• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.589-592
• /
• 2011

In this paper, bidirectional DC-DC converter is designed to cover up defects of fuel cell generating system like as low dynamic characteristic, unstable output and lack of storage ability by using bidirectional DC-DC Converter and supercapacitor that available to charge & discharge quickly, high efficient at charge & discharge and semi-permanent. Operating efficiency has been analyzed through simulation and examination. According to these design and data, hybrid system has been made and operation test, evaluation and results evaluation have been performed.

• Structural Engineering and Mechanics
• /
• v.58 no.1
• /
• pp.59-91
• /
• 2016

Laminated composite shells are commonly used in various engineering applications including aerospace and marine structures. In this paper, using semi-analytical finite strip method, the buckling behavior of laminated composite deep as well as thick shells of revolution under follower forces which remain normal to the shell is investigated. The stiffness caused by pressure is calculated for the follower forces subjected to external fibers in thick shells. The shell is divided into several closed strips with alignment of their nodal lines in the circumferential direction. The governing equations are derived based on first-order shear deformation theory which accounts for through thickness-shear flexibility. Displacements and rotations in the middle surface of shell are approximated by combining polynomial functions in the meridional direction as well as truncated Fourier series with an appropriate number of harmonic terms in the circumferential direction. The load stiffness matrix which accounts for variation of loads direction will be derived for each strip of the shell. Assembling of these matrices results in global load stiffness matrix which may be un-symmetric. Upon forming linear elastic stiffness matrix called constitutive stiffness matrix, geometric stiffness matrix and load stiffness matrix, the required elements for the second step analysis which is an eigenvalue problem are provided. In this study, different parameter effects are investigated including shell geometry, material properties, and different boundary conditions. Afterwards, the outcomes are compared with other researches. By considering the results of this article, it can be concluded that the deformation-dependent pressure assumption can entail to decrease the calculated buckling load in shells. This characteristic is studied for different examples.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7819-7824
• /
• 2015

Purpose: To subtype breast cancer (BC) in Saudi women according to the recent molecular classification and to correlate these subtypes with available clinicopathological parameters. Materials and Methods: Estrogen receptor (ER), progesterone receptor (PR) and human epidermal growth factor receptor (Her2/neu) immunostaining was semi-quantitatively assessed to define molecular subtypes of luminal A and B, HER-2 and triple negative (basal-like) in BC paraffin embedded sections from 115 Saudi female patients diagnosed between 2005 to 2015 at the Department of Pathology, King Fahd Hospital, Almadinah, Saudi Arabia. Results: The most common subtypes were luminal A (47%), followed by luminal B (27.8%) and basal like subtypes (18.3%), whereas HER-2 was the least common subtype (6.9%). Luminal A was predominantly found in the old age group, with low tumor grade (p<0.001) and small tumor size, whereas HER-2 and basal-like subtypes were significantly associated with young age, high tumor grade, lymph node metastasis and lymphovascular invasion (p<0.03, 0.004, 0.05 and 0.04 respectively). All subtypes showed advanced clinical stage at the time of presentation. Conclusions: Molecular subtypes of Saudi BC patients in Almadinah region are consistent with most of the worldwide subtyping. The biological behaviour of each molecular subtype could be expected based on its characteristic clinicopathological features. Along with other prognostic indicators, molecular subtyping would be helpful in predicting prognosis and management of our BC patients. We recommend screening and early diagnosis of BC in our population.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.20-27
• /
• 2020

In general, a nonlinear system is linearized in the form of a multiplication of the 1st and 2nd order system. This paper reports a design method of a weighting matrix and control law of LQ control to move the double poles that have a Jordan block to a pair of complex conjugate poles. This method has the advantages of pole placement and the guarantee of stability, but this method cannot position the poles correctly, and the matrix is chosen using a trial and error method. Therefore, a relation function (𝜌, 𝜃) between the poles and the matrix was derived under the condition that the poles are the roots of the characteristic equation of the Hamiltonian system. In addition, the Pole's Moving-range was obtained under the condition that the state weighting matrix becomes a positive semi-definite matrix. This paper presents examples of how the matrix and control law is calculated.

• Journal of Digital Convergence
• /
• v.15 no.5
• /
• pp.495-503
• /
• 2017

The purpose of this study was to investigate the effect of psychobiographical intensive interview(PII) on the parent's insight, parent-child relationship characteristics and counseling session. For this, the PII was conducted to 10 mothers with school age children. PII was semi-structured form that included the intensive interview for exploring psychobiographical information and interpretation counseling of it. The results showed that the level of insight into parent's child problem and relation to parent's own problem was significantly increased. On the other hand, parent-child relationship characteristics (parental efficacy, parenting attitude, and parenting stress) were found to be significant only in some of the parenting stresses. We investigated the possibility as a counseling tool for PII through counseling session impact assessments. As a result of that, we confirmed that there were positive results in task impacts, relationship impacts, and helpful impacts.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.2
• /
• pp.65-79
• /
• 2003

In this study GIS based pre- and post-processing tool for the Visual MODFLOW that is specific software to model groundwater flow is developed. This tool not only makes input data scientifically but also manages input and output data in terms of the groundwater flow analysis. In addition it can storage project products systematically into Oracle database. The most characteristic figure of this processing tool is to provide the module, which automatically or semi automatically develops various grid cell sizes using GIS ArcView and also produces DXF files reflecting various boundary conditions in the modeling zone. In particular, eminences of this research are to create 3 dimensional hydrogeological structures with 2 dimensional GIS ArcView and to conduct pre- and post- processing along with same topology and data format of the MODFLOW.

• Progress in Superconductivity
• /
• v.10 no.1
• /
• pp.60-67
• /
• 2008

We present domestic efforts for superconducting fault current limiter (SFCL) application in the Korea Electric Power Corporation (KEPCO) grid and pending points at issue. KEPCO's decision to upgrade the 154 kV/22.9 kV main transformer from 60 MVA to 100 MVA cast a problem of high fault current in the 22.9 kV distribution lines. The grid planners supported adopting an SFCL to control the fault current. This environment friendly to SFCL application must be highly dependent upon the successful development of SFCL having specifications that domestic utility required. The required conditions are (1) small size of not greater than twice of 22.9 kV gas insulated switch-gear (GIS), (2) sustainability of current limitation without the line breaking by circuit breakers (CB) for maximum 1.5 seconds. Also, optionally, recommended is (3) the reclosing capability. Conventional resistive SFCLs do not meet (1) $\sim$ (3) all together. A hybrid SFCL is an excellent solution to meet the conditions. The hybrid SFCL consists of HTS SFCL components for fault detection and line commutation, a fast switch (FS) to break the primary path, and a limiter. This characteristic structure not only enables excellent current limiting performances and the reclosing capability, but also allows drastic reduction of HTS volume and small size of the cryostat, resulting in economic feasibility and compactness of the equipment. External current limiter also enables long term limitation since it is far less sensitive to heat generation than HTS. Semi-active operation is another advantage of the hybrid structure. We will discuss more pending points at issues such as maintenance-free long term operation, small size to accommodate the in-house substation, passive and active control, back-up plans, diagnosis, and so on.

• Journal of Korea Water Resources Association
• /
• v.38 no.2
• /
• pp.167-177
• /
• 2005

In this study, the PRMS(Precipitation and Runoff Modeling System), developed by USGS(United States Geological Survey), was applied to the Yongdam dam watershed in the Geum River basin. The efficiency for runoff simulation and spatial characteristics of PRMS were evaluated. The runoff changes with the changes of subcatchments and HRUs were estimated. As results, the size of the subcatchment and HRV did not significantly affect the runoff at the exit of watershed. Consequently, the spatial characteristic of PRMS was shown as lumped type rather than semi-distributed. The geographical input data for Yongdam dam watershed were converted to the USGS Input type, and the parameters were calibrated using Rosenbrock optimization method, validated with the observed runoff data. The PRMS showed resonable agreements in the long-term continuous runoff simulation, if the accuracy of observed data is ensured.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.5
• /
• pp.691-703
• /
• 2013

The costume culture of ladies in late Goryeo is an important and rare source for cultural fashion souvenir design. This study investigates the historical costume design sources of late Goryeo to suggest high quality traditional and practical ornament souvenir designs for female dolls as well as examples of coordination with doll costumes. The costume culture of late Goryeo contained golden Buddhism and a revival of $12^{th}$ century Goryeo costume characteristic after the period of Mongolian influences from the Yuan. The main sources for doll ornament designs are $14^{th}$ century Buddhist paintings, a few ornament relics of Goryeo, ancient literature, and portraits of ladies in the $14^{th}$ century that originated from five doll's traditional ornaments (lotus hairpin, cloud-shaped hairpin, Buddhist flower hair ornament, vase-shaped Binyeo, and bell of animalhuman face) and three wig designs (wigs from Buddhist paintings and portraits, and hairpiece) with bleached gilding silver, silk, various gemstones and synthetic hair. These doll ornament and wig designs imply the symbol of Buddhism, exorcism, and costume culture of $14^{th}$ century Goryeo ladies that can be matched with two doll gowns, half-sleeved jacket, skirt, two Jogoris, apron, under trousers as formal, semi-formal, and town-wear according to the T.P.O of late Goryeo; in addition, five ornaments can be used as owner's ornaments. The partial changing colors and materials due to the characteristics of doll ornament goods as well as better communication between researcher and constructor remain to be improved.

• Analytical Science and Technology
• /
• v.33 no.2
• /
• pp.98-107
• /
• 2020

Methamphetamine (MA) is currently the most abused illicit drug in Korea. MA is produced by chemical synthesis, and the final target drug that is produced contains small amounts of the precursor chemicals, intermediates, and by-products. To identify and quantify these trace compounds in MA seizures, a practical and feasible approach for conducting chromatographic fingerprinting with a suite of traditional chemometric methods and recently introduced machine learning approaches was examined. This was achieved using gas chromatography (GC) coupled with a flame ionization detector (FID) and mass spectrometry (MS). Following appropriate examination of all the peaks in 71 samples, 166 impurities were selected as the characteristic components. Unsupervised (principal component analysis (PCA), hierarchical cluster analysis (HCA), and K-means clustering) and supervised (partial least squares-discriminant analysis (PLS-DA), orthogonal partial least squares-discriminant analysis (OPLS-DA), support vector machines (SVM), and deep neural network (DNN) with Keras) chemometric techniques were employed for classifying the 71 MA seizures. The results of the PCA, HCA, K-means clustering, PLS-DA, OPLS-DA, SVM, and DNN methods for quality evaluation were in good agreement. However, the tested MA seizures possessed distinct features, such as chirality, cutting agents, and boiling points. The study indicated that the established qualitative and semi-quantitative methods will be practical and useful analytical tools for characterizing trace compounds in illicit MA seizures. Moreover, they will provide a statistical basis for identifying the synthesis route, sources of supply, trafficking routes, and connections between seizures, which will support drug law enforcement agencies in their effort to eliminate organized MA crime.