• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.91-97
• /
• 2018

This paper presents implementation possibilities of digital IoT doorlock systems via VLC(Visible Light Communication)'s color grid. The color grid-based VLC modulation scheme which are discussed in this paper utilize the straightness of light and abundant frequency resources which are the properties of the light. Performance results in this paper are compared to that of conventional modulations with Bit Error Rate (BER) and Signal to Noise Ratio (SNR) simulations. With respect to a channel model, the proposed modulation schemes select the nearest Line Of Sight (LOS) except Non Line Of Sight (NLOS). Experiments in this paper show error rates of received symbols by changing power dB at a distance of 3m between Tx and Rx in an indoor environment. Through performance results and experiments, this paper demonstrates superiority of the proposed color grid-based modulation schemes.

• The Journal of Korean Society for School & Community Health Education
• /
• v.20 no.2
• /
• pp.81-91
• /
• 2019

Objectives: It helps dental clinic to work 1:1 consulting and select the properties of the Kakao Talk message. The study was designed to determine the influence of users cognitive and emotional responses by message attribute that affect intention of use of dental clinic. Methods: This study targeted 297 peple Kakao Talk users aged 20-50 s, in Seoul, Gyeonggi-do and Incheon from, February 6 to April 7, 2017. We analyzed the data with frequency analysis, t-test, one-way ANOVA, and multiple regression analysis by using SPSS ver 24.0(SPSS Inc, Chicago, USA). The significance level for significance was set at 0.05. Results: Among the user's responses about the event type Kakao talk message, the ease(${\beta}=0.121$, p<0.01), usefulness(${\beta}=0.148$, p<0.001), affinity(${\beta}=0.471$, p<0.001), satisfaction(${\beta}=0.249$, p<0.001). affected intention of use of dental clinic. Among the user's responses about the dental information type, the ease(${\beta}=0.150$, p<0.05), expertise(${\beta}=0.151$, p<0.05), satisfaction(${\beta}=0.237$, p<0.001) affected intention of use of dental clinic(p<0.05). Among the user's responses about the general public relations type, the expertise(${\beta}=0.254$), affinity(${\beta}=0.193$), satisfaction(${\beta}=0.474$) affected intention of use of dental clinic(p<0.001). Conclusion: It is necessary to elicit a positive intention of use of dental clinic through a highly emotional response from the users to improve the image of the dental clinic and to attract patients.

• Korean Journal of Heritage: History & Science
• /
• v.36
• /
• pp.69-86
• /
• 2003

This article introduce the manufacturing technique of Silla potteries based on the result excavated from Songogdong and Mulchunri site in Gyungju. As a result, we selected the kiln-site to produce Silla potteries and knew the feature which following to make them. 1. The Environmental elements to take a kiln-site were abundant fuel, plenty water and suitable soil. In particular, efficient usage of refracted winds and reserved space of forepart in the kiln-site were importantly applied to select place of kiln-site. 2. The structure of the kiln-body have been changing according to the time. It could be massproduced by produce-group from the middle and end of sixth centry which the fireplace-kiln was generalized. 3. The work center of equipments were related kiln-site. It consisted of mixed wheel, keepingpit and ditch. We knew that a look-out shed had been appeared according to utility purpose variously. 4. It sees as trimming trace of inner and outter aspects in excavated potteries and we knew that wheel had been turn to the contrast watch direction. For producing pottery of the good guality, various kiln-tools had been used already at Silla period and they used for the different purpose. 5. We intended to know method for laying the potteries in the kiln through the example of the adherent pottery to be melted. Finally, manufature and tomb-site are separated by the time through current situation of Songokdong and Mulchonri site. At the same time, we could know that group of Chounbuk kiln-site moved from the south to the north step by step.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.1
• /
• pp.40-44
• /
• 2019

This study investigates mixtures of water and cryoprotectant agents (CPAs) to store high-grade cold energy. Although water is an ideal material for a cold thermal storage (CTS) due to its high specific heat, undesirable volume expansion may cause structural stresses during freezing. The volume expansion can be alleviated by adding the CPAs to water. However, the CPA aqueous solutions not only have different thermal properties but also transit to amorphous state different from pure water. Therefore, these characteristics should be considered when using them as material of the CTS. In experiments, glycerol and dimethyl sulfoxide (DMSO) are selected as the candidate CPA. The volume expansion of the solution is measured by an in-situ strain gauge in low temperature region. The specific heat capacity of the solution is also measured by differential scanning calorimetry (DSC). Both the amount of volume expansion and the specific heat capacity of the CPA aqueous solution decrease in the case of higher concentration of CPA. These characteristics should be contemplated to select optimal aqueous solution for CTS for liquid air energy storage system (LAES). The CPA solutions have advantages of having wide temperature range to utilize the latent heat of water and higher sensible heat of the CPA. The CPA solutions which can satisfy the allowable stress of the structure are determined. Consequently, among the CPA solutions investigated, DMSO 20% w/w solution is the most suitable for the CTS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.5
• /
• pp.659-666
• /
• 2021

This research will apply the environmental characteristics of physical computing to game development, which has the concept of giving substantial materiality to digital media that do not exist in reality. The processing process of physical computing is digital input and digital output, and analog input and analog output, which mainly uses Malik controllers. Therefore, we select development elements by analyzing research cases in the field of digital art and information education where physical computing is studied a lot, and by analyzing games that borrowed some physical computing elements. The derived elements are verified by the Delphi's research methodology through agreement with experts. 12 elements are selected in this study, and the importance is shown in order of the physical properties in the virtual world, the suitability of the implementation technology, and the conformity between real and virtual players.

• Structural Engineering and Mechanics
• /
• v.83 no.3
• /
• pp.293-304
• /
• 2022

In this work, a novel reliability approach for combined high and low cycle fatigue (CCF) estimation is developed by combining active learning strategy with least squares support vector machines (LS-SVM) (named as ALS-SVM) surrogate model to address the multi-resources uncertainties, including working loads, material properties and model itself. Initially, a new active learner function combining LS-SVM approach with Monte Carlo simulation (MCS) is presented to improve computational efficiency with fewer calls to the performance function. To consider the uncertainty of surrogate model at candidate sample points, the learning function employs k-fold cross validation method and introduces the predicted variance to sequentially select sampling. Following that, low cycle fatigue (LCF) loads and high cycle fatigue (HCF) loads are firstly estimated based on the training samples extracted from finite element (FE) simulations, and their simulated responses together with the sample points of model parameters in Coffin-Manson formula are selected as the MC samples to establish ALS-SVM model. In this analysis, the MC samples are substituted to predict the CCF reliability of turbine blades by using the built ALS-SVM model. Through the comparison of the two approaches, it is indicated that the reliability model by linear cumulative damage rule provides a non-conservative result compared with that by the proposed one. In addition, the results demonstrate that ALS-SVM is an effective analysis method holding high computational efficiency with small training samples to gain accurate fatigue reliability.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.359-370
• /
• 2022

Objective: This study is intended to design a commercially available passive sampler and conduct performance test on its use as a media for evaluating a working environment. Methods: This study was conducted to select adsorbents, design models, and evaluate storage stability and sampling rates for the development of new types of passive samplers. Results: The impurity detection, adsorbent capacity and breakthrough volume of five types of activated carbon were tested for selection of an adsorbent. One product was selected in consideration of the efficiency of purchase. A number of passive samplers were designed in a radial style and a badge style using plastic as a material. The final two prototypes were made using molds or 3D printing. For the storage stability evaluation, samples were stored at different temperature for 1~21 days and then analyzed. Most of the chemicals had excellent storage stability when refrigerated. However, some chemicals such as dichloromethane and methyl ethyl ketone need to be analyzed as soon as possible after sampling. Conclusion: In this study, new types of passive samplers for 66 chemical compounds were developed. The evaluation of storage stability and sampling rates showed different results depending on the properties of the chemical substance. For some chemicals such as methyl ethyl ketone and dimethylformamide, activated carbon is inappropriate as an absorbent. In future studies, additional experiments are required on chemicals that are difficult to collect with activated carbon.

• Analytical Science and Technology
• /
• v.20 no.5
• /
• pp.442-447
• /
• 2007

The properties of garlic (Allium sativum L.) are attributed to organosulfur compounds. In this paper, an analytical technique with a rapid and simple sample preparation procedures for determination of diallyl disulfide (DADS) in garlic was reported. The DADS was simply extracted with various solvents (methanol, benzene or tetrahydrofuran) from garlic and prepared for HPLC analysis. From the results, the methanol was select as an optimal extraction solvent. The mobile phase was composed from methanol and water, and the gradient elution mode was applied. 0.61 mg of DADS per g garlic powder can be extracted with methanol. This work offers some advantages over the currently accepted techniques and would be useful for chemical and biological studies of garlic and its products.

• International Area Studies Review
• /
• v.15 no.1
• /
• pp.571-583
• /
• 2011

We use the properties of competitive location equilibrium to study the relationship between the demand for education and the choice of primary residential location. Consumers can work and live in a comparatively high wage place where there are few education opportunities, or live in a place where education is available and commute to work. If education and employment are each location-specific, there are pooling equilibria in which consumers locate according to their preference for education. In general, the stronger the taste for education, the greater the attraction of living close to the education site and the lower the demand for other goods, including housing. Exploring the effects of the model parameters on the spatial distribution of consumers, we find that a higher frequency of trips taken to the education site, a shorter distance between the work place and the education site, or a greater out-of-pocket education cost each leads to a wider range of consumer types selecting to reside at the education location. We also find that a higher wage lowers the range of consumers who select to live near the education site.

• Journal of The Korean Astronomical Society
• /
• v.56 no.1
• /
• pp.97-115
• /
• 2023

We present the deep homogeneous UBV RI photometric data of 135,071 stars down to V ~ 23 mag and I ~ 22 mag toward the Carina Nebula. These stars are cross-matched with those from the previous surveys in the X-ray, near-infrared, and mid-infrared wavelengths as well as the Gaia Early Data Release 3 (EDR3). This master catalog allows us to select reliable members and determine the fundamental parameters distance, size, stellar density of stellar clusters in this star-forming region. We revisit the reddening toward the nebula using the optical and the near-infrared colors of early-type stars. The foreground reddening [E(B-V)_fg] is determined to be 0.35 ± 0.02, and it seems to follow the standard reddening law. On the other hand, the total-to-selective extinction ratio of the intracluster medium (R_V,cl) decreases from the central region (Trumpler 14 and 16, R_V,cl ~ 4.5) to the northern region (Trumpler 15, R_V,cl ~ 3.4). It implies that the central region is more dusty than the northern region. We find that the distance modulus of the Carina Nebula to be 11.9 ± 0.3 mag (d = 2.4 ± 0.35 kpc) using a zero-age main-sequence fitting method, which is in good agreement with that derived from the Gaia EDR3 parallaxes. We also present the catalog of 3,331 pre-main-sequence (PMS) members and 14,974 PMS candidates down to V ~ 22 mag based on spectrophotometric properties of young stars at infrared, optical, and X-ray wavelengths. From the spatial distribution of PMS members and PMS candidates, we confirm that the member selection is very reliable down to faint stars. Our data will have a legacy value for follow-up studies with different scientific purposes.