• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.204-213
• /
• 2023

Invasive or non-invasive reduction of fractures could be conducted as treatments of traumatic maxillofacial bone fractures. But when suboptimal reduction or malunion of maxillofacial bone fracture occurs, malocclusion could occur as a result of the lost relationship of the mandible and midface. This malocclusion is called post-traumatic malocclusion and orthognathic surgery, orthodontic treatment, selective grinding and prosthetic reconstruction are suggested as treatments for post-traumatic malocclusion after securement of stable TMJ. Stable TMJ is essential for occlusal rehabilitation to prevent occlusal change and relapse of malocclusion. Centric relation and adapted centric posture are suggested as start points of occlusal rehabilitation because they are most stable TMJ position. This case report presents a case in which post-traumatic malocclusion occurred after reduction of panfacial fracture. To rehabilitate full mouth occlusion, selective grinding and prosthetic reconstruction of implant supported fixed prostheses were conducted in centric relation and showed satisfying results in functional and occlusal aspects.

• The Journal of the Korean dental association
• /
• v.25 no.7 s.218
• /
• pp.657-664
• /
• 1987

The purpose of this article is to report a case of internal derangement of TMJ which was successfully managed with surgical and occlusal treatment. The Obtained results were summarized as follow: 1. The patient surgically operated via high condylectomy with meniscoplasty to correct anteriorly displaced meniscus. 2. During operation, the junction area of bilamina zone and meniscus was easily identified and resected using microscopy. 3. The mandible was relocated into therapeutic position with occlusal splint. 4. The occlusal rehabilitation with selective grinding and prosthodontic treatment was done so that the new patient's intercuspal position should correspond to the therapeutic position.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.445-449
• /
• 2012

We investigate the effects of redox reaction on preparation of high purity ${\alpha}$-alumina from selectively ground aluminum dross. Preparation procedure of the ${\alpha}$-alumina from the aluminum dross has four steps: i) selective crushing and grinding, ii) leaching process, iii) redox reaction, and iv) precipitation reaction under controlled pH. Aluminum dross supplied from a smelter was ground to separate metallic aluminum. After the separation, the recovered particles were treated with hydrochloric acid(HCl) to leach aluminum as aluminum chloride solution. Then, the aluminum chloride solution was applied to a redox reaction with hydrogen peroxide($H_2O_2$). The pH value of the solution was controlled by addition of ammonia to obtain aluminum hydroxide and to remove other impurities. Then, the obtained aluminum hydroxide was dried at $60^{\circ}C$ and heat-treated at $1300^{\circ}C$ to form ${\alpha}$-alumina. Aluminum dross was found to contain a complex mixture of aluminum metal, aluminum oxide, aluminum nitride, and spinel compounds. Regardless of introduction of the redox reaction, both of the sintered products are composed mainly of ${\alpha}$-alumina. There were fewer impurities in the solution subject to the redox reaction than there were in the solution that was not subject to the redox reaction. The impurities were precipitated by pH control with ammonia solution, and then removed. We can obtain aluminum hydroxide with high purity through control of pH after the redox reaction. Thus, pH control brings a synthesis of ${\alpha}$-alumina with fewer impurities after the redox reaction. Consequently, high purity ${\alpha}$-alumina from aluminum dross can be fabricated through the process by redox reaction.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.7
• /
• pp.343-352
• /
• 2016

Effects of grinding time and chemicals dosage in arsenic removal from contaminated paddy soil in China were investigated using lab scale attrition and froth flotation combining process. Arsenic concentration in the field soil was 76.51 mg/kg, exceeding Korean and Chinese standards, and predominant arsenic compounds fraction in sequential extraction was "residual" (over 80%). After wet sieving, soil with >2 mm and < 0.038 mm showed concentration lower than 'Warning Level' in Korea. Soil with 0.038-0.075 mm, showing the highest concentration, was discarded since it occupied minor weight fraction (10.1%). Thus soil between 0.075 and 2 mm was only used in the combining process. The highest Arsenic concentration in progeny fragments smaller than 0.038 mm reached up to 981.66 mg/kg after 5 min of attrition. Optimal dosage of collector ($C_5H_{11}OCS_2K$) and modifier ($Na_2S$ and $CuSO_4$) in froth flotation process for the selective separation of the chipped progeny particles from the parent fragments were determined both as 200 g/ton. Arsenic removal efficiency in froth flotation process was 38.47% and it was increased to 72.74% in additional flotation process, scavenging. Average arsenic concentration after overall process - wet sieving, attrition and froth flotation - was estimated to 16.45 mg/kg.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.137-147
• /
• 2017

Sericite is a clay mineral that has a wide applications in the industry, depending on its purity. To maintain sericite's purity as high as possible it is necessary to remove its gangue minerals or control their contents prior to use for high value-added products and applications. In this study, the wet beneficiation of sericite by applying selective grinding and sedimentation techniques, were investigated. The ore mineral was composed mainly of sericite, quartz and calcite. Analysis showed that the content of sericite increased along with the particle size decrease, but the contents of impurity minerals as quartz and calcite were tended to decrease relatively with particle size decrease. The results of liberation tests using an attrition scrubber showed that the increase in residence time and slurry density have increased the generation of fine particles in -325 mesh size range. It was observed, however, that the contents of impurities such as quartz and calcite in such fine particles also increased during prolonged scrubbing. In the dispersed form without breaking, the yield of the recovered concentrate was 15.4 wt% and the $K_2O$ content was 9.84 wt%, after the dispersed slurry was allowed to settle for 20 minutes. On the other hand, the concentrate yield was increased to 23.4 wt% after 10 minute attrition scrubbing and 40 minute sedimentation, while its $K_2O$ content was decreased to 9.71 wt%. Most of final products were observed as platelet-shaped particles containing Si, Al and K which are main component of sericite.

• Journal of Oral Medicine and Pain
• /
• v.14 no.1
• /
• pp.113-121
• /
• 1989

In this study, 94 patients with temporomandibular disorders were interviewed to evaluate the effect of the treatment they received at the department of Oral diagnosis and oral Medicine in Seoul national university Hospital. The treatment administered to the patient were patient education, relaxation procedures, physical therapy, occlusal splint therapy and selective grinding of teeth. The following results were disclosed : 1. 97.9% of the patients reported no pain or considerably less pain than they had reported at their first visits to the department. 2. 89.3% of the patients thought that the treatment provided was either complete or considerably successful. 3. TMJ and facial pain was resolved within average 3.0 months 4. Of the 70 patients who previously reported having jaw joint sound, 34 patients (48.6%) no longer reported int. 5. Of the 48 patients who previously reported having headache regularly, 3 patients (68.8%) no longer reported headache regularly. 6. Of the 66 patients who previously reported having masticatory muscle pain, 41 patients (62.1%) no longer reported masticatory muscle pain. 7. Analysis of the data did not disclose a subgroup or factor, such as age, the stage of internal derangement, capsulitis, bruxism, MPD, duration of symptoms, that could be correlated with the reduction of pain or the patient's perception of success of treatment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.212-225
• /
• 1995

This study was performed in a diatomite factory located at Pohang City, Kyeongsangbuk-Do. The major objectives were to evaluate sampling and analytical methods of diatomaceous earth dust. Concentrations of total and respirable diatomaceous earth dust were measured. Size distribution of dust was analyzed by a personal cascade impactor and the particle size analyzer which is an application of multiple diffraction method. Also crystalline silica in respirable and total dust samples was analyzed quantitatively by X-ray diffraction and Fourie Transform Infrared Spectroscopy(FTIR). The results were as follows: The airborne total and respirable dust concentrations, particle size distribution, and cristalline silica(quartz) concentrations showed approximately a log-normal distribution. The means of totaldust concentrations at flour maufacturing, fire brick grinding and packaging processes exceeded the Korean and American Conference of Governmental Industrial Hygienists standards, $10mg/m^3$. The size distribution of diatomaceous earth dust was log-normal and identified as the rspirable particle mass and thoracic particle mass. The crystalline silica in respirable and total dust samples was identified to quartz and contained about 10 % in those samples. Finally, it is necessary to study the applicability of multiple diffraction for particle size distribution to compare the ACGIH's size selective sampling with other materials containing crystalline silica. Also, advanced quantitative study to X-ray diffraction and FTIR methods shoud be carried out 10 verify general and specific characteristics for respirable crystalline silica.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.305-309
• /
• 2009

Dens evaginatus is a dental anomaly most commonly seen in premolar teeth in which a tubercle or protuberance projects from either the center of the occlusal surface or the buccal triangular ridge. These tubercles are easily fractured from mastication as the tooth erupts and frequently leads to pulp necrosis as a common complication. To prevent these sequelae, prophylactic treatment soon after the tooth starts erupting is essential. These preventive treatments include, selective grinding and protection of the tubercle by pit and fissure sealant. When the tooth does shows signs of pulp necrosis and apical periodontitis, endodontic procedures are needed. Apexification and apexogenesis are usually the treatment of choice for the affected teeth which have immature apices. Apexogenesis is a vital pulp therapy procedure performed to encourage continued physiological development and formation of the root end. It involves removal of the inflamed pulp and the placement of calcium hydroxide on the remaining healthy pulp tissue. This case report describes an atypical apexogenesis of a mandibular premolar which showed to be a dens evaginatus. The tooth which was treated with calcium hydroxide shows good results and is planned for permanent root canal filling.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.357-366
• /
• 2008

Posterior cross-bite is a relatively frequent malocclusion in primary and early mixed dentition and the reported prevalence of posterior cross-bite varies from 7% to 23%. It has been defined as a transverse discrepancy in arch relationship which the palatal cusp of the upper posterior teeth do not occlude in the central fossa of the opposing lower teeth, and can be manifested in a single tooth or in a group of teeth. Posterior cross-bite does not often self-correct and therefore immediate treatment is recommended. Occlusal adjustment to eliminate premature contact that causes mandibular deviation, expansion of narrow maxillary arch, arrangement of the individual teeth to treat asymmetry within the dental arch are the methods of treating cross-bite. In the present case, functional posterior cross-bite was observed in the primary and the early mixed dentition children. The children were treated by the slow maxillary expansion and occlusal adjustment. The outcome of periodic examinations after the correction of cross-bite was favorable.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.1
• /
• pp.50-56
• /
• 2002

This experiment was carried out to obtain some information about overwintering, physiological and ecological characteristics of apple snails. Another purpose of this experiment was to characterize an appetite for rice plants by apple snails and to elucidate their choice of fresh green ones (vegetables, some other crops, weeds in rice fields). The freshwater snails were found with higher population at sites abundant organic compounds such as plant debris and at regions with high temperature. They also prefer calcium-rich water. This is a naturally occurring process. Apple snails were exceptionally veil-adapted to the south regions of Korea, especially Janghang, Jangseong and Haenam, even if the temperature of winter season is cold below 0$^{\circ}C$. Apple snails were not very selective in their food choice and eat almost everything available in their environment. A snail have something called a radula in its mouth for grinding up its food. A apple snail also chews on fruits and young succulent plant barks. In case of reproduction. apple snails deposit about 157$\sim$784 (average of 321 eggs) milky white to pale orange colored eggs above the waterline. In approximately every 22.4 seconds a new egg appears. The total time needed to deposit a egg mass varies from 58 minutes$\sim$4 hours 13 minutes. Apple snails reproduct actively from May to June and from September to October. An appetite of apple snails for rice plants was the different depending on their size and glowing stage for rice plants. Apple snails had a great appetite of rice plants as well as dropwort, tomato, cabbage, radish, aquatic plants etc. They preferred to eat young rice plants and drastically quit eating rice plants of over 40 cm in height. Thus considering the food preference of apple snail for various plants including rice, they were thought to be a potentially strong predator in fields, especially, at regions with warmer winter.