• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1727-1731
• /
• 2014

Dichloromethane liquid droplets containing a cobalt dipyrromethene trimer deposited on a graphite surface were found to form coffee ring, toroid ring, or volcano dot structures due to the redistribution of the solute during solvent evaporation. The shapes and size distributions of the ring structures depended on the drying temperature. The shape differences were attributed to the fact that the solvent evaporation rate controlled the self-assembly process that yielded the coffee stain and pinhole structures.

• The Korean Journal of Ceramics
• /
• 제7권2호
• /
• pp.80-84
• /
• 2001

The anisotropic CdS platelets were synthesized in the lamellar bilayer phase region of the octylamine-water binary system. The influence of the synthesis conditions of the system components on morphology and size of the platelets was examined. Atomic force microscopy (AFM) and high-resolution transmission electron microscopy (HRTEM) studies have shown thickness and face size of the synthesized particles. Platelets with face sizes ranging from 50 to 250 nm and thickness from 10 to 30 nm have been synthesized at room temperature. In addition, HRTEM micrographs show that the synthesized platelets are poly crystal.

• 한국전기전자재료학회논문지
• /
• 제22권4호
• /
• pp.355-359
• /
• 2009

Si wafer, which was treated with TMSP-TBA (N-trimethoxysilylpropyl-n,n,n-tri-n-butylammonium bromide), was used foF a substrate to grow a MFI membrane. Growth of membranes was conducted in various conditions such as temperature and gravity, and their structures were in detail studied with field emission scanning electron microscope and x-ray diffractometer. The structures of membranes grown on substrates were strongly dependent on growing temperature and gravity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.504-510
• /
• 1991

SAMSUNG Electronics has developed a SCAR.A robot system, SM3, which is applicable to several assembly, inspection, and adjustment tasks. This robot system drives by AC servo motors has attained a .theta.1 and .theta.2 axis maximum composite speed of 5.4 m/sec, a repeatability of .+-.05 mm, and a cycle time of 1.2 sea. The robot controller based on three 8086 and one 8087 processors consists of the main controller, the joint position controller, and the motor controller. The robot controller has plentiful self-diagnosis and control capabilities, and can be interfaced to other external device. The robot language FARAL Is designed such that every task is easily programmed. In this paper, the main features of the body, controller, and FARAL of SM3 will be described. In particular, the control method designed for a stable and fast robot motion will be explained. Finally, the future development will be addressed.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.708-714
• /
• 2002

The hexanuclear metallamacrocycles were observed repeatedly in various conditions including the presence of several different tricationic metal ions in the macrocyclic ring system and of the linear alkyl chains at the acyl site of N-acylsalicylhydrazide ligand, which contrasts to the formation of the decanuclear metallamacrocycle with bulkier side chains such as phenyl group at the acyl site of the ligand. We synthesized a series of metallamacrocycles in various solvents to find the relationship between the solvents and the nuclearity of the metallamacrocycles. Whether the solvents are sterically more demanding or not, the complexes formed kept the hexanuclear metallamacrocycle system.

• Bulletin of the Korean Chemical Society
• /
• 제26권3호
• /
• pp.418-422
• /
• 2005

By introducing spin-coating method to the evaporation induced self-assembly (EISA) process, a simple and reproducible route in controlling the mesophase of silica thin films has been developed for the first time in this work. When a comparatively solvent-rich Si-sol (The atomic ratio of TEOS : F127 : HCl : $H_2O$ : EtOH = 1 : 0.006 : 0.2 : 9.2 : 30) was used as coating solution, the mesophase of resultant silica films was selectively controlled by adjusting the spin-on speed. The cubic mesophase has been obtained from the coating at a low rpm, such as 600 rpm, while the 2-D hexagonal mesophase is formed at a high rpm, such as 2,500 rpm. At a medium coating speed, a mixture of cubic and hexagonal mesophase has been found in the fabricated films. The present results confirm that the evaporation rate of volatile components at initial step is critical for the determination of mesopore structures during the EISA process.

• BMB Reports
• /
• 제44권1호
• /
• pp.22-27
• /
• 2011

A series of elastin-like proteins, $SKGPG[V(VKG)_3VKVPG]_n$-(ELP1-90)WP (n = 1, 2, 3, and 4), were biosynthesized based on the hydrophobic and lysine linkage domains of tropoelastin. The formation of self-assembled hydrophobic aggregates was monitored in order to determine the influence of cationic segments on phase transition properties as well as the sensitivity to changes in salt and pH. The thermal transition profiles of the proteins fused with only one or two cationic blocks (n = 1 or 2) were similar to that of the counterpart ELP1-90. In contrast, diblock proteins that contain 3 and 4 cationic blocks displayed a triphasic profile and no transition, respectively. Upon increasing the salt concentration and pH, a stimulus-induced phase transition from a soluble conformation to an insoluble aggregate was observed. The effects of cationic segments on the stimuli sensitivity of cationic bimodal ELPs were interpreted in terms of their structural and molecular characteristics.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.30-33
• /
• 2002

We have shown that it is possible to form a fibrilar network of fibronectin on a polyelectrolyte polymer film whose dimensions are similar to those reported on the extra cellular matrix. The fibronectin network was observed to form only when the charge density of the polymer was in excess of the natural charge density of the cell wall. Furthermore, the self-organized fibronectin layer was much thicker than the polymer film, indicating that long ranged interaction may playa key role in the assembly process. It is therefore important to understand the structure of the polymer layer/protein interface. Here we report on a neutron reflectivity study where we explore the structure of the polyelectrolyte layer, in this case sulfonated polystyrene (PSSx,), with varying degree of sulfonation (x<30%), as a function of sulfur content and counter ion concentration. These results are then correlated with systemic study of the adsorption and the multilayer formation of fibronectin as a function of incubation time for various sulfonation levels of $PSSx.^1$

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1933-1935
• /
• 2002

In this paper, we present a study of the structure and electro-optic behavior of hybrid liquid-crystal-silica sphere composite photonic crystals, formed by filling the (26% by volume) void space of fee (face centered cubic) silica opals infiltrated with a nematic liquid crystal. Three dimensional photonic crystals of visible range were fabricated via a self assembly method of silica spheres of submicron diameter. The expected fee structure was confirmed by scanning electron microscopy (SEM) of the dehydrated crystal with glass removed. The photonic crystal exhibited significant electric-field-induced shift of the optical Bragg reflection peak when the liquid crystal has the long molecular axis oriented parallel to the sphere surfaces.

• Korea-Australia Rheology Journal
• /
• 제20권3호
• /
• pp.153-164
• /
• 2008

Modeling and experiments of three electrospinning systems have been presented and they are i) axisymmetric instabilities in electrospinning of various polymeric solutions, ii) non-isothermal modeling of polymer melt electrospinning, and iii) control of nanoparticle distribution and location via confined self-assembly of block copolymers during electrospinning. It has been demonstrated that predicted simulations are in good agreement with corresponding electro spinning experiments, and theoretical analysis provides fundamental understanding of phenomena that take place during electrospinning of various polymeric liquids.