• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.146-149
• /
• 2004

Porous silicon(PS) as an excellent light diffuser can be used as an antireflection layer without other antireflection coating(ARC) materials. PS layers were obtained by electrochemical etching(ECE) anodization of silicon wafers in hydrofluoric acid/ethanol/de-ionized(DI) water solution($HF/EtOH/H_2O$). This technique is based on the selective removal of Si atoms from the sample surface forming a layer of PS with adjustable optical, electrical, and mechanical properties. A PS layer with optimal ARC characteristics was obtained in charge density (Q) of 5.2 $C/cm^2$. The weighted reflectance is reduced from 33 % to 4 % in the wavelength between 400 and 1000 nm. The weighted reflectance with optimized PS layers is much less than that obtained with a commercial SiNx ARC on a potassium hydroxide(KOH) pre-textured multi-crystalline silicon(mc-Si) surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.97-97
• /
• 2000

In this thesis, the metastable state diamond thin films have been deposited on Si substrates from methane-hydrogen and oxygen mixture using Microwave Plasma Enhanced Chemical Vapor deposition (MWPCVD) method. Effects of each experimental parameters of MWPCVD including methane concentrations, oxygen additions, operating pressure, deposition time, etc. on the growth rate and crystallinity were investigated. SEM, XRD, and Raman spectroscopy were employed to analyze the growth rate and morphology, crystallinity and prefered growth direction, and relative amounts of diamond and non-diamond phases respectively. As a methane concentration below 4%, the deposited films having well-defined facets could be obtained. As the methane concentration increases over 4%, the shape of films gradually changed into a amorphos form. The best crystallinity of the film at 3% in the Raman spectroscopy. Addition of oxygen to the methane-hydrogen mixture gave an improved film crystallinity at 50% oxygen concentration due to its more effectiveness in the selective removal of the non-diamond phased compared to the of H atom. on the contrary, the growth rate generally decreased by oxygen to from the more stable CO and CO2 is responsible for such an effect. Upon increasing the operating pressure and time, increased of growth rate and crystallinity were increased simultaneously.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2007.11a
• /
• pp.129-139
• /
• 2007

Many modalities of treatment for acquired skin hyperpigmentation are available including chemical agents or physical therapies, but none are completely satisfactory. The ideal depigmenting compound should have a potent. rapid and selective bleaching effect on hyperactivated melanocytes, carry no short- or long-term side-effects and lead to a permanent removal of undesired pigment. acting at one or more steps of the pigmentation process. Depigmentation can be achieved by regulating (i) the transcription and activity of tyrosinase, tyrosinase related protein-1 (TRP-1), tyrosinase related protein-2 (TRP-2), and/or peroxidase; (ii) the uptake and distribution of melanosomes in recipient keratinocytes and (iii) melanin and melanosome degradation and turnover of pigmented keratinocytes. One of the interesting point for development of skin whitening agent is Mitf(Microphthalmia-associated transcription factor). Mitf belongs to the basic helix-loop-helix-zip family of trabscription factors and it is crucial as it regulates both melanocyte proliferation as well as melanogenesis and is the major regulator of tyrosinase and the related enzymes (TRPs), as well as many melanosome structural proteins such as pMel17. Recently, we developed MITF-down-regulating agents from natural and synthetic sources, which have anti-melanogenic effect on in vitro and in vivo. We suggested that potent MITF-down regulating agents might be used for skin whitening cosmeceuticals.

• Animal cells and systems
• /
• v.7 no.1
• /
• pp.75-79
• /
• 2003

Highly purified high performance thin layer chromatography (HPTLC) fractions containing a putative calcium influx factor (CIF) were prepared from the Jurkat cells and Xenopus oocytes in which $Ca^{2+}$ stores were depleted by thapsigargin treatment and from the yeast in which intracellular $Ca^{2+}$ stores were also depleted by genetic means. Microinjection of the fractions has been shown to elicit $Ca^{2+}$ dependent currents in Xenopus oocytes. The nature of the membrane currents evoked by the putative CIF appeared to be carried by chloride ions since the current was blocked by the selective chloride channel blocker 1 mM niflumic acid and its reversal potential was about -24 mV. Injection of the calcium chelator 1,2-bis(2-aminophenoxy)ethane-N, N, N',N'-tetraacetic acid (BAPTA) eradicated the current activities, suggesting the current responses are entirely $Ca^2$-dependent. Moreover, the currents were sensitive to the removal of extracellular calcium, indicating the dependence on calcium entry through the plasma membrane calcium entry channels. CIF activities were insensitive to protease, heat, and acid treatments and to Dische-reaction whereas the activities were sensitive to nucleotide pyrophosphatase and hydrazynolysis. The fraction might have a sugar because it was sensitive to Molisch test and Seliwaniff's resorcinol reaction. From the above results, CIF as a small and stable molecule seems to have pyrimidine, pyrophosphate, and a sugar moiety.oiety.

• Journal of Climate Change Research
• /
• v.7 no.2
• /
• pp.137-142
• /
• 2016

To achieve large-scale carbon removals, a carbon offset project based on forest management was designed and its carbon stock change was estimated in this study. The project was designed for 874 hectares of forests in the Jin-An Leading Forest Management Zone. For estimating the carbon stock change of the project, the Korean Forest Carbon Standard and VCS (Verified Carbon Standard) methodologies were applied. Three types of management options were considered in the project : extension of rotation age, conversion to productive forests, and conversion to selective harvesting. The estimated carbon removals from the project designed in this study were $259,936tCO_2$ ($8,664tCO_2$ annually), which is 98% of estimated carbon removals from the entire 69 projects currently registered to the Forest Carbon Offset Registry in Korea. The results of this study showed that a large-scale carbon offset project based on forest management could have a huge potential to produce carbon offset credits.

• Membrane and Water Treatment
• /
• v.10 no.2
• /
• pp.127-137
• /
• 2019

The D2EHPA/TBP co-extractants immobilized PolyHIPE membrane can be used for the selective separation of Mn (II) from Co (II). By solvent-nonsolvent method, D2EHPA/TBP co-extractants can be effectively immobilized into PolyHIPE membrane. The pore structure of PolyHIPE membrane and the presence of TBP enhance the stability of immobilized co-extractants. The optimal operating conditions for the separation of Mn (II) and Co (II) are feeding phase at pH 5.5, sulfuric acid concentration in the stripping phase of about 50 g/L and stirring speed at 400 rpm. The D2EHPA/TBP co-extractants ratio of 5:1 shows synergetic effect on Mn/Co separation factor about 22.74. The removal rate and recovery rate of Mn (II) is about 98.4 and 97.1%, respectively, while for Co (II) the transport efficiency is insignificant. The kinetic study of Mn (II) transport shows that high initial flux, $J_f^o=80.1({\mu}mol/m^2s)$, and maxima stripping flux, $J_s^{max}=20.8({\mu}mol/m^2s)$, can be achieved with D2EHPA/TBP co-extractants immobilized PolyHIPE membrane. The stability and reusability study shows that the membrane can maintain a long term performance with high efficiency. High purity of Co (II) and Mn (II) can be recovered from the feeding phase and stripping phase, respectively.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1991-2003
• /
• 2022

The problem of water contamination by long-living cesium and strontium radionuclides is an urgent environmental issue. The development of facile and efficient technologies based on nanostructured adsorbents is a perspective for selective radionuclides removal. In this regard, current work aimed to obtain the nanostructured magnetic zeolite composites with high adsorption performance to cesium and strontium ions. The optimal conditions of hydrothermal synthesis were established based on XRD, SEM-EDX, N₂ adsorption-desorption, VSM, and batch adsorption experiment data. The role of chemical composition, textural characteristics, and surface morphology was demonstrated. The monolayer ionexchange mechanism was proposed based on adsorption isotherm modeling. The highest Langmuir adsorption capacity of 229.6 and 105.1 mg/g towards cesium and strontium ions was reached for composite obtained at 90 ℃ hydrothermal treatment. It was shown that magnetic characteristics of zeolite composites allowing to separate spent adsorbents by a magnet from aqueous solutions.

• Journal of Korean Society of Water and Wastewater
• /
• v.38 no.2
• /
• pp.95-107
• /
• 2024

This study proposes the use of a cobalt-based Prussian blue analogue (Co-PBA; potassium cobalt hexacyanoferrate), as an adsorbent for the cost-effective recovery of aqueous ammonium ions. The characterization of Co-PBA involved various techniques, including Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, nitrogen adsorption-desorption analysis, and zeta potential. The prepared Co-PBA reached an adsorption equilibrium for ammonium ions within approximately 480 min, which involved both surface adsorption and subsequent diffusion into the interior. The isotherm experiment revealed a maximum adsorption capacity of 37.29 mg/g, with the Langmuir model indicating a predominance of chemical monolayer adsorption. Furthermore, the material consistently demonstrated adsorption efficiency across a range of pH conditions. Notably, adsorption was observed even when competing cations were present. Co-PBA emerges as a readily synthesized adsorbent, underscoring its efficacy in ammonium removal and selectivity toward ammonium.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.2
• /
• pp.85-93
• /
• 2013

This study has been carried out to elucidate the characteristics of the dissolution for Thermal Decomposed Solid Waste of uranium-bearing sludge (TDSW), the removal of impurities by an alkalization in a nitric acid dissolving solution of TDSW, and the selective removal (/recovery) of uranium by an acidification in an carbonate alkali solution, respectively. TDSW generated by thermal decomposition of U-bearing sludge which was produced in the uranium conversion plant operation, was stored in KAERI as a solid-powder type. It is found that the dissolution of TDSW is more effective in nitric acid dissolution than oxidative-dissolution with carbonate. At 1 M nitric acid solution, TDSW was undissolved about 30wt% as a solid residue, and uranium contained in TDSW was dissolved more than 99%. In order to the alkalization for the nitric acid dissolving solution of TDSW, carbonate alkalization is more effective with respect to remove the impurities. At the carbonate alkali solution controlled to about 9 of pH, Al, Ca, Fe and Zn co-dissolved with U in dissolution step was removed about $98{\pm}1%$. On the other hand, U could be recovered more than 99% by an acidification at pH about 3 in a carbonate alkali solution, which was nearly removed the impurities, adding 0.5M $H_2O_2$. It was found that uranium could be selectively recovered (/removed) from TDSW.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.1 s.28
• /
• pp.11-20
• /
• 2004

The purpose of this paper is to evaluate the applicability of GPS data for real-time traffic information collection especially after SA removal. Two major results have been reported. One is the GPS data availability and/or useful data point density for travel time estimation using Circle-X algorithm. 87.23% of data points can be mobilized after SA whereas only 29.94% of data was useful in calculating travel time. The other is the possible reduction of the buffer size that is used for screening the points of all GPS into useful and useless data, respectively. With these outcomes, it is safely expected that the regular GPS alone can provide the data points for real-time travel time estimation instead of the more expensive DGPS system.