• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.464-468
• /
• 2000

This paper presents the optimization technique to select the design parameters of a hydraulic servo valve using the genetic algorithm. The dynamic performance is governed by the design parameters of the servo valve and they may be select by repeated number of simulations such that the desired performance is obtained. Using the genetic algorithm to optimize the design parameters, effective method is suggested. This method can be used for the design of the hydraulic systems as well as the servo valve.

• Communications for Statistical Applications and Methods
• /
• 제7권3호
• /
• pp.759-766
• /
• 2000

In order to design fractional factorial experiments which include some debarred combinations, we should select defining contrasts so that those combinations are to be excluded. Choi(1999) presented a method of selectign defining contrasts to construct orthogonal 3-level fractional factorial experiments which exclude some debarred combinations. In this paper, we extend Choi's method to general p-level fractional factorial experiments to select defining contrasts which cold exclude some debarred combinations.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권1호
• /
• pp.117-124
• /
• 2010

교량은 도로나 철도 네트워크를 구성하는 중요한 사회기반시설로 부재의 파손으로 인한 보수, 보강, 교체에 따른 교통통제나 갑작스런 붕괴 등이 발생할 경우 사회경제적으로 커다란 손실과 인명사상을 유발하기 때문에 일정한 안전수준 이상으로 관리되어야 한다. 사용연수의 증가에 따라 열화 손상되거나, 사고, 천재지변 등으로 인해 문제가 발생한 교량의 성능을 회복시키기 위하여 다양한 보강 공법들이 연구되고 있다. 그러나 어떤 공법을 사용하는 것이 합리적인가에 대한 판단기준 없이 의사결정을 수행하고 있는 실정이다. 따라서 본 논문에서는 개략 설계된 여러 보강대안 중 최적 보강공법을 선정하는 문제를 해결하기 위해, 의사결정인자를 도출하고 불확실성을 고려한 정량적 평가 및 의사결정방법을 제안하였으며, 이를 간략한 예제에 적용하여 개발된 모델의 합리성 및 적용성을 검토하였다. 본 연구에서 제안된 방법론은 불확실성이 존재하는 대안들 가운데 최적의 대안을 선택하는 분야에 응용하여 적용할 수 있을 것으로 기대된다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.291-294
• /
• 2001

This study has established an appraisal standard to select VE subject when they evaluate of design VE by using of a qualify model in an early design step and has suggested an improvement method for importance's estimation method of an appraisal standard. An importance's estimation method is to arrangement of geometric average method using an AHP method to this study, When an evaluation of a quality model, we estimate an importance by establishing of an appraisal standard of economics, construction, security, environmental influence, maintenance, etc.

• Clinical and Experimental Reproductive Medicine
• /
• 제26권2호
• /
• pp.257-263
• /
• 1999

It is well known that discard of seminal plasma from the semen and separation of motile sperm should be preceded before insemination for IUI or IVF. Till now, more than ten kinds of semen treatment methods have been developed. Of those, swim-up and Percoll methods have been used widely in ART laboratories as a routine semen treatment methods because of its advantages. However, there are reports that Percoll can make a genetic trouble because of its chemical structure and therefore the necessity has been arisen to substitute Percoll for other equivalent materials. This study was performed to evaluate the effects of three different sperm preparation methods (swim-up, Percoll and Sil-Select) on sperm motility, sperm recovery rate and fertilization rate. Also, the feasibility of using Sil-Select instead of Percoll in ART was evaluated. Each semen samples were divided into three fractions and motile sperm were recovered by swim-up, Percoll and Sil-Select gradient centrifugation methods. Normal and sub-normal criteria of fifteen semen samples and seventeen IVF cycles were included in these study. As results, no significant difference was found in sperm recovery rate in normal semen treated by a Swim-up, Percoll and Sil-Select method ($13.2{\times}10^6,\;17.5{\times}10^6\;and\;17.7{\times}10^6$ respectively). The initial sperm motility was 61.9% and this increased to 87.1%, 92.6% and 89.5% through Swim-up, Percoll and Sil-Select treatment, respectively. Higher motility was observed in Percoll and Sil-Select treated groups (81.5%, 79.2%, respectively) than swim-up group (66.8%) after incubation for 24hrs. In sub-normal group, sperm recovery rates were higher in Sil-Select group $(2.9{\times}10^6)$ than Percoll gradients group $(1.8{\times}10^6)$. In IVF cycles, the outcomes of fertilization using sperm treated by swim-up and Sil-Select group were similar (82.2%, 79.7% respectively). In conclusion, our results indicate that Sil-Select can be used as a substitute material for sperm preparation instead of Percoll.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.106-109
• /
• 2008

Piecewise linear diode models are widely used for large-signal circuit analyses, especially power electronic circuit simulations. When using a piecewise linear diode model for simulation, a switching method to select a proper one among linear models is needed. The conventional switching method keeps the previous ON, OFF state information, and applies different switching conditions according to the state. However, this method has difficulties especially in extending to multi-piecewise linear models. This paper presents a switching method which appropriately divides the v-i plane into regions and select a linear model according to the region where the operating point(the voltage and the current of the diode) belongs. This switching method is easily extended to multi-Piecewise linear models. An example using the tableau analysis and the backward Euler integration is presented for verification.

• 대한음성학회지:말소리
• /
• 제66호
• /
• pp.87-103
• /
• 2008

We describe a new active learning method in conditional random fields (CRFs) framework for keyphrase extraction. To save elaboration in annotation, we use diversity and representative measure. We select high diversity training candidates by sentence confidence value. We also select high representative candidates by clustering the part-of-speech patterns of contexts. In the experiments using dialog corpus, our method achieves 86.80% and saves 88% training corpus compared with those of supervised method. From the results of experiment, we can see that the proposed method shows improved performance over the previous methods. Additionally, the proposed method can be applied to other applications easily since its implementation is independent on applications.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.205-211
• /
• 2008

Recently, selects method of waterproofing where is suitable with method and material physical properties, construction technique, Productive technique and specifications and maintenance techniques evaluation for the same evaluation method is coming to be presented. Respects the application which select system is substantial objectively reflects a weight to evaluation item the research for is necessary. This research the evaluation which in order is effective and the decision-making to be possible about technically countermeasures for a quality security from waterproofing materials, method selection processes, clearly responsible dividing of construction and maintenance techniques. A sets weight of evaluation item for right select system, it stratify the causes which affect in priority based on AHP.

• 한국건축시공학회지
• /
• 제2권1호
• /
• pp.147-154
• /
• 2002

In the Past, The selection of individual method of construction was done by head of construction site or an experienced person very frequently. By doing this, The wrong selection of construction method without exact adjudication of construction site situation lead to increasing of cost and extension of construction term. Finally it will effect all over the construction process. Especially, In case of underground construction in the beginning, there are a lot of a variable factor and it also effect on the entire construction process and it need very careful process. The purpose of this study is to present the best suitable methodology for selection of construction method by considering potential risk of construction method and variables together with external condition for underground construction. The purpose of this study Is to select the most suitable construction method by analysing potential conditions(construction site situation and client request in designing ) To do this, We prepared arrangement rule to arrange the conditions for construction method. And thin make checklist of the analyzing construction method. Though above process, To expect the risk of individual construction method using above risk checklist and using Analytic Hierarchy process among Multiple-Criteria Decision making, the professional opinions is to be adapted. By doing this, it can lead and select the most suitable construction method considering the data which get from risk density test.

• 수산해양기술연구
• /
• 제40권4호
• /
• pp.247-254
• /
• 2004

동해안의 연안성 어족인 빨간횟대에 대해 망목크기 등을 달리한 8종류의 장구형 통발을 사용하여, 2003년 6월부터 12월까지 총 6차례에 걸쳐 어선 2척을 용선하여 조업한 어획실험으로부터 망목선택성 곡선을 구하여 합리적인 자원관리에 대한 기초 자료를 구하고자 하였다. 망목 크기가 20mm와 35mm인 두 통발의 빨간횟대 어획물로부터 체장에 따른 어획비율의 차이에 대해 특별한 경향을 발견할 수 없었다. 망목 크기가 20mm와 55mm인 두 통발의 경우에 대해 SELECT방법을 이용하여 equal split model 과 estimated split model을 적용한 결과, AIC 값이 적은 전자가 더 적절한 모델이므로, 빨간횟대의 경우는 이들 두 통발에 대한 입망률의 차이는 없는 것으로 나타났다. 망목 55mm의 통발에서 SELECT 모델로 구한 50% 어획될 빨간횟대의 전장은 22.0cm였다. 망목 크기가 20mm, 35mm, 55mm인 통발의 어획 자료에 Kitahara의 방법으로 logistic식을 적용하여 추정된 선택성 곡선식은 $s(R)\;=\;\frac{1}{1+exp(-0.3545R+2.141)$와 같았고, 현재 규정 망목 크기인 35mm 장구형 통발에 대해 50% 어획될 빨간횟대의 전장은 21.4cm이었다.