• 한국재료학회지
• /
• 제1권4호
• /
• pp.214-220
• /
• 1991

실리콘 산화막을 $CHF_{3/}C_2F_6$ 혼합가스를 사용하여 반응성이온 건식식각을 행할 때 실리콘 표면에 형성되는 잔류막과 손상층을 X-선 광전자 분광기(XPS)와 이차이온 질량 분석기(SIMS)를 사용, 연구하였다. 실리콘, 탄소, 산소 및 불소의 angle-resolved XPS분석기술을 이용한 비파괴적 화학결합상태의 깊이분포 분석을 통하여 잔류막의 표면부에 O-F 결합이 존재하며 잔류막은 주로 탄소와 불소의 결합체인 C-F 플리머로 구성되어져 있고 Si-O, Si-C 및 Si-F 결합 등이 존재함을 알았다. 손상층은 실리콘 표면에서 약 60nm 깊이까지 탄소와 불소의 침투에 의해 형성되어져 있음을 알았다.

• 대한전자공학회논문지SD
• /
• 제37권10호
• /
• pp.1-10
• /
• 2000

소자의 크기가 딥 서브 마이크론 이하로 작아짐에 따라 극 저 에너지 이온 주입의 정확한 모델링은 중요함을 더하게 되었다. 본 논문에서는 이체 충돌 근사(Binary Collision Approximation)에 기반을 둔 3차원 몬테카를로 이온 주입 시뮬레이터를 개발하였다. 이를 위하여, 저 에너지 이온 주입에 있어 이체 충동 근사 방법의 제한 요소인 전자 에너지 정지력에 대한 모델을 개선하였고, 다중 충돌 계산을 위한 모델을 적용하였다. 계산된 이온 주입 도펀트 분포 및 결함 분포는 실제 실험치와 일치함을 확인하였다. 또한, 3차원 이온 주입 시뮬레이션에 있어 계산 시간의 효율을 극대화 하고자, 본 연구에서는 이온 분포 복사법(Ion Distribution Replica Method)을 개발하였고, 복잡한 토폴로지를 갖는 다층 에이어의 이온 주입 공정에 있어 빠른 수행 시간 및 결과의 정확성을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.304.1-304.1
• /
• 2016

We have investigated the effect of plasma nitridation of atomic layer deposited-Al2O3 films of monocrystalline Si wafers and the thermal properties of nitridated Al2O3 films. Nitridation was performed on Al2O3 to form aluminum oxynitride (AlON) using NH3 plasma treatment in a plasma-enhanced chemical vapor deposition and it was conducted at temperature of $400^{\circ}C$ with various plasma power condition. After nitridation, we performed firing and forming gas annealing (FGA). For each step, we have observed the minority carrier lifetime and the implied Voc by using quasi-Steady-State photoconductance (QSSPC). We confirmed a tendency to increase the minority carrier lifetime and the implied Voc after the nitridation. On the other hand, the minority carrier lifetime and the implied Voc was decreased after Firing and forming gas annealing (FGA). To get more information, we studied properties of the plasma treated Al2O3 films by using Secondary Ion Mass Spectroscopy (SIMS) and X-ray Photoelectron Spectroscopy (XPS).

• 한국재료학회지
• /
• 제28권4호
• /
• pp.247-253
• /
• 2018

We examined the characteristics of indium tin zinc oxide (ITZO) thin film transistors (TFTs) on polyimide (PI) substrates for next-generation flexible display application. In this study, the ITZO TFT was fabricated and analyzed with a SiOx/SiNx gate insulator deposited using plasma enhanced chemical vapor deposition (PECVD) below $350^{\circ}C$. X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectroscopy (SIMS) results revealed that the oxygen vacancies and impurities such as H, OH and $H_2O$ increased at ITZO/gate insulator interface. Our study suggests that the hydrogen related impurities existing in the PI and gate insulator were diffused into the channel during the fabrication process. We demonstrate that these impurities and oxygen vacancies in the ITZO channel/gate insulator may cause degradation of the electrical characteristics and bias stability. Therefore, in order to realize high performance oxide TFTs for flexible displays, it is necessary to develop a buffer layer (e.g., $Al_2O_3$) that can sufficiently prevent the diffusion of impurities into the channel.

• 한국입자에어로졸학회지
• /
• 제4권2호
• /
• pp.51-67
• /
• 2008

In this study, we devoted to kinetic measurement of the catalytic oxidation of iron-containing flame soot particles and better understanding the role of catalytic particles on carbon oxidation in particular at low temperature, targeting on autothermal regeneration of diesel particulate filter by diesel exhaust gas. Carbon-based Fe-containing particles generated by spraying ferrocene-doped diesel fuel in an oxy-hydrogen flame are tested and compared with a commercial carbon black powder for thermogravimetric analysis (TGA), secondary ion mass spectrometry (SIMS), Fourier-transform infrared spectroscopy (FTIR), Induced coupled plasma-Atomic emission spectroscopy (ICP-AES), and High-resolution transmission electron microscopy (HR-TEM). As a result, we found that a small amount of the ferrocene addition led to significant reductions in a on-set temperature and an activation energy of the carbon oxidation as well. An oxygenated surface complex forming at the particle surface could be thought as active species that would be readily consumed in particular at low temperature.

• 한국재료학회지
• /
• 제9권9호
• /
• pp.932-936
• /
• 1999

4NH(sub)3+$3O_2$$\longrightarrow$$2N_2$+$6H_2$O 의 화학반응식을 가지며$ O_2$ 및 $H_2$O를 산화제로 하는 $NH_3$/$O_2$산화의 성장모델을 세웠으며, 그 결과 Fick의 제 1 법칙을 기초로 하는 건식 및 습식 산화메카니즘으로 이해되는 Deal-Grove의 산화막 성장모델과 유사한 결과가 도출되었다. 이 성장모델에 의하면 산화제$ O_2$ 및 $H_2$O가 상호보완적으로 산화에 영향을 미치므로 산화온도 뿐 아니라 $NH_3$/O$_2$의 유량비도 산화율을 결정한다. rapid thermal processing(RTP)에 의한 산화막 성장실험으로 본 연구에서 제안하는 성장모델을 확인하였으며, NH$_3$분자의 분해에 의해 발생하는 N 원자의 산화막 내부확산을 secondary ion mass spectroscopy(SIMS)로 확인하였으며, Auger electron spectroscopy (AES) 측정결과 N 원자의 존재는 무시할만한 수준이었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.21-24
• /
• 2000

Ferroelectric YMnO$_3$thin films are excellent dielectric materials for high integrated ferroelectric random access memory (FRAM) with metal-ferroelectric-silicon field effect transistor (MFSFET) structure. In this study, YMnO$_3$thin films were etched with Cl$_2$/Ar gas chemistries in inductively coupled plasma (ICP). The maximum etch rate of YMnO$_3$thin films is 285 $\AA$/min under Cl$_2$/Ar of 10/0, 600 W/-200 V and 15 mTorr. The selectivities of YMnO$_3$over CeO$_2$and $Y_2$O$_3$are 2.85, 1.72, respectively. The results of x-ray photoelectron spectroscopy (XPS) reflect that Y is removed dominantly by chemical reaction between Y and Cl, while Mn is removed more effective by Ar ion bombardment than chemical reaction. The results of secondary ion mass spectrometer (SIMS) were equal to these of XPS. The etch profile of the etched YMnO$_3$film is approximately 65$^{\circ}$and free of residues at the sidewall.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.84-87
• /
• 2001

In this study, $CeO_2$ thin films were etched with a $CF_4/Ar$ gas combination in inductively coupled plasma (ICP), The maximum etch rate of $CeO_2$ thin films is $270{\AA}/min$under $CF_4/(CF_4+Ar)$ of 0.2, 600 W/-200 V, 15 mTorr, and $25^{\circ}C$. The selectivities of $CeO_2$ to PR and SBT are 0.21, 0.25. respectively. The surface reaction of the etched $CeO_2$ thin films was investigated with x-ray photoelectron spectroscopy (XPS). There is a chemical reaction between Ce and F, Compounds such as $Ce-F_x$ are remains on the surface of $CeO_2$ thin films. Those products can be removed by Ar ion bombardment effect, The results of secondary ion mass spectrometer (SIMS) were equal to these of XPS. Scanning electron microscopy (SEM) was used to examine etched profiles of $Ce-F_x$ thin films. The etch profile of over-etched $CeO_2$ films with the $0.5 {\mu}m$ line was approximately $65^{\circ}$.

• 한국전기전자재료학회논문지
• /
• 제15권7호
• /
• pp.570-575
• /
• 2002

$SrBi_2Ta_2O_9$ thin films were etched in $Cl_2/CF_4/Ar$ inductively coupled plasma (ICP). The maximum etch rate was 1300 ${\AA}/min$ at 900 W ICP power in Cl$_2$(20%)/$CF_4$(20%)/Ar(60%). As RF source power increased, radicals (F, Cl) and ion ($Ar^+$) increased. The influence of plasma induced damage during etching process was investigated in terms of P-E hysteresis loops, chemical states on the surface, surface morphology and phase of X-ray diffraction. The chemical states on the etched surface were investigated with X-ray spectroscopy and secondary ion mass spectrometry. After annealing $700^{\circ}C$ for 1 h in $O_2$ atmosphere, the decreased P-E hysteresises of the etched SBT thin films in Ar and $Cl_2/CF_4/Ar$ plasma were recovered.

• 전자공학회논문지A
• /
• 제30A권1호
• /
• pp.31-43
• /
• 1993

Thermal behavior and $O_{2}$ plasma effects on residue and penetrated impurities formed by reactive ion etching (RIE) in CHF$_{3}$/C$_{2}$F$_{6}$ have been investigated using X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS) techniques. Decomposition of polymer residue film begins between 200-300.deg. C, and above 400.deg. C carbon compound as graphite mainly forms by in-situ resistive heating. It reveals that thermal decomposition of residue can be completed by rapid thermal anneal above 800.deg. C under nitrogen atmosphere and out-diffusion of penetrated impurities is observed. The residue layer has been removed with $O_{2}$ plasma exposure of etched silicon and its chemical bonding states have been changed into F-O, C-O etc.. And $O_{2}$ plasma exposure results in the decrease of penetrated impurities.