• 태양에너지
• /
• 제4권2호
• /
• pp.29-36
• /
• 1984

This paper reviews the current status of R&D work on selective absorber materials. For the efficient utilization of solar energy, various types of selective absorber materials are being used for solar hot water heaters. Many selective absorbers which have been proposed and designed up to data are classified according to the absorption mechanisms. Temperature-time cycle method is often recommended for the measurement of solar absorptance. In addition, conversion efficiency of the solar collector with selective surface is compared with one with black paint surface.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.355-358
• /
• 2009

This paper presents the technology of selective emitter for high efficiency crystalline silicon solar cell. The effect of selective emitter is analyzed by using the simulation program for solar cell, PC1D. The selective emitter shows better spectral response in short wavelength regions compared to homogeneous emitter. Therefore, the efficiency of solar cell with selective emitter can be improved by changing the sheet resistance from 60 $\Omega/\square$ to 120 $\Omega/\square$. In addition, the power loss of solar cell can be minimized by optimizing width and gap of the finger electrodes on the selective emitter.

• Journal of Biosystems Engineering
• /
• 제32권1호
• /
• pp.37-43
• /
• 2007

This study was carried out to investigate the applicability of PVC membrane-based ion-selective electrodes for macronutrients (K, Ca, and N) by measuring of potassium, calcium, nitrate ions in hydroponic nutrient solution. The capabilities of two ion-selective membranes with varying chemical compositions for each ion were evaluated in terms of sensitivity, selectivity, and lifetime to choose sensing elements suitable for measuring typical ranges of nutrient concentrations in hydroponic solutions. The selected calcium and nitrate ion-selective membranes showed effectively sensitive responses to calcium and nitrate ions with lifetimes of 25 and 15 days, respectively. The addition of a cation additive to the potassium membrane cocktail allowed its sensitivity to be increased whereas its lifetime was reduced from 30 days to 10 days.

• 구강회복응용과학지
• /
• 제37권1호
• /
• pp.39-47
• /
• 2021

의치의 금속구조물을 selective laser melting을 통하여 제작하는 경우 기존의 제작 방식에 비해 여러 기공 과정이 생략되어 시간이 절약되고 간편해진다. 또한 균질한 밀도의 금속구조물을 얻을 수 있어 우수한 기계적 성질, 특히 피로 파절에 대한 높은 저항성을 기대할 수 있다. 본 증례에서는 부분 무치악 환자에서 기존의 방식으로 최종인상을 채득하여 주모형을 제작하였고 이를 스캔하여 데이터화 하였다. 스캔 데이터 상에서 금속구조물을 디자인한 뒤 selective laser melting 방식으로 가철성 국소의치를 제작하였으며 기능적 및 심미적으로 만족스러운 결과를 보였기에 이를 보고하는 바이다.

• 대한방사성의약품학회지
• /
• 제7권2호
• /
• pp.85-91
• /
• 2021

Selective amino acid conjugation of bulky antibodies is a valuable asset for real-time diagnosis and therapy. However, selective conjugation incorporating a chelate-bearing radioactive atom into an antibody without affecting its immunoreactivity is a challenging task. A bifunctional chelator (BFC), a selective amino acid-targeting probe, and a linker have been developed to overcome this problem. Here, we report the synthesis of a novel propylene cross-bridged chelator (PCB)-1,8-N,N'-bis-(carboxymethyl)-1,4,8,11-tetraazacyclotetradecane (TE2A)-luminol BFC via a click reaction and radiolabel it with a ⁶⁴Cu ion for tyrosine-selective conjugation of trastuzumab. In the initial optimization study, we tried different oxidative addition conditions such as electro-oxidation, hemin, horseradish peroxidase, iodogen tube, chloramine-T, and iodo beads. In this study, up to 82% of ⁶⁴Cu-PCB-TE2A-luminol was conjugated with the antibody in an iodo bead-catalyzed oxidative addition reaction with an isolated yield of 24.4%.

• Journal of Microbiology and Biotechnology
• /
• 제9권4호
• /
• pp.504-508
• /
• 1999

This report compares the selective cytotoxic effects of Doenjang fermented by various Bacillus strains (Bacillus sp. SS9, SSA3, and PM3) on human liver cell lines with that of conventional Doenjang (DTY, DTG, and DTK) and commercial Doenjang (DCM, DCD, and DCS). To investigate selective cytotoxic effects of Doenjang extracts, the cell density of HepG2 (Hepatocellular carcinoma) and CCL-13 (cells derived from human normal liver) was estimated after addition of the extracts by using a viable cell counting method. The maximum selectivity ratio ($IC_{50}$value against CCL-13/$IC_{50}$ value aganist HepG2) was observed by PM3 (extracts of Doenjang fermented with Bacillus sp. PM3). As for morphological changes shown by the addition of PM3 into HepG2 and CCL-13 cultures, HepG2 was significantly disrupted, however, CCL-13 was not affected. Also, the growth rate of HepG2 was decreased significantly by the addition of PM3. Consequently, PM3 showed a more detrimental effect on HepG2 than that on CCL-13.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.96-104
• /
• 1998

It was possible to produce W/O/W one step multiple emulsion on the system which satisfied following conditions. 1. 1-5％ of hydrophilic liquid surfactant over HLB20 and lipophilic liquid surfactant which has HLB 3∼5 2. Non wax copolymers as oil thickener 3. More than 0.5％ of carbomer as aqueous thickener 4. The manufacturing process which neutralize the dispersed carbomer (2.0％ in water), after emulsifying. For the selective addition into inner and outer aqueous phase, we melted the glucose in water before emulsifying. Using an Anthrone analysis method, we analyzed the encapsulation yield of glucose in inner water phase. It was possible to raise the water encapsulation yield of the multiple emulsion through the following conditions. 1. Using of anionic hydrophilic surfactant(HLB 40) and lipophilic surfactant (HLB 3∼5) 2. Controlling the ratio of hydrophilic surfactant and lipophilic surfactant 3. Strengthening interface with increase of non wax oil thickener. When the separated adding process of glucose was adopted, approximately 85％ of glucose was added selectively within inner aqueous phase.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.657-662
• /
• 2003

This paper presents a new fabrication method of selective SiGe epitaxial growth at 650 $^{\circ}C$ on (100) silicon wafer with oxide patterns by reduced pressure chemical vapor deposition. The new method is characterized by a cyclic process, which is composed of two parts: initially, selective SiGe epitaxy layer is grown on exposed bare silicon during a short incubation time by SiH$_4$/GeH$_4$/HCl/H$_2$system and followed etching step is achieved to remove the SiGe nuclei on oxide by HCl/H$_2$system without source gas flow. As a result, we noted that the addition of HCl serves not only to reduce the growth rate on bare Si, but also to suppress the nucleation on SiO$_2$. In addition, we confirmed that the incubation period is regenerated after etching step, so it is possible to grow thick SiGe epitaxial layer sustaining the selectivity. The effect of the addition of HCl and dopants incorporation was investigated.

• 한국태양에너지학회 논문집
• /
• 제33권4호
• /
• pp.31-38
• /
• 2013

The chemical composition of the black Cr solar selective coatings electrodeposited were investigated for property analysis by using a XPS(X-ray photoelectron spectroscopy) before and after annealing in air at $300^{\circ}C{\sim}500^{\circ}C$ for 120 hours. Black Cr selective coating exposed by solar radiation for 5 months was compared with annealed sample. In addition, The Cu solar selective coatings were prepared by thermal oxidation method for low temperature application. The samples obtained were characterized by using the optical reflectance measurements by using a spectrometer. Optical properties of oxidized Cu solar coatings were solar absorptance $({\alpha}){\simeq}0.62$ and thermal emittance $({\epsilon}){\simeq}0.41(100^{\circ}C)$. In the as-prepared Cr black selective coating, the surface of the coating was found to have Cr hydroxide and Cr. The Cr hydroxide of the major component was converted to $Cr_2O_3$ or $CrO_3$ form after annealing at $500^{\circ}C$ with the desorption of water molecules. The black Cr selective coating was degraded significantly at temperature of $500^{\circ}C$. The main optical degradation modes of this coating were diffusion of Cu substrate materials.

• 한국미생물·생명공학회지
• /
• 제23권2호
• /
• pp.214-219
• /
• 1995

In fermentation of dairy products, bifidobacteria is used in conjunction with other lactic acid bacteria, such as L. acidophilus, L. bulgaricus and S. thermophilus, rendering the enumeration of bifidobacteria difficult. In order to develop optimum conditions for selective enumeration of bifidobacteria, we examined MIC of several antibiotics against various bifidobacteria and other lactic acid bacteria. The growth of L. acidophilus, L. bulgaricus and S. thermophilus were inhibited by lithium chloride at the concentration of less than 4 mg/ml, whereas growth inhibition of bifidobacteria occurred at concentrations over 6-10 mg/ml. Tetracycline and chloramphenicol were also found to selectively inhibit growth of other lactic acid bacteria at the concentration of 1-3 $\mu$g/ml. Addition of 6 mg/ml lithium chloride, 1 $\mu$g/ml, tetracycline or 3 $\mu$g/ml chloramphenicol to medium was found to be optimal for selective enumeration of bifidobacteria. By using these three inhibitory chemicals in the TPY medium, higher number of bifidobacteria were selectively isolated than with NPNL agar and LP agar.