• The Journal of the Acoustical Society of Korea
• /
• v.33 no.1
• /
• pp.1-9
• /
• 2014

Coastal water including estuaries has distinctive environmental characteristics where sediments are transported and deposited by flowing river water, providing an environment in which fluid mud layers can be formed. Acoustic method is mostly used to detect or monitor the fluid mud layer. However, since sound propagating in this layer suffers severe attenuation, it is important to estimate the accurate attenuation coefficient for various concentrations of fluid mud layer for the successful use of the acoustic method. In this paper, measurement results of attenuation coefficient for 3.5, 5, and 7.5 MHz ultrasounds were presented. The measurements were made in a small-size water tank in which suspended sediment samples with various sediment concentrations were formed using kaolinite powder. The results were compared to the model predictions obtained by attenuation coefficient model in which the mean grain size (called as Mass-median-diameter, D50) was used as input parameter. There were reasonable agreements between measured attenuation coefficients and model outputs predicted using the particle range of D50 ${\pm}20%$. The comparison results imply that although the suspended sediments consist of various-sized particles, sound attenuation might be greatly influenced by amount of particle with a size which has a larger attenuation than that of any particle in the suspended sediments for the frequency used.

• Journal of the Korean earth science society
• /
• v.18 no.6
• /
• pp.540-552
• /
• 1997

For the scientific and systematic study of sediment deposits along Yeongsan river, total 13 core samples were taken from Yeongsan river. The thickness of sediment deposits is 22.0m at YS 1, 20.0m YS 2, 18.5m YS 3, 12.0m YS 4, 3.0m YS 5, 5.5m YS 7, 3.0m YS 8, 5.9m YS 9, 5.0m YS 10 on main stream of Yeongsan river. The thickness of deposit is increasing from upstream to downstream. The composition of sediments dominates sandy gravel on the upstream and the lower part on the downstream, and mud deposits of $11m{\sim}16m$ thick on the upper part of on the downstream(YS 1, YS 2, and YS 3). Contents of organic carbon and calcium carbonates occur being contrary to each other toward upstream. The content of organic carbon increases upstream, that of calcium carbonates decreases. According to size analysis of sediment, the content of gravel increases and mud decreases from downstream to upstream. Sediment deposits can be divided into two types whether gravel is or not. But this boundary is clear in the downstream(YS 1$\sim$YS 4) but is vague in the upstream. The result of this study could be provided engineering, environment, and architecture with geological background as the essential basis.

• Journal of the korean society of oceanography
• /
• v.34 no.2
• /
• pp.122-131
• /
• 1999

This study examined the relationship between the sediment pollution and the occurrence of polychaetes in a heavily polluted saltwater lake, Lake Shihwa on the west coast of Korea, separated from the sea by a dike in 1994. The species composition of polychaete assemblage was compared with that found off the lake in Kyeonggi Bay. Environmental variables investigated both in and off the lake were the grain size distribution, chemical oxygen demand(COD) and metal concentrations (Al, Fe, Mn, V, Co, As, Pb, Cr and Cu) in the sediment. We sampled sediments at 10 stations in the lake and 25 stations in Kyeonggi Bay using a modified van Veen grab. The levels of COD, chromium, and copper in sediments were much higher in Lake Shihwa than in Kyeonggi Bay. Differences in the species composition were found along the pollution gradient. An azoic zone was observed in the most heavily polluted area at the upper reach of the lake and the Polydora ligni zone in the center of the lake. Bottom fauna were diverse in Kyeonggi Bay; however, Heteromastus filiformis predominated in the organically enriched sediment. The density of dominant species differed along the pollution gradient. The highest density or H. filiformis was round at the COD level or around 5.8 mg/g. The COD level in the sediment where P. ligni predominated was tow-fold higher than that where H. filiformis occurred in large numbers. The chromium and copper contents at which P. ligni showed a maximum abundance were 120 mg/kg and 127 mg/kg, respectively. The density of H. filiformis was highest at concentrations of 56 mg/kg chromium and 13 mg/kg copper.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.597-610
• /
• 1997

One-dimensional numerical models using finite difference methods for unsteady sediment transport on alluvial river channel are developed. The Preissmann implicit scheme and the Lax-Wendroff two-step explicit scheme with the Method of Characteristics for water motion and a forward time centered space explicit scheme for sediment motion are developed to simulate the sediment transport rate and the variation of channel bed level. The program correctness of each model is successfully verified using volume conservation tests. The sensitivity studies show that higher peak stage level, steeper channel slope and longer flooding duration produce more channel bed erosion. and median grain size, $D_{50}=0.4mm$ give maximum volume loss in this study. Finally, the numerical models are found to produce reasonable results from the various sensitivity tests which reveal that the numerical models have properly responded to the changes of each model parameter.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.419-426
• /
• 2016

Measurements of bottom loss as a function of grazing angle (in range of $9{\sim}14^{\circ}$) at a frequency range of 4 ~ 8 kHz were conducted on an experimental site off Geoje island in October 2015. Geoacoustic inversion of the surficial sediment thickness is performed using the arrival time difference between the surficial layer and the sub-bottom layer reflected signal. To invert the thickness of surficial sediment, we used the grain size of $8{\sim}10{\phi}$ obtained by KIGAM (Korea Institute of Geoscience and Mineral Resources). The thickness of the surficial sediment was estimated to be 4 ~ 7 m. Finally, this inversion result was compared with the geoacoustic observation conducted by the KIOST (Korea Institute of Ocean Science & Technology) using sub-bottom profiler.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.2
• /
• pp.107-116
• /
• 1999

To study the characters of surface sediment and to describe the seasonal depositional environment as a result of sedimentation process off Byun-San Peninsula, a total 61 samples of surface sediment (32 samples in summer; 29 samples in winter) were collected and analysed. A digitized depth data from sea chart and echosounding profiles along five trans-sections were helpful for understanding the morphological factors. The types classified by the characters of surface sediment are type I (sand, S), type II (silty sand, zS), and type ill (sandy silt, sZ). Mean grain size varies from 2.11 to 7.81 ${\Phi}$. The positive-skewness shows the typical tide-dominated environment. The sediment type of the northwestern stations is medium sand and the sorting value is 0.5~1.4 ${\Phi}$ of well/moderately sorted. Meanwhile, other stations are composed of muddy sands and sandy muds transported from rivers and offshore. These sediment types toward inshore change gradually from silty sand to sandy silt. According to the C/M diagram, there are three major transport modes of sediment: bed load (Mode A), graded suspension (Mode B), and suspension (Mode C), correlating with north-eastern sandy area, middle part of silty-sand area, and southern sandy-silt area, respectively. The result of Principal Component Analysis shows also similar pattern of sediment types. In result, sediment texture of type III tends to be finer and more poorly-sorted than that of type II and sediment facies are correlateed with sedimentation process.

• Journal of Environmental Impact Assessment
• /
• v.16 no.6
• /
• pp.393-405
• /
• 2007

To examine the sedimentary geochemical characteristics of sediment in the Tamjin River and Doam bay, the analysis was conducted, using the sample obtained in February 2000, on the grain size and the contents of metallic elements and organic carbon. The factors that influence the geochemical behavior of metallic elements in the surface sediment are grain size, organism, surrounding soil and $CaCO_3$. To find out the pollution level of metallic elements, the enrichment factor (EF) and the index of geoaccumulation ($I_{geo}$) were researched. The majority of metallic elements sustain their values in natural state. The elements such as K, Ba, Zr, etc. appear to be rich in some places. The EF and $I_{geo}$ of P, Cu, Zn, and Pb, which belong to toxic heavy metals, are partly related with man-made pollution. P and Cu have a high EF, Pb has a high $I_{geo}$ and Zn is high in both EF and $I_{geo}$. The low contents of P and Cu are not likely to be related with the pollution of water environment. However, given the development of relative pollution, the research and the management regarding the pollutants are needed. Because Pb, naturally enriched by geological characteristics, has a large influence on water environment along with Zn, the adequate measures against man-made pollution should be worked out.

• The Korean Journal of Quaternary Research
• /
• v.5 no.1
• /
• pp.15-31
• /
• 1991

A total of 90 surface sediment samples, collected from the continental margin area bordering east and southeast coast of Korea, were subject to the geochemical analyses with the aim of filling the gap in our knowledge of this environment. The analyzed items included the major elements (Al, Fe, Mg, Ca, K, Na, p and Mn), organic carbon, and some trace metals (Ba, Co, Cu, Sr and Zn). The sediment grain-size exerted a predominant influence on the contents of most elements, with the exceptions of Ca, K, Sr and Ba. The Ca and Sr contents, being closely interrelated each other, were mainly controlled by the calcium carbonate content. The K content, on the other hand, appeared to be influenced by both illite and feldspar. The Ba content showed a certain relationship with that of K, suggesting a common source of these two elements; potassium feldspar. The R-mode factor analysis result also reaffirmed the above-mentioned controlling factors on the sediment geochemistry. The grain-size dependency of trace metals obscures their areal distribution pattern from the total contents. However, with the metal/aluminum ratios we could differentiate the subtle difference in the metal enrichment. Hence, sediments of the southern coastal area appear to receive some anthropogenic inputs of metals, though the effect is still negligible.

• Journal of the Korean earth science society
• /
• v.24 no.4
• /
• pp.346-360
• /
• 2003

In order to investigate the geochemical characteristics of surface sediments in streams of Gwangju City, sediment samples from the main stream of Yeongsan river, Hwangryong river, and Gwangjucheon in the city were collected and analyzed for grain size and metal and organic carbon contents. The sediment types of the streams widely vary from pebble to mud. The metal contents in the sediments from Yeongsan river and Hwangryong river are mainly dependent on the grain size of the sediments and the geology around the streams, while the sediments in Gwangiucheon are controlled by organic matter contents from the domestic sewage. The enrichment factor (Ef) and index of geoaccumulation (Igeo) representing the degree of metal contamination in the sediments are relatively low in the mainstream of Yeongsan river and Hwangryong river. However, those of Gwangjucheon show EF values of P=8.30, Cu=5.54, Zn=14.28 and Pb=7.41 and Igeo values of P=3.78, Cu=2.79, Zn=3.66 and Pb=1.59. The heavy metal contamination is especially significant near the area where the Seobangcheon and Donggyecheon branches of Gwanjucheon, join. Therefore, it is suggested that the metallic contaminations of these small streams are significantly influenced by the domestic sewage of the city.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.22 no.1
• /
• pp.18-30
• /
• 2017

The East Sea is almost entirely composed of sandy facies, and the facies type is the major factor influencing benthic polychaete communities. There have been few studies of the effects of environmental factors on benthic polychaetes in thermal discharge areas consisting of different sediment types. This study identified the spatial distribution patterns based on the species composition and distribution of benthic polychaete communities, and the environmental factors influencing benthic polychaetes near power plants were investigated. The polychaete communities in the Uljin, Hupo, and Gori coastal areas near the power plants in the East Sea were seasonally investigated from August 2006 to February 2013. As a result, 283 species were collected. The dominant species were Spiophanes bombyx, Magelona japonica, Lumbrineris longifolia, and Sternaspis scutata. Spiophanes bombyx was the dominant species at Uljin and Hupo, but M. japonica was the dominant species at Gori. Two dominant species from the coastal waters of the East Sea, Lumbrineris longifolia and M. japonica, were rare in the power plant water intake or drainage areas. Cluster analysis was performed to divide the study area into groups by the total organic carbon content, sediment grain size and facies patterns. This study suggests that the community structures of polychaetes are more affected by the total organic carbon, grain size of sediment and facies than by disturbance from thermal discharge, which only affected the polychaete community near power plant drainage areas.