• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.233-236
• /
• 2005

Phase noise in a phase-locked-loop (PLL) is unwanted and unavoidable. It is a main concern in oscillation system especially PLL. The phase noise is derived in term of power spectrum density by using a reliable phase noise model. There are four noise sources being considered in this paper, which are generated by reference oscillator, voltage controlled oscillator, filter, and main divider. The major concern for this paper is the noise from the filter. Two types of second order low pass filter are used in the PLL system. Applying the mathematical phase noise model, the output noises are compared. The total noise from the passive filter is lower than the active filter at the offset frequency range between 1 Hz to 33 kHz.

• 한국정보통신학회논문지
• /
• 제5권4호
• /
• pp.653-660
• /
• 2001

본 논문에서는 주파수합성기에서 가장 큰 잡음원인 VCO 및 각 단에서 발생하는 위상잡음 의 offset주파수에 따른 변화를 예측하기 위해 2303.15MHz의 주파수합성기를 설계하고 Lascari의 예측방법 을 이용하여 모델링 하였다. 또한, VCO에서 발생되는 여러 중첩 형태로 된 위상잡음중 저주파대역에서 문제가 되는 1/f noise를 3차 시스템에서 분석하였다. 3차 시스템에서는 해석이 복잡하므로 수학적인 분석을 통하여 1/f noise를 예측한다는 것이 어렵지만 pseudo-damping factor의 도입으로 3차 시스템에서의 1/f noise variance의 해석이 용이 하도록 시도하였고 이를 2차 시스템과 비교.분석하였다. 그 결과, tcxo의 경우 위상잡음이 루프 통과 전 10 kHz offset 주파수에서 -160dBc/Hz, 루프 통과 후 -162.6705dBc/Hz, 100 kHz offset 주파수에서 -180dBc/Hz, 루프 통과 후 -560dBc/Hz로 VCO의 위상잡음에 비해 offset주파수에 따라 루프 통과 후 급격히 감쇠 됨을 알 수 있었다. 2차와 3차 시스템에서의 잡음대역폭과 그 variance factor를 연관하여 3차 시스템에서 의 variance가 2차 시스템의 variance보다 크게 발생함을 알 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.180-185
• /
• 2000

본 논문에서는 주파수합성기에서 가장 큰 노이즈 Source인 VCO 및 각 단에서 발생하는 Phase Noise의 offset 주파수에 따른 변화를 예측하기위해 2303,15MHz의 주파수합성기를 설계하고 Lascari의 방법을 이용해 분석하였다. 그리고 VCO에서 발생되는 여러 중첩 형태로 된 Phase Noise중 저주파대역에서 문제가 되는 1/f Noise룰 3차 System에서 분석하였다. 3차 System에서는 해석이 복잡하므로 수학적인 분석을 통하여 1/f Noise를 예측한다는 것이 어렵지만 pseudo-damping factor의 도입으로 3차 시스템에서의 1/f Noise variance의 해석이 용이하도록 시도하였고 이를 2차 시스템과 비교하여 분석하였다.

• 대한전자공학회논문지
• /
• 제23권5호
• /
• pp.605-615
• /
• 1986

The phase-locked loop(PLL) is a communication receiver which operates as a coherent detector by continuously correcting the phase error. In this paper analysis for the Phase-error behavior of analog phase-locked loop (APLL) in the presence of additive white gaussian noise has been done theoretically and experimentally. A close form solution of the first-order loop is obtained and approximate solutions are derived for the second-order loops with RC, leadlag and perfect integrator filters. The perdormance of APLL's and their characteristics are also thoroughly investigated through experiments. In order to analyze the effect of the stochastic nature on nonlinear dynamics characteristics of the second order APLL, the phase error distribution and its variance have been obtained by using the Fokker-Planck equation. Theoretical results agree closely with those of experiment.

• International Journal of Ocean System Engineering
• /
• 제1권4호
• /
• pp.205-210
• /
• 2011

High data-rate underwater communications is demanded. This demand imposes stringent requirements on underwater communication equipment of phase-locked-loop (PLL). Phase noise in PLL is unwanted and unavoidable. In this paper, we investigate the PLL phase noise effect on high order QAM for underwater communication systems. The phase noise model using power spectral density is adopted for performance evaluation. The phase noise components considered in PLL are reference oscillator, voltage controlled oscillator (VCO), filter and divider. The filters in PLL noise are assumed to be second order active and passive low pass filters. Through simulation, we analyze the phase noise characteristics of the four components and then investigate the performance improvement factor of each component. Consequently, we derive specifications of VCO, phase detector, divider to meet performance requirement of high data-rate communication using QAM under phase noise influence.

• 환경영향평가
• /
• 제20권2호
• /
• pp.123-131
• /
• 2011

The objective of this study is to prepare the effective management plan of environmental noise with a noise map, and the guideline on the management plan of environmental noise was suggested through the review of existing application examples. The management plan of environmental noise with a noise map includes the practical contents in the stages of subdivision of management areas, establishment of reduction measures, opinion collection, post investigation, and reformulation of management plan. First, the classification of management regions is performed considering the excess degree of noise standard and the facility type in the phase of subdivision of management areas. Second, the optimal management plan is established through the investigation of regional characteristics and various noise reduction measures in the phase of establishment of reduction measures, which includes the examination of noise reduction effects with a noise map and the budget planning with the costing of noise reduction measures. Third, the opinion survey with a local resident and a expert is carried out in order to prove the validity of the management plan in the phase of opinion collection, and the management plan is modified with gathered opinions. Fourth, the post examination plan with noise measurement is performed in order to verify the real effect of noise reduction measures according to the management plan in the phase of post investigation. Finally, the amendment of the management plan as well as the improvement of a noise map is carried out at a regular cycle in the phase of reformulation of management plan.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.673-680
• /
• 2017

In the proposed paper, we designed low noise frequency synthesizer with compact size for Multi-Band. The proposed frequency synthesizer consists of fundamental frequency band(2 GHz) and harmonic frequency band(4 GHz). To improve the phase noise and spurious level of frequency synthesizer, we analyze how the configuration of frequency synthesizer affect the phase noise and design the multi-band's structure. The implemented frequency synthesizer reduce both the phase noise and spurious level. The phase noise is -92.17 dBc/Hz at 1 kHz frequency offset in 2 GHz and -90.50 dBc/Hz at 1 kHz frequency offset in 4 GHz. All spurious signals including fundamental frequency are suppressed at least 20 dBc than the second harmonic frequency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.352-357
• /
• 2014

Recently the construction of stations under railway lines and railway sections passing through central area of cities are increasing, calling for an urgent establishment of countermeasures against railway vibration and its subsequent second-phase noise. Of technology developed up to now, the most efficient countermeasure is the floating slab track, a track system isolated from the sub-structure by springs. Developed in this study, anti-vibration device for floating slab track (HLRM-High Load Rubber Mount) Haman station affiliated to the primary measurement was conducted in October 2012, one year after the second measurement after 2013 to be carried out in November and we want to change that. It is expected to raise awareness for the need of technology self-support and to make a meaningful contribution to mitigating vibration and noise produced by the next-generation high-speed railway.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.342-348
• /
• 2009

This paper introduces a novel denoising algorithm for the partial-discharge(PD) signals from power apparatuses. The developed algorithm includes three kinds of specific denoising sub-algorithms. The first sub-algorithm uses the fuzzy logic which classifies the noise types in the magnitude versus phase PD pattern. This sub-algorithm is especially effective in the rejection of the noise with high and constant magnitude. The second one is the method simply removing the pulses in the phase sections below the threshold count in the count versus phase pattern. This method is effective in removing the occasional high level noise pulses. The last denoising sub-algorithm uses the grouping characteristics of PD pulses in the 3D plot of the magnitude versus phase versus cycle. This special technique can remove the periodical noise pulses with varying magnitudes, which are very difficult to be removed by other denoising methods. Each of the sub-algorithm has different characteristic and shows different quality of the noise rejection. On that account, a parameter which numerically expresses the noise possessing degree of signal, is defined and evaluated. Using the parameter and above three sub-algorithms, an adaptive complex noise rejection algorithm for the on-line PD diagnosis system is developed. Proposed algorithm shows good performances in the various real PD signals measured from the power apparatuses in the Korean plants.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.101-106
• /
• 2005

This paper presents a new microwave oscillator incorporating a corrugated coplanar waveguide (CCPW) electromagnetic bandgap (EBG) structure as its terminating resonance component. The use of a compact CCPW EBG structure was effective in reducing the phase noise and improving the harmonic characteristics of the microwave oscillator circuit without additional backside processing and drastic size increment. The fully planar CCPW oscillator oscillating at the frequency of 5.41 GHz showed a phase noise characteristic of -90.7 dBc/Hz at 100kHz offset and a second harmonic suppression of 42.67 dB.