• The Korean Journal of Ecology
• /
• 제12권1호
• /
• pp.21-35
• /
• 1989

It was found that seed germination and seedling growth of selected species were inhibited by phytotoxic substance released from black pine. The longer was the aqueous extraction time of black pine needles, the smaller was the relative germination and growth of the species were inhibited in aqueous leachate and rain leachate as well as in soil underneath the black pine trees. In addition, the growth of lettuce was suppressed in volatile substances from black pine needles. To detect phytotoxic substances of black pine needles, paper chromatography and high performance liquid chromatography were used and fourteen kinds of KDICical compounds were isolated and identified as phenolic acids including benzoic acids. The growth of lettuce was inhibited in the experiment using reagents identical to these KDICical substances and a great inhibition was observed in the concentration of less than 5$\times$ M.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.211-217
• /
• 2011

The dynamic response of a multi-MW wind turbine to a sudden change in wind speed is usually slow, because of the slow pitch control system. This could cause a large excursion of the rotor speed and an output power over the rated. A feedforward pitch control can be applied to minimize the fluctuations of these parameters. This paper introduces the complete design steps for a feedforward pitch controller, which consist of three stages, i.e. the aerodynamic torque estimation, the 3-dimensional lookup table for the wind seed estimation, and the calculation of the feedforward pitch amount. The effectiveness of the feedforward control is verified through numerical simulations of a multi-MW wind turbine.

• 한국멀티미디어학회논문지
• /
• 제23권5호
• /
• pp.633-640
• /
• 2020

Defect region segmentation of TFT-LCD images is performed by combining defect pixels detected by a defect detection method into defect region, or by using morphological operations to segment defect region. Therefore, the result of segmentation of the defect region is highly dependent on the defect detection result. In this paper, we propose a method which segments defect regions sequentially according to the possibility of being included in defect regions in TFT-LCD images. The proposed method repeats the process of detecting a seed using the median value and the median absolute deviation of the image, and segments the defect region using the seeded region growing method. We confirmed the superiority of the proposed method to segment defect regions using pseudo-images and real TFT-LCD images.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.297-299
• /
• 2003

In this paper, we present the fabrication of copper electrode array and test of electrochemical discharge machining for the fabrication of microholes on Borofloat33 glass. Copper electrode array is fabricated by the bonding of silicon upper substrate and lower substrate and copper electroplate. The silicon upper electrode having microholes fabricated by ICP-RIE is the mold of copper electroplate. The lower substrate is used as the seed layer for copper electroplate after Au - Au thermocompression bonding with the upper substrate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1133-1137
• /
• 1995

This paper presents a numerical method of the global search for an optimal geometric path for a manipulator arm amid obstacles. Finite term quintic B-splines are used to describe an arbitrary point-to-point manipulator motion with fixed moving time. The coefficients of the splines span a linear vector space, a point in which uniquely represents the manipulator motion. All feasible geometric paths are searched by adjusting the seed points of the obstacle models in the penetration growth distances. In the numerical implementation using nonlinear programming, the globally optimal geometric path is obtained for a spatial 3-link(3-revolute joints) manipulator amid several hexahedral obstacles without simplifying any dynamic or geometric models.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.49-53
• /
• 1997

In this paper, YbBa$_{2}$Cu$_{3}$O$_{x}$ superconductor was sintered by means of conventional solid reaction and the textured YbBa$_{2}$Cu$_{3}$O$_{x}$ was prepared by the Melted-Condensed Process in which SmBa$_{2}$Cu$_{3}$O$_{x}$ crystal was used as seed crystal to introduce the YbBa$_{2}$Cu$_{3}$O$_{x}$ crystal growth. The texture of YbBa$_{2}$Cu$_{3}$O$_{x}$ was examined by X-ray diffraction, and the fracture of YbBa$_{2}$Cu$_{3}$O$_{x}$ sample was observed by SEM, which proved the sample was well oriented. After oxygen absorption of the textured YbBa$_{2}$Cu$_{3}$O$_{x}$ sample, it's critical temperature was measureed to be 86K.eed to be 86K.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2010-2014
• /
• 2005

Object detection and parameter estimation in point cloud data is a relevant subject to robotics, reverse engineering, computer vision, and sport mechanics. In this paper a software is presented for fully-automatic object detection and parameter estimation in unordered, incomplete and error-contaminated point cloud with a large number of data points. The software consists of three algorithmic modules each for object identification, point segmentation, and model fitting. The newly developed algorithms for orthogonal distance fitting (ODF) play a fundamental role in each of the three modules. The ODF algorithms estimate the model parameters by minimizing the square sum of the shortest distances between the model feature and the measurement points. Curvature analysis of the local quadric surfaces fitted to small patches of point cloud provides the necessary seed information for automatic model selection, point segmentation, and model fitting. The performance of the software on a variety of point cloud data will be demonstrated live.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.557-560
• /
• 1998

In this paper, we presetn the WWW (world-wide-web) base dtelePACS, which uses the communication network as asymmetric satellite data communication system (ASDCS). Web-based telePACS is imple-mented with JAVA language. Through the internet, web-based TelePACS can make it possible for remote hospital or doctor to access PACS data and information easily and cheaply. The ASDCS uses receive-only satellite links for data delivery and PSTN (Public switched telephone Network) modem or N-ISDN (narrow band integrate services digital network) for communication. The satellite communication linking shows the very high-seed performance such as 10-30 times faster than the modem linking.To solve the speed limits of internet, JPEG and wavelet compression methods were adapted in WWW-based TelePACS and were evaluated by PSNR (peak signal-to-noise ratio) and by radiological experts that 10:1 or less JPEG and wavelet compression may be acceptable for diagnostic purposes. Consequently, we get the conslusion that our system is suitable for tele-radiology and telemedicine world widely.

• Food Science and Biotechnology
• /
• 제14권2호
• /
• pp.268-274
• /
• 2005

Novel antimicrobial substance was isolated from seed coat of Canavalia gladiata by extraction with 75% methanol. Isolation and purification were conducted with solvent fractionation and chromatography on silica gel and sephadex LH-20 columns. Each fraction of antimicrobial activity was tested by paper disc method. Single compound was obtained from the 4th fraction of sephadex LH-20 column chromatography using chloroform/methanol (1:4, v/v), and identified as 3,4,5-trihydroxybenzoic acid methyl ester (methyl gallate) based on HPLC, GC/MS, FT-IR, $^1H$ NMR, and $^{13}C$ NMR analyses. This is the first report describing the presence of methyl gallate in C. gladiata.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권4호
• /
• pp.387-392
• /
• 1995

Though a variety of non-conventional feedstuffs have been successfully evaluated in research stations in Asian countries, there had been little adoption of these technologies at the small farm level. The methodology and results of three separate on-farm trials evaluation the possible use of some non-conventional feedstuffs in broiler diets under small farm conditions in Sri Lanka are reported in this paper. In all trials, the commercial mash, that in normally used in the farms, served as the control. In trials 1 and 2, 5 and 10% cassava leaf meal, respectively, was substituted (w/w) for the commercial mash and fed to broilers for six weeks. In trial 3, several non-conventional feedstuffs (cassava leaf meal, rubber seed meal, ipil ipil leaf meal and died poultry manure) were substituted (w/w) for the commercial mash at levels of 15-20%. The results demonstrated that these non-conventional feed resources can be used in broiler diets under small farm conditions, with no adverse effects on performance. The salient features of on-farm animal research are highlighted.