• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.6
• /
• pp.269-275
• /
• 2005

Ni/Ni-aluminide/Ti/Ti-aluminide laminate composite, considered as a functionally gradient material, was manufactured by thin foil hot press technique. Thick intermetallic layers of NiAl and $TiAl_3$ were formed by a self-propagating high-temperature synthesis (SHS) reaction, and thin continuous taters of $Ni_3Al$ and TiAl were formed by a solid-state diffusion. Fracture resistance with loading along the crack arrester direction is higher than crack divider direction due to the interruption of crack growth in metal layers. The $Ni_3Al$ and NiAl intermetallic layer showed cleavage and intergranular fracture behavior, respectively, while the fracture mode of $TiAl_3$ layer was found to be an intragranular cleavage. The debonding between metal and intermetallic layer and the pores were observed in the Ni/Ni-aluminide layers, resulting in the lower fracture resistance. With the results of acoustic emission (AE) source characterization the real time of failure and the effect of AE to crack growth could be monitored.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.384.2-384.2
• /
• 2016

Recent publications reported the self-propelled jumping of coalescing dew droplets on superhydrophobic surfaces [1-2]. We further investigated the initial growth, coalescence, and removal by self-propelled ejection of nano and microscopic water droplets on the superhydrophobic surface of lotus leaves under condensing conditions. By using a high-speed digital camera mounted on an optical microscope, we have found: (1) sub-micrometer droplets form and grow on nanoscale waxy hairs; (2) growing droplets coalesce rapidly upon contact, but never jump off the surface unless the diameter of merged droplets exceeds ${\sim}15{\mu}m$; (3) the diameter and direction of jumping droplets are very narrowly distributed, centered at $20-30{\mu}m$ and ${\sim}20$ degrees from the surface normal, respectively. We present a rationale for these observations on the basis of: (a) the hierarchically rough surface structure on nano- and micro-scales; (b) its chemical composition; and (c) the balance among competing forces of cohesion (surface tension), adhesion and gravity.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.39-47
• /
• 1997

Creep rate the elevated temperature is known to be controller by the softening process of microstructure especially in the solid solution alloys such as 125 Cr rotor steel. The change of structure is a decreasing process of the free energy of the state including stress, diffusivity of the material, and tmeperature. This study shows that diffusion coefficient, D of 12% Cr rotor steel at 953K with 74.8 MPa is 1.084~3.140*$10^{15}mm^2sec^1$ compared to $1.658*10^{24}mm^2sec^1$at 963K without stress. During creep, the growth of martensite laths accelerates the diffusion coefficient under stress due to incoherency of interface between carbides and matrix.

• Macromolecular Research
• /
• v.15 no.6
• /
• pp.513-519
• /
• 2007

Self-assembled nanoparticles have great potential to act as vehicles for hydrophobic drug delivery. Understanding nanoparticle cellular internalization is essential for designing drugs intended for intracellular delivery. Here, the endocytosis and exocytosis of fluorescein isothiocyanate (FITC)-conjugated glycol chitosan (FGC) self-assembled nanoparticles were investigated by flow cytometry and confocal microscopy. The cellular internalization of FGC nanoparticles was initiated by nonspecific interactions between nanoparticles and cell membranes. Although adsorptive endocytosis of the nanoparticles occurred quickly, significant amounts of FGC nanoparticles were exocytosed, particularly in the early stage of endocytosis. The amount of exocytosed nanoparticles was dependent on the pre-incubation time with nanoparticles, suggesting that exocytosis is dependent on the progress of endocytosis. FGC nanoparticles internalized by adsorptive endocytosis were distributed in the cytoplasm, but not in the nucleus. In vitro cell cycle analysis demonstrated that FGC nanoparticles delivered paclitaxel into the cytoplasm and were effective in arresting cancer cell growth.

• Journal of the Korean Ceramic Society
• /
• v.35 no.7
• /
• pp.749-756
• /
• 1998

TiC-Ni and TiC-Ni-Mo cermet powders were produced by Self-propagating High temperature Synthesis (SHS) process. The cooling rate of synthesized powders were controlled by using the V-shaped copper jig and the carbide size decreased with increasing the cooling rate I. e decreasing the width of copper jig Round shape carbide particles were produced after SHS reaction in TiC-Ni as well as TiC-Ni-Mo powders. Local segregation of Mo rich phases was observed in SHS powder of TiC-Ni-Mo and the uneven dis-triobution of Mo promoted the faster growth rate of carbide particles during sintering compared to the same composition specimen with commercial TiC powder. Howogeneous microstructure of TiC-Ni-Mo cermet was obtained when the elemental Mo powder was mixed with the SHS powder of TiC-Ni.

• Journal of Information Technology Applications and Management
• /
• v.17 no.4
• /
• pp.83-105
• /
• 2010

Smartphone services seem to be appealing to people worldwide and show rapid growth in mobile service market. Based on the theoretical framework like attachment theory and self-congruity theory, we developed the research model and proposed six hypotheses. An analysis of 113 smartphone service users found that continued use intention in smartphone services is affected by uses' attachment to the service. We also found that the attachment is significantly increased by self-congruity, customization, and perceived usefulness. Our aim was to gain insight into ways of creating an environment that facilitating continued use intention of smartphone services. This study has important implications for academic researchers and practitioners who seek to understand why smartphone service users continuously use their smart phone services. Other practical implications of these findings and future research implications are also discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1495-1498
• /
• 2003

Recently, self-healing methods of a cracked matrix, especially polymeric composite materials, became the center of engineering researchers. In this paper, we summarized the self-healing concept for polymeric composite materials and investigated the effect of microparticle on the crack growth behavior in colorless and transparent matrix by experimental observation to describe the crack propagation around the microparticle inside epoxy matrix composite. Compression splitting test for the specimen involving microparticle was conducted. In addition, FE analysis was pursued to present the stress contour around microparticle in the matrix. Through the experiments and FE analysis, we found that the size. relative position, bonding condition and relative stiffness of microparticle are important parameters to decide the direction of crack propagation, which is related to the rupture of microparticle for self-healing

• Journal of Mushroom
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2017

Hydrophobins are surface active proteins that are produced by filamentous fungi including mushrooms. Their ability to self-assemble into an amphipathic membrane at any hydrophilic-hydrophobic interface is most intriguing. These small secreted proteins comprise of eight conserved cysteine residues which form four disulfide bridges and an extraordinary hydrophobic patch. Hydrophobins play critical roles in fungal (and/or mushrooms) growth as structural components and in the interaction of fungi and mushrooms with the environment. The biophysical and biochemical properties of the isolated proteins are remarkable, such as strong adhesion, high surface activity and the formation of various self-assembled structures. With the increasing demands of hydrophobins from fungi and mushroom sources, production and purification in large scale is under challenge. Various applications, ranging from food industries, cosmetics, nanotechnology, biosensors and electrodes, to biomaterials and pharmaceuticals are emerging and a bright future is foreseen.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.1
• /
• pp.127-130
• /
• 2005

The early stage of the self assembly for octadecyltrichlorosilane (OTS)-based monolayers is investigated using atomic force microscopy (AFM). Height measurements using AFM prove that the island height of the monolayers gradually increases with increasing the island size, and is close to the limiting value (h = $\sim$25 $\AA$) after d = $\sim$600 nm in size. Since the theoretical length of a covalently bound OTS molecule is 26.2 Å, the limiting value of the island height means that the islands with d ${\geq}$ 600 nm consist of close-packed, fully extended chains. The heights for the islands with d < 600 nm are lower than the limiting value and decrease with decreasing the island sizes. This observation indicates that the OTS molecules in the small islands are less densely packed, and that the packing densities of the islands increase as the islands grow in size.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.521-527
• /
• 1997

Ruby single crystals of 6-7 mm in dialneter and 20-25 mm in length were grown by the xenon-arc type floating zone method using a self-designed FZHY1, Calcination and sintering conditions were investigated and optimum growth conditions were established for controlling the factors such as growth rates, rotation speeds and cooling rates. Also the available energy levels of $Cr^{3+}$ were calculated from transmission data. The growth direction of the crystals was [1010] direction identified by Laue back reflection pattern. The distribution of refractive indices on the wafer of the grown crystals was homogeneous except for the edges of the wafer. The crystals could be used as a laser material with a wavelength of 693 nm and a metastate level.