• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.135-147
• /
• 2000

Section design of vehicle structure has been developed by two methods. One is the section property method which uses section property as a design variable. This method shows the tendency of an optimum section approximately. The other method is the section shape method which utilizes geometric parameter of section as a design variable. Practical solutions are obtained by this method. However, it is very expensive for large-scale problems due to the large number of geometric parameters. These two methods are compared through several sample problems. The finite element method is used for the structural and sensitivity analyses. The results are analyzed based on the number of function evaluations, the quality of cost function, the complexity of programing, and etc. The applications of both methods are also discussed.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.497-506
• /
• 1997

In this paper described is the software developed to calculate the physical properties of arbitrary section shape. The software consists of arbitrary section display module(ASDM) and section property calculation module(SPCM). ASDM defines and displays the shape of arbitrary section and SPCM calculates its properties such as area, centroid, moment of inertia, torsional constant, etc.. In many cases, calculation of section properties is not easy because user has to define the vertex coordinates which are difficult to do so in the case of arbitrary section. In the developed software, however, since user is asked to define only points of central lines and thickness of arbitrary section, the calculattion task of arbitrary section is very effective.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1661-1666
• /
• 2003

The purpose of this study is to develop the simplified model of the crankshaft in the large marine engine for dynamic analysis. Because the actual engine system is under complex dynamic loading condition and it has multi-cylinder, the dynamic analysis is purchased at a high computation cost. In spite of this burden, the dynamic analysis must be perfonned to assure structural integrity of operating marine engine. Therefore, simplification of the analytic model is necessary for dynamic analysis. Beam-mass model, which is generated with the section property method, is the model simplified effectively. Section property method can provide desired section information by optimization technique. By applying beam-mass model to the crankshaft in the large marine engine, the usefulness of the proposed method was proven.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.202-209
• /
• 2007

Vehicle body frame stiffness affects the dynamic and static characteristics. Vehicle frame structural performance is greatly affected by crossmember and joint design. While the structural characteristics of these joints vary widely, there is no known tool currently in use that quickly predicts joint stiffness early in design cycle. This paper presents the joint design factors affecting on low frequency vibration. The joint factors are joint panel thickness, section property, flange width and weld point space. To study the effect on vehicle low frequency vibration, case studies for these factors are performed. And Sensitivity analysis for section property is performed. The result can present design guide for high-stiffness vehicle.

• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.262-269
• /
• 2003

An approach to compute characteristic curves such as section curves, reflection characteristic lines, and asymptotic curves on a surface is introduced. Each problem is formulated as a surface-plane inter-section problem. A single-valued function that represents the characteristics of a problem constructs a property surface on parametric space. Using a contouring algorithm, the property surface is intersected with a horizontal plane. The solution of the intersection yields a series of points which are mapped into object space to become characteristic curves. The approach proposed in this paper eliminates the use of traditional searching methods or non-linear differential equation solvers. Since the contouring algorithm has been known to be very robust and rapid, most of the problems are solved efficiently in realtime for the purpose of visualization. This approach can be extended to any geometric problem, if used with an appropriate formulation.

• 대한수학회보
• /
• 제30권2호
• /
• pp.251-263
• /
• 1993

The purpose of this paper is to study the solvability of the equation (E). In Section 2, we give preliminary definitions. In Section 3, we prove related two results (Theorem 1 and Corollary 1) concerning the closedness property of accretive operators in the class of spaces whose nonempty bounded closed convex subsets have the fixed point property for nonexpansive self-mapping. Using therem 1, we derive a result (Theorem 2) on the range of accetive operators in (.pi.)$_{1}$ spaces with a view to establishing a new result, which improves a result of Kartsatos [8] and Webb [15]. Further, we give an interesting consequence (Corollary 3) of Theorem 2. In section 4, we apply Corollary 1 to obtain two results (Theorem 3 and 4) for the range of sums of two accretive operators, which generalize two results of Reich [12].

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.135-142
• /
• 2004

The apparent advantages of FRP (fiber reinforced plastics) composites over the conventional structural materials may be attributed to their high specific strength and stiffness. Other affordable properties of FRPs including an excellent durability make them particularly attractive for the structures in severe service conditions. Therefore, the material and sectional properties of a FRP structural component should be designed to meet its specific requirements and service conditions. This paper is performed the material property optimization under optimum design of pultruded FRP bridge deck section. In the problem formulation, an objective function is selected to minimize the maximum R(strength ratio). The thickness of layers, volumes of fibers and matrix fiber orientation, and stacking sequence of FRPs are used as the design variables. Strength ratio in the design code, material failure criteria and pultruded manufacture thickness are selected as the design constraints to enhance the material performance of FRP decks. From the results of the numerical investigation, we obtained the optimum deck section profile for conventional using object.

• ETRI Journal
• /
• 제20권1호
• /
• pp.74-95
• /
• 1998

Both telecommunications standardization activities and an intellectual property rights (IPRs) system are regarded as effective mechanisms for improving social benefits. Because of inherent conflicts that exist between the two, however, serious problems are generated in the international arena where the competition for technology development and markets is becoming increasingly fierce. In this paper, ways of harmonizing the relationship between the two are explored and explained. For this purpose, telecommunications standardization and IPRs protection mechanisms are described, and their positive and negative effects as well as their inter-relationship are also analyzed. In addition, IPR case studies related to international standardization are explained and analyzed. The Current status and problems of IPRs policy of major international standardization organizations are analyzed as well. Finally, based on the results of the analyses, viable policy recommendations and research strategies for more comprehensive study of the above problems are proposed.

• Journal of applied mathematics & informatics
• /
• 제12권1_2호
• /
• pp.385-393
• /
• 2003

Let Y(t) be a stochastic integral process represented by Brownian motion. We show that YHt (t) is continuous in t with probability one for Molder function Ht of exponent ${\beta}$ and finally we derive asymptotic self-similar process YM (t) which converges to Yw (t).

• Architectural research
• /
• 제10권2호
• /
• pp.37-42
• /
• 2008

This study is to get the proper evaluation of the residual property of reinforced concrete beam exposed to fire. This study focused on the strength resistance and analytical evaluation of RC members exposed high temperature. And this study is the basis analytical research to conduct the other studies. To analysis by the finite element method, the Total-RC program was used to analysis it and the Total-Temp program was also used to analysis the temperature distributions at the section. All of results were compared with the pre-existing experimental data of simple supported beam. Using it, the parameters influencing the structural capacity of the high temperature-damaged RC members and residual strength estimation are investigated. The temperature distribution and the structural capacity at the section are calculated in this step. An application of this method is compared with the heating test result and residual property test for simple supported beam which is subjected to ISO 834 test fire. The results of this study are as follows; 1) The loads-displacement relationship of RC beam, considering initial thermal stress of cross section and heat transfer analysis are estimated comparing analytical value with pre-existing experimental results. 2) by the heating time (0, 1, 2 hours), the results of analysis with parameters show that the load capacity exposing at fire is affected.