• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.90.2-91
• /
• 2003

In commercial greenhouses, senescent flower petals or flowers of vegetables such as tomato, strawberry, hot pepper and zucchini squash were blighted to be removed from fruits within five days after spraying of Trichoderma harzianum YC459 (TORY), a biocontrol agent for the gray mold rot of vegetables caused by B. cinerea The mechanism for selective colonization of senescent floral tissues by T. harzianum YC459 was elucidated using fresh and senescent (Hays and 14days after flowering, respectively) floral tissues of zucchini squash (Cucurbita moschata Duchesne). The spores of T. hrzianum YC459 were produced more on agar and liquid culture media supplemented with 5％ dry powder of senescent floral tissues than fresh tissues during 15days. Mycelial growth was also much better in the media with senescent tissues than with fresh tissues. Enzyme activities of amylase, polygalacturonase and cellulase in the liquid media which might be involved in the colonization of tissues by T. harzianum YC459 were compared. The activities of three enzymes were much higher in the media with senescent floral tissues than with fresh floral tissues reaching to the maximum during 9 to 12days of incubation. Based on the results, the removal of senescent floral tissues, a possible inoculum source of the pathogen, may be another mechanism for biocontrol of gray mold rot of vegetables by T. harzianum YC459.

• 자원리싸이클링
• /
• 제4권3호
• /
• pp.19-25
• /
• 1995

중유 탈황공정에서 발생되는 VRDS(Vacuum Residuc Desulfurization)폐촉매로부터 유가금속 (Vanadum, Molybdenium)의 회수 연구를 수행하였다. 실험은 폐촉매 중의 S와 C 성분을 제거하기 위한 통기소성, Vanadium 와 Molybdenium의 추출을 위한 소다 배소와 침수 및 침출처리으로부터 Vanadium와 Molybdenium를 각각 회수하기 위한 선별침전으로 구성하였다. 통가배소시 배소온도 및 시간 변화, 소다배소시 $Na_2CO_3$의 농도변화, 침출시 광액농도, 온도 및 시간변화에 대하여 실험을 수행하였고, 이때 Vanadium와 Molybdenium의 수율이 85%이상인 최적조건을 구하였다. 침출여액으로부터 Vanadium와 Molybdenium을 침전 회수하기 위해 pH 및 첨가제의 농도변화 실험을 통해 각각 98%이상의 회수율을 얻었다.

• 청정기술
• /
• 제27권4호
• /
• pp.341-349
• /
• 2021

연소시설에서는 화석연료에 포함된 질소와 황이 산소와 반응하여 대기 오염물질인 질소산화물(NO_X)과 황산화물(SO_X)을 발생시킨다. 인체에 유해하고 환경 오염을 야기하는 NO_X, SO_X를 저감하기 위해 전세계적으로 환경규제를 시행 중이며, 규제를 충족하기 위해 다양한 기술들을 적용하고 있다. 상용화된 NO_X 및 SO_X 저감방식들로 SCR (selective catalytic reduction), SNCR (selective non-catalytic reduction), WFGD (wet flue gas desulfurization) 등이 있으나 이 방식들의 단점들 때문에 NO_X, SO_X를 동시제거하는 연구가 근래 많이 수행되고 있다. 그러나 NO_X, SO_X 동시 제거 방식에서도 산화제 및 흡수제로 인한 폐수 발생에 대한 문제점, 특정 산화제를 활성화 하기 위한 촉매 및 전기분해 사용에 따른 비용 발생, 마지막으로 기체 산화제들 자체 유해성의 문제점을 가지고 있다. 따라서 본 연구에서는 NO_X, SO_X 동시처리 방식의 단점들을 보완하고자 고압분산기에서 생성된 마이크로버블과 환원제를 이용하여 비용절감 및 폐수처리 시 환경부하저감 가능성을 확인해 하고자 하였다. 분산기가 마이크로버블을 생성하는 것을 이미지 프로세싱과 ESR (electron spin resonance) 분석을 통해 확인하였으며, 마이크로버블만을 이용하여 온도에 따른 NO_X, SO_X 제거율 성능 테스트도 진행하였다. 뿐만 아니라 폐수를 저감하기 위해 환원제와 마이크로버블을 이용하여 습식으로 NO_X 제거율 약 75%, SO_X 제거율 99%를 달성하였다. 본 마이크로버블 시스템에 산화제를 함께 투여할 경우 NO_X, SO_X제거율 모두 99%이상을 달성 하였다. 이러한 연구 결과를 토대로 습식산화제거방식을 적용하는 시설의 단점이었던 비용 및 환경 문제를 해결함에 기여할 수 있을 것으로 기대 된다.

• 디지털산업정보학회논문지
• /
• 제5권3호
• /
• pp.69-75
• /
• 2009

In this paper, we proposed CPLD low power algorithm using reduce glitch power consumption. Proposed algorithm generated a feasible cluster by circuit partition considering the CLB condition within CPLD. Glitch removal process using delay buffer insertion method for feasible cluster. Also, glitch removal process using same method between feasible clusters. The proposed method is examined by using benchmarks in SIS, it compared power consumption to a CLB-based CPLD low power technology mapping algorithm for trade-off and a low power circuit design using selective glitch removal method. The experiments results show reduction in the power consumption by 15% comparing with that of and 6% comparing with that of.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2126-2133
• /
• 2014

We present a scalable object tracking framework, which is capable of removing shadows and tracking the people. The framework consists of background subtraction, fuzzy based shadow removal and boundary tracking algorithm. This work proposes a general-purpose method that combines statistical assumptions with the object-level knowledge of moving objects, apparent objects, and shadows acquired in the processing of the previous frames. Pixels belonging to moving objects and shadows are processed differently in order to supply an object-based selective update. Experimental results demonstrate that the proposed method is able to track the object boundaries under significant shadows with noise and background clutter.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.183-183
• /
• 2018

In this study, 5-bromo-2,9-bis(5,6-diphenyl-1,2,4-triazin-3-yl)-1,10-phenanthroline (5-bromo-Ph4-BTPhen) was synthesized and evaluated for its ability to remove major radionuclides ($Cs^+$, $Sr^{2+}$, and $Co^{2+}$). The synthesized ligand removed both $Sr^{2+}$ and $Co^{2+}$ from $1mg\;L^{-1}$ aqueous solutions with extraction efficiencies of up to 99% at neutral and alkaline pH. The $Sr^{2+}$ and $Co^{2+}$ removal efficiencies decreased as a consequence of the higher bonding strengths of competing metal ions to the N-donor atoms in the cavity of the ligand; competing divalent ions affected the $Sr^{2+}$ and $Co^{2+}$ removal efficiencies more than monovalent ions.

• Membrane and Water Treatment
• /
• 제13권1호
• /
• pp.1-6
• /
• 2022

The regulations of the International Maritime Organization (IMO) have been steadily strengthened in ship emissions. Accordingly, there is a growing need for development of related technologies for the removal of contaminants that may occur during the treatment of SOx and NOx using a wet scrubber. However, this system also leads to wastewater production when the exhaust gas is scrubbed. In this research, we evaluated the performance of an ion selective resin process in accordance with scrubber wastewater discharge regulations, specifically nitrate discharge, by the IMO. Accelerated real and synthetic wastewater of wet scrubbers, contained high amounts of TDS with high nitrate, is used as feed water in lab scale systems. Furthermore, a pilot scale dissolved air flotation (DAF) using microbubble generator with ion exchange resin process was combined and developed in order to apply for the treatment of wet scrubber wastewater. The results of the present study revealed that operating conditions, such as resin property, bed volume (BV), and inlet wastewater flow rate, significantly affect the removal performance. Finally, through a pilot test, DAF with ion exchange resin process showed a noticeable improvement of the nitrate removal rate compared to the single DAF process.

• Journal of Radiation Protection and Research
• /
• 제20권1호
• /
• pp.1-7
• /
• 1995

스트론튬선택성을 갖는 크로마토그래피용 수지인 $Sr-Spec^{TM}$을 이용한 환경시료중 토양시료와 물시료에 대한 방사성 스트론들 분리를 고찰하였다. 이 수지는 질산수용액에서 스트론튬과 큰 결합능력을 가졌으며, 다량의 칼슘원소의 존재에서도 스트론튬분리를 할 수 있는 선택성을 가졌다. 그러나 K나 Ba와 같은 방해원소에 의해서는 스트론튬 추출능력이 감소하였고, 때문에 토양시료중의 스트론튬 분석시에는 이러한 방해원소의 제거단계가 필요하였다. 그러나 물시료증 스트론튬분석에서는 이 수지를 사용함으로써 간편하고 효율높게 분리할 수 있었다.

• 한국환경보건학회지
• /
• 제31권4호
• /
• pp.332-339
• /
• 2005

The environmental regulations in the world has been reinforced and many nations has devoted themselves to the development of cost-effective technology. Selective catalyst reduction(SCR) and selective non-catalyst reduction (SNCR) processes are mainly used to treat nitrogen oxidants generated from fossil-fuel combustion. One of these typical technologies for reduction of do-NOx is SNCR process has increased continuously because of the low cost for building and maintenance. Nevertheless the researches on the application to real scale plant by the reductant like Urea are rarely studied. In this paper, an experimental investigations were performed on the SNCR process in the industrial waste incineration plant. With no reducing agent, the concentration of NOx stayed in around 180 ppm $(O_2\;12\%)$ with the exhausting temperature of $950^{\circ}C$ and changed within the range of 20 ppm to remain relatively consistent. When $10\;wt\%)$ of a solution was added, the efficiency of denitrification reached above $61.4\%$ with the NSR of 2.0 and the exhausting temperature of $950^{\circ}C.$ When the concentration of the urea solution was set to $10\;wt\%$ and the sprinkling to four nozzles, the reaction temperature was reduced to about $50~100^{\circ}C$ with a mixture of $10\;wt\%\;CH_3OH\;and\;5wt\%\;Na_2CO_3$ in $40\;wt\%$ of the solution. The NOx removal efficiency increased to $78.4\%,$ achieving a broader and expansive range of reaction temperatures than the addition of an unmixed pure solution.

• 한국태양에너지학회 논문집
• /
• 제33권3호
• /
• pp.27-35
• /
• 2013

One of the most important factors that have a large influence on performance of the solar water heater system is performance of the solar collector, more detailedly, coating technology on the surface of the solar collector, which can provide high solar absorptance and low emittance. The core of the coating technology is to coat solar selective surfaces. In this study, various performance experiments are carried out using $Cr_2(SO_4)_3{\cdot}15H_2O$ coating technology. Here, IGBT(Insulated Gate Bipolar Transistor) of 5000A-15V was used as the surface processing rectifier which can stably output power and also can control voltage and current. The plating solution mainly contains black chrome$^{+3}$ concentration, H-y Conductivity, N-u Complex, NF Additive and NC-2 Wetter. Before applying the black chrome coating on the copper plate, optimal conditions are provided by using various preprocessing methods such as removal of fat, activation, electrolytic polishing, nickel strike, copper sulfate plating and bright neckel plating, and then the automatic continuous coating experiment are performed according to plating time and cathode current density. In the experiment, after the removal of fat, chemical polishing, nickel strike and activation processes as the preprocessing methods, the black chrome coating was performed in a plate solution temperature of $28^{\circ}C$ and a cathode current density of $18A/cm^2$ for 90 seconds. The thickness of chrome and nickel on the coated plate is $0.389{\mu}m$, $159{\mu}m$ respectively. As a result of the coating experiment, it showed the most excellent performance having a high solar absorptance of 98% and a low emittance of $5{\pm}1%$ when the black chrome surface had a thickness of $0.398{\mu}m$.