaluation of the quality of wastewater of Kashan Treatment Plant to use for irrigation was studied. This descriptive cross-sectional study was conducted in 2016. pH, TSS, TDS, turbidity, COD, BOD5, Total Kjeldahl Nitrogen, Total Phosphorus, Total Coliform, fecal coliform, nematode eggs of inlet and outlet of wastewater treatment plant in Kashan were studied. Mean and standard deviation and wastewater quality parameters before and after treatment were tested with SPSS 22 (2014) software. The mean wastewater output of COD, BOD5, TSS, TDS and turbidity were respectively 86.6, 41.2, 11.11, 1095 mgL-1 and 17.5 NTU and the pH was equal to 7.22. Also, the average of Total Kjeldahl Nitrogen and phosphorus were 22.4 and 2.2 mgL-1 respectively. The mean of Total Coliform and fecal coliform were 225, 161 MPN / 100 ml respectively. In addition, no nematode eggs were found in final effluent. The results indicated that the treatment plants had a significant role in the control of microbial and organic pollution load of wastewater. Also, it is concluded that all parameters were in accordance with the standards of Iran's Department of Environment, so, it can be used for unrestricted irrigation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.321-327
• /
• 2006

This paper presents low power and high frequency design of instructions using ad-hoc techniques at transistor level for full custom and semi-custom ASIC(Application Specific Integrated Circuit) designs. The proposed design has been verified at high level using Verilog-HDL and simulated using ModelSim for the logical correctness. It is then observed at the layout level using LASI using $0.25{\mu}m$ technology and analyzed for timing characteristic under Win-spice simulation environment. The result shows the significant reduction up to $35\%$ in the power consumption by any general purpose processor like RISC or CISC. A significant reduction in the propagation delay is also observed. increasing the frequency for the fetch and execute cycle for the CPU, thus increasing the overall frequency of operation.

• Korean Journal of Heritage: History & Science
• /
• v.35
• /
• pp.236-282
• /
• 2002

Among elements of play, there are puppets performances and shadows performance which are replacing actors by puppets and shadows. Puppet performance is characteristic of expressing various movements and symbols at its conveniences by the reduced models of human form with various materials. Shadow performance is realized in various colors that cannot be discovered in other countries by expressing mysterious cubic effect in reflecting the light against various forms. Mansukjung Nolum is a unique shadow performance that has been inherited in Korea. There are found many shadow performances inherited in the northern Europe and South-eastern Asia. Recently the silhouette animation in application of shadow performance is made. In the northern Europe and South-eastern Asia, they performed in white and black color while Mansukjung Nolum is performed in natural colors. Since they adopted the leather materials for making puppets, their opaque feature cannot reflect the colored light. But in Korea we adopted the specially colored semi-transparent Korean paper, which gives the colored shadows to spectators. Mansukjung Nolum consists of three acts for arousing attention of fallen monks destroying the teaching of Buddha. Seosanbakchumji Nolum is a puppet performance inherited in a village in Seosan, Choongnam instead of wandering artists. The story and form of performance in Namsadangpae's puppet play is mostly similar to it, but it is woven by its villages natural environment and specific dialects, reflecting their consciousness in mind. The villagers made the puppets and manipulate them in communicating their wisdom of life between them. Parkchumji Nolum is a kind of integral art combining puppet manipulation, witticism, songs and dances. The hero of Parkchumji discloses the social and structural conflicts of feudalism, in arousing the spectators' rich attention of self-awareness and lessons.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2019

Along with industrial development, various architectural structures have become bigger and higher, leading to an expansion in the size and capacity of construction equipment. And with the development of public transportation, the use of subways as a means of transportation in the city center is increasing, so that vibrations and structural noises are emerging as a new environmental issue. Considering that architectural structures may be used from several decades to hundreds of years after the time of construction, they can be seen as semi-permanent. Due to changes in the vibration-proof polyurethane mats installed in the foundation of these structures, settling may occur and vibration reduction may become inadequate. Therefore, in view of service life, it is necessary to have a high-level standard of reliability and stability. In accordance with this, the Floating Floor System, which uses soft polyurethane foam and can be constructed within a relatively short period of time, has excellent vibration resistant characteristics. It is presented as a great alternative solution to the issue of vibrations caused by subways, railways and building structures. At present, vibration-proof polyurethane mats have been developed up to the same product level as in other advanced countries. However, in the construction of structure foundations, the physical properties of this product and its shape incur changes. If they are installed as such in the structure of a building, it may cause significant impact on stability, requiring that this cause be urgently identified and improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.3
• /
• pp.464-470
• /
• 2021

Automobiles have been used as simple means of transportation, but recently, as automobiles are rapidly becoming intelligent and smart, and automobile preferences are increasing, research on IT technology convergence is underway, requiring basic high-performance functions such as driver's convenience and safety. As a result, autonomous driving and semi-autonomous vehicles are developed, and these technologies sometimes deviate from lanes due to environmental problems, situations that cannot be judged by autonomous vehicles, and lane detectors may not recognize lanes. In order to improve the performance of lane departure from the lane detection system of autonomous vehicles, which is such a problem, this paper uses fast recognition, which is a characteristic of YOLO(You only look once), and is affected by the surrounding environment using CSI-Camera. We propose a lane detection system that recognizes the situation and collects driving data to extract the region of interest.