• 한국보건간호학회지
• /
• 제19권2호
• /
• pp.229-240
• /
• 2005

Purpose: To evaluate every step of the cancer screening program. Method: 146 of 233 health centers participated in this study. Data were collected by mailing questionnaires between December 2002 and January 2003. The response rate was 65.5%. Result: The government cancer screening program was directed by a variety of departments of the health centers. 41.1% of persons in charges were nurses. 41.3% of the health centers received a list of the appropriate person from the National Health Insurance Cooperation within one or two months. 26.1% of health centers received ??? after five month from when the program started. All the health centers advertised their services, and most of them used mail and mass media 56.4%, used other institute's materials, and 72.2% of them used the government's materials. 76.7% of the heath centers recommended secondary health screening to the persons who had positive results at the first screening. 71.6% of the health centers ascertained the patients with cancer who were diagnosed at secondary screenings. 67.9% of the health centers had registered home-based cancer patients at the health center. 137 out of 146 health centers had a local institute for cancer screening; an average of 4.9 institutes had cancer screening. 80.1% of the persons in charge of the programs felt they needed this program, but 80.8% of them thought the program should be modified. Conclusion: Organized and standardized programs are needed to promote the efficiency of National Cancer Screening Program.

• 한국수소및신에너지학회논문집
• /
• 제20권6호
• /
• pp.505-511
• /
• 2009

The hydriding and electrochemical characteristics of Zr-based $AB_2$ alloy produced by gas atomization have been extensively examined. For the particle morphology of the as-cast and gas-atomized powders, it can be seen that the mechanically crushed powders are irregular, while the atomized powder particles are spherical. The increase of jet pressure of gas atomization process results in the decrease of hydrogen storage capacity and the slope of plateau pressure significantly increases. TEM and EDS studies showed the increase of jet pressure in the atomization process accelerated the phase separation within grain of the gas-atomized alloy, which brought about a poor hydrogenation property. However, the gas-atomized $AB_2$ alloy powders produced by jet pressure of 50 bar kept up the reversible $H_2$ storage capacity and discharge capacity similar to the mechanically crushed particles. In addition, the electrode of gas-atomized Zr-based $AB_2$ alloy of 50 bar showed improved cyclic stability over that of the cast and crushed particulate, which is attributed to the restriction of crack propagation by grain boundary and dislocation with ch/discharging cycling.

• 한국과학교육학회지
• /
• 제4권2호
• /
• pp.57-63
• /
• 1984

An inquiry approach in teaching science has been advocated by many science educators for the past few decades, and most elementary and secondary science curricula have incorporated it in varying degrees. It has been proven in recent studies, however, that there exists considerable discrepancy between the expectation of outcomes of the inquiry approach and the actuality. This in part implies that there is a somewhat urgent need for the systematic evaluation of the approach in teaching science. The purpose of this study is to develop a comprehensive instrument for evaluating inquiry teaching approaches embedded in science curricular materials. To develop a more valid and reliable instrument a set of empirical data was used in the developmental procedure, and most of the previous studies regarding inquiry teaching method and inquiry evaluation were consulted. The inquiry evaluation method developed in this study, called the Scientific Inquiry Evaluation Inventory (SIEI), is composed of three parts: (1) analyzing and coding each science process task of inquiry activity; (2) evaluating each inquiry activity as a whole; and (3) evaluating each science laboratory curriculum as a whole. The first part of the instrument consists of twenty science process categories and thirty subcategories grouped into four sections: (1) gathering and organizing data; (2) interpreting and analyzing data; (3) synthesizing results and evaluation; and (4) hypothesizing and designing an experiment. The science process categories are arranged according to the level of difficulty, psychological level of thinking, degree of creativity demand, and the model of the process of scientific inquiry, which is also developed in the study. The second part of the instrument contains four evaluation scales of inquiry activity: (1) competition/cooperation scale; (2) discussion scale; (3) openness scale; and (4) inquiry scope scale. And the last part consists of three methods for evaluating a science laboratory curriculum as a whole: (1) inquiry pyramid; (2) inquiry index; and (3) difficulty index. The instrument is designed to be used by teachers, science curriculum developers and science education evaluators for the purpose of diagnosing the nature and appropriateness of scientific inquiry introduced in secondary science curricular materials, especailly in laboratory work and field work.

• Geomechanics and Engineering
• /
• 제14권2호
• /
• pp.195-202
• /
• 2018

Many laboratory experiments on crack propagation under uniaxial loading and biaxial loading have been conducted in the past using transparent materials such as resin, polymethyl methacrylate (PMMA), etc. However, propagation behaviors of three-dimensional (3D) cracks in rock or rock-like materials under tri-axial loading are often considerably different. In this study, a series of true tri-axial loading tests on the rock-like material with two semi-ellipse pre-existing cracks were performed in laboratory to investigate the acoustic emission (AE) characteristics and propagation characteristics of 3D crack groups influenced by intermediate principal stress. Compared with previous experiments under uniaxial loading and biaxial loading, the tests under true tri-axial loading showed that shear cracks, anti-wing cracks and secondary cracks were the main failure mechanisms, and the initiation and propagation of tensile cracks were limited. Shear cracks propagated in the direction parallel to pre-existing crack plane. With the increase of intermediate principal stress, the critical stress of crack initiation increased gradually, and secondary shear cracks may no longer coalesce in the rock bridge. Crack aperture decreased with the increase of intermediate principal stress, and the failure is dominated by shear fracturing. There are two stages of fracture development: stable propagation stage and unstable failure stage. The AE events occurred in a zone parallel to pre-existing crack plane, and the AE zone increased gradually with the increase of intermediate principal stress, eventually forming obvious shear rupture planes. This shows that shear cracks initiated and propagated in the pre-existing crack direction, forming a shear rupture plane inside the specimens. The paths of fracturing inside the specimens were observed using the Computerized Tomography (CT) scanning and reconstruction.

• 한국입자에어로졸학회지
• /
• 제15권1호
• /
• pp.1-13
• /
• 2019

Current desulfurization and denitrification technologies have reached a considerable level in terms of reduction efficiency. However, when compared with the simultaneous reduction technology, the individual reduction technologies have issues such as economic disadvantages due to the difficulty to scale-up apparatus, secondary pollution from wastewater/waste during the treatment process, requirement of large facilities for post-treatment, and increased installation costs. Therefore, it is necessary to enable practical application of simultaneous SOx and NOx treatment technologies to remove two or more contaminants in one process. The present study analyzes a technology capable of maintaining simultaneous treatment of SOx and NOx even at low temperatures due to the electrochemically generated strong oxidation of the wet-pulse complex system. This system also reduces unreacted residual gas and secondary products through the wet scrubbing process. It addresses common problems of the existing fuel gas treatment methods such as SDR, SCR, and activated carbon adsorption (i.e., low treatment efficiency, expensive maintenance cost, large installation area, and energy loss). Experiments were performed with varying variables such as pulse voltage, reaction temperature, chemicals and additives ratios, liquid/gas ratio, structure of the aeration cleaning nozzle, and gas inlet concentration. The performance of individual and complex processes using the wet-pulse discharge reaction were analyzed and compared.

• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.1-8
• /
• 2019

The $Cu(In,Ga)Se_2$ (CIGS) thin film obtained by two-step process (metal deposition and Se annealing) has a rough surface morphology and many voids at the CIGS/Mo interface. To solve the problem a precursor that contains Se was employer by depositing a (In,Se)/(Cu,Ga) stacked layer. We devised a two-step annealing (vacuum pre-annealing and Se annealing) for the precursor because direct annealing of the precursor in Se environment resulted in the small grains with unwanted demarcation between stacked layers. After vacuum pre-annealing up to $500^{\circ}C$ the CIGS film consisted of CIGS phase and secondary phases including $In_4Se_3$, InSe, and $Cu_9(In,Ga)_4$. The secondary phases were completely converted to CIGS phase by a subsequent Se annealing. A void-free CIGS/Mo interface was obtained by the two-step annealing process. Especially, the CIGS film prepared by vacuum annealing $450^{\circ}C$ and subsequent Se annealing $550^{\circ}C$ showed a densely-packed grains with smooth surface, well-aligned bamboo grains on the top of the film, little voids in the film, and also little voids at the CIGS/Mo interface. The smooth surface enhanced the cell performance due to the increase of shunt resistance.

• 대한금속재료학회지
• /
• 제50권9호
• /
• pp.645-651
• /
• 2012

This study investigated changes in phase fraction caused by the addition of Mo, as well as the subsequent behaviour of N and its effect on the mechanical properties of welded 24Cr-N duplex stainless steel weld metals. Filler metal was produced by fixing the contents of Cr, Ni, N, and Mn while adjusting the Mo content to 1.4, 2.5, 3.5 wt%. The delta ferrite fraction increased as the Mo content increased. In contrast, the ${\gamma}$ fraction decreased and changed from a round to an acicular shape. Secondary austenite (${\gamma}^{\prime}$) was observed in all specimens in a refined form, but it decreased as the Mo content increased to the extent that it was nearly impossible to find any secondary austenite at 3.5 wt% Mo. Both tensile and yield strengths increased with the addition of Mo. In contrast, the highest value of ductility was observed at 1.41 wt% Mo. At all temperatures, impact energy absorption showed the lowest value at 3.5 wt% Mo, at which the amount of ${\delta}$-ferrite was greatest. There was no significant temperature dependence of the impact energy absorption values for any of the specimens. As the fraction of ${\gamma}$ phase decreased, the amount of N stacked in the ${\gamma}$ phase increased. Consequently, the stacking fault energy decreased, while the hardness of ${\gamma}$ increased.

• 한국결정성장학회지
• /
• 제31권1호
• /
• pp.16-23
• /
• 2021

리튬이차전지 제조 공정 중 발생한 폐액으로부터 회수된 탄산리튬의 경우, 이차전지 양극재의 원료인 코발트, 니켈 및 망간의 중금속이 함유되어 있다. 본 연구에서는 탄산리튬의 재결정화를 통하여 순도 98.28 %의 저급 탄산리튬 분말에 함유된 중금속을 제거하고 탄산리튬의 순도를 높이고자 하였다. 먼저 염산 수용액을 이용하여 탄산리튬의 침출 효율을 살펴보았으며, pH 5 조건으로 침출 후 탄산나트륨의 당량 및 농도의 탄산리튬 재결정에 대한 영향을 확인하였다. 리튬의 함량 기준 대비 탄산나트륨 1 당량에서 1.5로 증가할수록, 농도 1.4 M에서 2.8 M로 증가할수록 회수율은 향상되었으며, 탄산나트륨의 투입 조건이 달라짐에 따라 결정 형상이 달라지는 것을 SEM 분석을 통해 확인할 수 있었다. 재결정된 탄산리튬 분말은 수세하여 순도 99.9 % 이상의 고순도 탄산리튬을 회수할 수 있었다.

• 한국재료학회지
• /
• 제34권1호
• /
• pp.27-33
• /
• 2024

Al₂O₃ has excellent sintering properties and is important in semiconductor manufacturing processes that require high-temperature resistance and chemical inertness in a plasma environment. In this study, a comprehensive analysis of the chemical characteristics, physical properties, crystal structure, and dispersion stability of three commercially available Al₂O₃ powders was conducted. The aim was to provide a technological foundation for selecting and utilizing appropriate Al₂O₃ powders in practical applications. All powders exhibited α-Al₂O₃ as the main phase, with the presence of beta-phase Na₂O-11Al₂O₃ as the secondary phase. The highest Na⁺ ion leaching was observed in the aqueous slurry state due to the presence of the secondary phase. Although the average particle size difference among the three powders was not significant, distinct differences in particle size distribution were observed. ALG-1SH showed a broad particle size distribution, P162 exhibited a bimodal distribution, and AES-11 displayed a uniform unimodal distribution. High-concentration Al₂O₃ slurries showed differences in viscosity due to ion release when no dispersant was added, affecting the electrical double-layer thickness. Polycarboxylate was found to effectively enhance the dispersion stability of all three powders. In the dispersion stability analysis, ALG-1SH exhibited the slowest sedimentation tendency, as evidenced by the low TSI value, while P162 showed faster precipitation, influenced by the particle size distribution.

• Journal of Information Technology Applications and Management
• /
• 제30권1호
• /
• pp.1-9
• /
• 2023

Interest in the future of the battery market is growing as Tesla announces plans to increase production of electric vehicles and to produce batteries. Tesla announced an action plan to reduce battery prices by 56% through 'Battery Day', which included expansion of factories to internalize batteries and improvement of materials and production technology. In the trend of automobile electrification, the expansion of the battery market, which accounts for 40% of the cost of electric vehicles, is inevitable, and the size of the electric vehicle battery market in 2026 is expected to increase more than five times compared to 2016. With the development of materials and process technology, the energy density of electric vehicle batteries is increasing while the price is decreasing. Soon, electric vehicles and internal combustion locomotives are expected to compete on the same line. Recently, the mileage of electric vehicles is approaching that of an internal combustion locomotive due to the installation of high-capacity batteries. In the EV battery market, Korean, Chinese and Japanese companies are fiercely competing. Based on market share in the first half of 2020, LG Chem, CATL, and Panasonic are leading the EV battery supply, and the top 10 companies included 3 Korean companies, 5 Chinese companies, and 2 Japanese companies. All-solid, lithium-sulfur, sodium-ion, and lithium air batteries are being discussed as the next-generation batteries after lithium-ion, among which all-solid-state batteries are the most active. All-solid-state batteries can dramatically improve stability and charging speed by using a solid electrolyte, and are excellent in terms of technology readiness level (TRL) among various technology alternatives. In order to increase the competitiveness of the battery industry in the future, efforts to increase the productivity and economy of electric vehicle batteries are also required along with the development of next-generation battery technology.