• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.339-345
• /
• 2004

In this study we reported the Smoke Density values of interior materials of railroad passenger car and investigated the specific smoke density(Ds) by NBS smoke chamber to the variance of some test conditions. First we compared the result of Ds from ISO 5659-2 with that from ASTM E 662 for same material. Secondary studied the Ds value to the variance of specimen shape and thickness and to the variance of other conditions.

• Animal cells and systems
• /
• v.2 no.4
• /
• pp.411-414
• /
• 1998

One novel species, Phaeacius yunnanensis n. sp. and three species new to China, Brettus albolimbattus, Hyllus lacertosus and Ptocasius kinhi of the jumping spider.belonging to the family Salticidae, are described based on the materials collected from Yunnan Province, China. The new species is similar to Phaecius lancerarius, but can be distinguished by secondary conductor covers on the emblus. That of the latter below the emblous, retro1aterial tibial apophysis, is much more slender and with an abdominal pattern.

• Journal of Korean Library and Information Science Society
• /
• v.1
• /
• pp.53-67
• /
• 1974

This study aims at diagnozing the existing school library laws and their enforcement regulations together with the library organization, and finding out any problems in them for the lack of legal and administrative suppxt has been considered the main hindrances to the developrnent of school library. The results of the work are as follows: 1. Full use of materials on the part of students is impossible because there is description in the school facilitier enforcement regulations except that of reading room. 2. No administrative consederation on the school library. 3. No incentive to be an able librarians because there is no devision in the lebrary teacher eligibility between the elementary and secondary level.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2008.05a
• /
• pp.118-122
• /
• 2008

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.144-148
• /
• 1997

We synthesized polyaniline films electrochemically under constant current conditions, which exhibited electric conductivity as high as 100 S/cm. By charge and discharge cycling of polyaniline films, we obtained specific discharge capacity as high as 195 mAH/g using HSO$_4$- doped polyaniline. For the polyaniline synthesized using H$_2$SO$_4$ and HClO$_4$ composite electrolyte. we also obtained specific discharge capacity as high as 134 mAHg which rivals inorganic electro- active materials.

• Korean Journal of Materials Research
• /
• v.24 no.10
• /
• pp.538-542
• /
• 2014

Microstructural and mechanical characteristics of Al-6Si-2Cu alloy for lightweight automotive parts were investigated. The test specimens were prepared by gravity casting process. Solution heat treatments were applied to as-cast alloys to improve mechanical properties. The microstructure of the gravity casting specimen presents a typical dendrite structure, having a secondary dendrite arm spacing (SDAS) of $37{\mu}m$. In addition to the Al matrix, a large amount of coarsened eutectic Si, $Al_2Cu$ intermetallic phase, and Fe-rich phases were identified. After solution heat treatment, single-step solution heat treatments were found to considerably improve the spheroidization of the eutectic Si phase. Two-step solution treatments gave rise to a much improved spheroidization. The mechanical properties of the two-step solution heat treated alloy have been shown to lead to higher values of properties such as tensile strength and microhardness. Consequentially, the microstructural and mechanical characteristics of Al alloy have been successfully characterized and are available for use with other basic data for the development of lightweight automotive parts.

• Korean Journal of Materials Research
• /
• v.19 no.2
• /
• pp.85-89
• /
• 2009

Nano-crystalline hydroxyapatite (HAp) films were formed at the Ti surface by a single-step microarc oxidation (MAO), and HAp-zirconia composite (HZC) films were obtained by subsequent chemical vapor deposition (CVD) of zirconia onto the HAp. Through the CVD process, zero- and one-dimensional zirconia nanostructures having tetragonal crystallinity (t-ZrO2) were uniformly distributed and well incorporated into the HAp crystal matrix to form nanoscale composites. In particular, (t-$ZrO_2$) was synthesized at a very low temperature. The HZC films did not show secondary phases such as tricalcium phosphate (TCP) and tetracalcium phosphate (TTCP) at relatively high temperatures. The most likely mechanism for the formation of the t-$ZrO_2$ and the pure HAp at the low processing temperature was proposed to be the diffusion of $Ca^{2+}$ ions. The HZC films showed increasing micro-Vickers hardness values with increases in the t-$ZrO_2$ content. The morphological features and phase compositions of the HZC films showed strong dependence on the time and temperature of the CVD process. Furthermore, they showed enhanced cell proliferation compared to the $TiO_2$ and HAp films most likely due to the surface structure change.

• Korean Journal of Materials Research
• /
• v.6 no.5
• /
• pp.483-488
• /
• 1996

InP 기판위에 InP와 격자정합된 undoped-InGaAs에서 zine의 확산 특성을 Electrochemical Capacitance-Voltage 법(polaron)과 Secondary Ion Mass Spectrometry(SIMS)로 조사하였다. Metallorganic Chemical Vapor Deposition (MOCVD)를 이용하여 undoped-InGaAs 층을 성장시켰으며 확산방법으로는 Zn3P2 확산원 박막과 Rapid Thermal Annealing (RTA)를 이용하였다. 450-55$0^{\circ}C$온도범위에서 30-300초 동안 확산을 수행한 결과 zinc의 확산계수는 D=Doexp(-$\Delta$E/kT)의 특성을 만족하였으며, Do와 $\Delta$E는 각각 1.3x105$\textrm{cm}^2$/sec와 2.3eV였다. 얻어진 확산계수는 다른 확산방법을 이용한 값들에 비해 매우 큰 값인데, 이것은 RTA 처리시 빠른 온도 증가에 의한 확산원 박막, 보호막, 그리고 InGaAs 에피층이 가지는 열팽창계수의 차이로인한 응력의 효과에 의한 것으로 생각되며, 이를 sealed-ampoule 법을 사용한 경우의 확산특성과 비교를 통하여 확인할 수 있었다.

• Korean Journal of Materials Research
• /
• v.28 no.6
• /
• pp.337-342
• /
• 2018

Using a high pressure homonizer, we report on the electrochemical performance of $Li_4Ti_5O_{12}(LTO)$ particles manufactured as anode active material for lithium ion battery. High-pressure synthesis processing is performed under conditions in which the mole fraction of Li/Ti is 0.9, the synthesis pressure is 2,000 bar and the numbers of passings-through are 5, 7 and 10. The observed X-ray diffraction patterns show that pure LTO is manufactured when the number of passings-through is 10. It is found from scanning electron microscopy analysis that the average size of synthesized particles decreases as the number of passings-through increases. $LiCoO_2-based$ active cathode materials are used to fabricate several coin half/full cells and their battery characteristics such as lifetime, rate capability and charge transfer resistance are then estimated, revealing quite good electrochemical performance of the LTO particles as an effective anode active material for lithium secondary batteries.

• Composites Research
• /
• v.15 no.3
• /
• pp.18-29
• /
• 2002

The bending vibration and thermal flutter instability of spacecraft booms modeled as circular thin-walled beams of closed cross-section and subjected to thermal radiation loading is investigated in this paper. The thin-walled beam model incorporates a number of nonclassical effects of transverse shear, primary and secondary warping, rotary inertia and anisotropy of constituent materials. Thermally induced vibration response characteristics of a composite thin walled beam exhibiting the circumferantially uniform system(CUS) configuration are exploited in connection with the structural flapwise bending-lagwise bending coupling resulting from directional properties of fiber reinforced composite materials and from ply stacking sequence. The numerical simulations display deflection time-history as a function of the ply-angle of fibers of the composite materials, damping factor, incident angle of solar heat flux, as well as the boundary of the thermal flutter instability domain. The adaptive control are provided by a system of piezoelectric devices whose sensing and actuating functions are combined and that are bonded or embedded into the host structure.