• Clean Technology
• /
• v.12 no.2
• /
• pp.87-94
• /
• 2006

The reduction of $SO_2$ to elemental sulfur by CO over a series of iron niobate with nominal Nb/Fe atomic ratios of 1/0, 10/1, 5/1, 1/1, 1/5, 1/10 and 0/1 was studied with a flow fixed-bed reactor. Strong synergistic phenomena in catalytic activity and selectivity were observed for the iron niobate catalysts, and the best catalytic performance was observed for the catalyst with Fe/Nb atomic ratio of 1/1. The active phase of the activated iron niobate catalysts was identified to be $FeS_2$ using XRD and XPS. Selective reduction of $SO_2$ by CO was followed by the COS intermediate mechanism.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.876-885
• /
• 2018

Utilization of spent RHDM(Residue Hydrodemetallation) catalyst as de-NOx SCR(Selective Catalytic Reduction) catalyst was studied by conducting by heptane cleaning and high-temperature roasting for removal of deposited carbon and sulfur. Followed by oxalic acid leaching was carried out for controlling excess vanadium deposited on spent RHDM catalyst in search of appropriate vanadium loadings for the best SCR performance and the leaching conditions are 5~15wt% concentration of oxalic acid and 5min leaching time at $50^{\circ}C$ with the ultra-sonic agitator. De-NOx activities of prepared and commercial SCR catalyst were measured by the atmospheric SCR catalyst performance test unit, their residual content were also carried out by ICP, C&S Analysis and XRF. Acid leaching (AL-10) catalyst showed the highest de-NOx efficiency of all prepared catalysts and the de-NOx efficiency over wash coated catalyst(WC-AL-10) was equivalent to that of commercial SCR catalyst. Therefore the possibility of using as SCR catalyst for each application by adjusting treatment conditions of spent RHDM catalyst was found and further research will be needed in detail for the its commercialization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1923-1930
• /
• 2012

Mn-Cu catalysts were tested for selective catalytic reduction of NOx with NH3. Influence of initial reaction temperature was studied for NOx conversion in which reaction temperature was changed three patterns. NOx conversion of catalysts calcined at 200, 300 and $340^{\circ}C$ was measured during the changing temperature. Hydrogen conversion efficiency of calcined catalysts was also measured in the $H_2$-TPR system. The deactivation effect of $SO_2$ on catalyst was investigated with the on-off control of $SO_2$ supply. The catalyst which calcined above $340^{\circ}C$ was somewhat deactivated with thermal shock. The reason of deactivation was draw from the results of surface area and hydrogen conversion.

• Geophysics and Geophysical Exploration
• /
• v.17 no.3
• /
• pp.171-178
• /
• 2014

Aeromagnetic survey generally require much more pre-processing steps than that of common land survey due to several complex and cumbersome steps included in pre-processing stage. Therefore it is desirable to use specific processing tool especially based on graphic user interface. For this purpose, aeromagnetic pre-processing software based on graphic user interface under the Windows environment, called $KMagLevelling^{TM}$ was developed and briefly introduced. In an aspect of its user-friendliness and originality, three noticeable features of $KMagLevelling^{TM}$ are summarized as the following (1) function of representation and handling for large amount of aeromagnetic data set as a visualization in the form of flight-path (2) function of selective exclusion of unwanted data by using survey area information expressed as polygon, and (3) function of selective removal processing for the irregular flight-path data acquired within the entire survey area by implementing the segmentation of flight-path technique.

• Natural Product Sciences
• /
• v.19 no.4
• /
• pp.290-296
• /
• 2013

In preliminary tests, we examined the effect of several fractions isolated from fermented pine needle extract on pacemaker potentials in cultured interstitial cells of Cajal (ICCs) from the mouse colon using a whole cell patch clamp technique. Among these fractions, Fraction 3 (F3) elicited the most powerful depolarization of membrane. Therefore, the aim of the present study was to investigate the effect of F3 obtained from fermented extract of Pinus densiflora needle on pacemaker potentials in ICCs and to establish its mechanism of action. Colonic ICCs generated spontaneous periodic pacemaker potentials in the current-clamp mode. F3 depolarized the membrane and decreased the frequency and amplitude of pacemaker potentials in a dose-dependent fashion. The F3-induced effects on pacemaker potentials were blocked by methoctramine, a muscarinic $M_2$ receptor antagonist, and by glycopyrrolate, a muscarinic $M_3$ receptor antagonist. The F3-induced effects on pacemaker potentials were blocked by external $Na^+$-free solution and by flufenamic acid, a non-selective cation channel blocker, as well as by the removal of external $Ca^{2+}$ and in the presence of thapsigargin, a $Ca^{2+}$-ATPase inhibitor in the endoplasmic reticulum. Taken together, these results suggest that F3 of pine needle extract modulates the pacemaker activity of colonic ICCs by the activation of non-selective cation channels via muscarinic $M_2$ and $M_3$ receptors. And external $Ca^{2+}$ influx and intracellular $Ca^{2+}$ release are involved in F3 actions on ICCs.

• Journal of Sensor Science and Technology
• /
• v.23 no.3
• /
• pp.211-215
• /
• 2014

The Pt-, Ni- and Cr-decorated tubular $SnO_2$ nanofibers for gas sensors were prepared by the electrospinning of polyvinylpyrrolidone (PVP) nanofibers containing Pt, Ni, and Cr precursors, the sputtering of $SnO_2$ on the electrospun PVP nanofibers, and the removal of sacrificial PVP parts by heat treatment at $600^{\circ}C$ for 2 h. Pt-decorated tubular $SnO_2$ nanofibers showed high response ($R_a/R_g=210.5$, $R_g$: resistance in gas, $R_a$: resistance in air) to 5 ppm $C_2H_5OH$ at $350^{\circ}C$ with negligible cross-responses to other interference gases (5 ppm trimethylamine, $NH_3$, HCHO, p-xylene, toluene and benzene). Cr-decorated tubular $SnO_2$nanofibers showed the selective detection of p-xylene at $400^{\circ}C$. In contrast, no significant selectivity to a specific gas was found in Ni-decorated tubular $SnO_2$ nanofibers. The selective and sensitive detection of gases using Pt-decorated and Cr-decorated tubular $SnO_2$ nanofibers were discussed in relation to the catalytic promotion of gas sensing reaction.

• Journal of Korean Society on Water Environment
• /
• v.30 no.5
• /
• pp.517-523
• /
• 2014

In order to remove both nitrate and sulfate present in the concentrate of RO(reverse osmosis) process, a combined bio-regeneration and ion-exchange(IX) system was studied. For this purpose, both denitrifying bacteria(DNB) and sulfate reducing bacteria(SRB) were simultaneously cultivated in a bio-reactor under anaerobic conditions. When the IX column containing a nitrate-selective A520E resin was fully exhausted by nitrate and sulfate, the IX column was bio-regenerated by pumping the supernatant of the bio-reactor, which contains MLSS concentration of $125{\pm}25mg/L$, at the flowrate of 360 BV/hr. Even though the nitrate-selective A520E resin was used, the breakthrough curves of ionic species showed that sulfate was exhausted earlier than nitrate. The reason for this result is due to the fact that the concentration of sulfate in RO concentrate was 36 to 48 times higher than nitrate. The bio-reactor was successfully operated at a volumetric loading rate of 0.6 g $COD/l{\cdot}d$, nitrate-N loading rate of 0.13 g $NO_3{^-}-N/l{\cdot}d$, and sulfate loading rate of 0.08 g $SO_4{^{2-}}/l{\cdot}d$. The removal rate of SCOD, nitrate-N, sulfate was 90, 100, and 85%, respectively. When the virgin resin was fully exhausted and consecutively bio-regenerated for 2 days, 81% of nitrate and 93% of sulfate were reduced. When the virgin resin was repeatedly used up to 4 cycles of service and bio-regeneration, the ion-exchange capacity of bio-regenerated resin decreased to 95, 91, 88, and 81% of virgin resin.

• Korean Membrane Journal
• /
• v.6 no.1
• /
• pp.10-15
• /
• 2004

We developed a water-selective ceramic composite membrane for use as a dehydration membrane reactor for dimethylether (DME) synthesis from methanol. The membranes were modified on the porous stainless steel support by the sol-gel method accompanied by a suction process. The improved membrane modification process was effective in increasing the vapour permselectivity by removal of defects and pinholes. The optimized alumina/silica composite membrane exhibited a water permeance of 1.14${\times}$10$^{-7}$ mol/$m^2$.sec.Pa and a water/methanol selectivity of 8.4 at permeation temperature of 25$0^{\circ}C$. The catalytic reaction for DME synthesis from methanol using the membrane was performed at 23$0^{\circ}C$, and the reaction conversion was compared with that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor was much higher than that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor and the conventional fixed-bed reactor was 82.5 and 68.0%, respectively. This improvement of reaction efficiency can last if the water vapour produced in the reaction zone is removed continuously.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.137-139
• /
• 2007

Purpose: The mandibular ramus sagittal split osteotomy is a common procedure in cosmetic surgery. A late complication of this procedure, pseudoaneurysm rarely happens. The purpose of this case is to present our experience that is rare late vascular complication after mandibular ramus sagittal split osteotomy. Methods: A 21-year-old male was operated by local plastic surgeon for treatment of mandibular prognathism. After 9 days, the man was transferred to our hospital with persistent bleeding and swelling on the mandibular area. We operated the man three times and failed to control hemorrhage. Therefore, we did angiography and found the pseudoaneurysm on the buccal and pterygoid branches of internal maxillary artery. Then we did selective embolization for removal of the pseudoaneurysm. Results: The man was operated using the therapeutic embolization, and the pseudoaneurysm was removed. The results were successful, and we couldn't find any bleeding and the pseudoaneurysm during the follow-up of 12 months. Conclusion: The selective embolization is the good therapeutic method of late vascular complication after mandibular ramus sagittal split osteotomy.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.200-207
• /
• 2020

In this study, the effect of calcination temperature on the production of RuTi catalyst in NH₃-SCO (selective catalytic oxidation) was investigated. The RuTi catalyst was prepared using the wet impregnation method, and calcined at 400~600 ℃ for 4 h in air condition. The catalysts were named RuTi x00 where x00 means the calcination temperature. According to XRD (X-Ray diffraction), TEM (transmission electron microscope), H₂-TPR (H₂-temperature programmed reduction) analyses, RuTi x00 catalysts displayed that the dispersion of active metal decreased via increasing the calcination temperature. The catalysts with low dispersion showed a decrease in the surface adsorption oxygen species (O_β) and NH₃ adsorption amount via XPS, and NH₃-TPD analyses. Therefore, the RuTi 400 catalyst was well dispersed in the active metal on TiO₂ surface, and also, the NH₃ removal efficiency was excellent.