• 대기
• /
• 제17권1호
• /
• pp.87-99
• /
• 2007

Simulation results of Asian Dust Aerosol Model (ADAM) for the period of April 7-9, 2006 were analyzed, comparing with observed PM10 data. ADAM simulated around ten times lower than on-site PM10 concentration in the source regions: Zhurihe, Tongliao, Yushe, Dalian and Huimin. As the result of this low concentration, transported amounts of Asian Dust were under-estimated as well. In order to quantify a forecasting accuracy, Bias and RMSE were calculated. Even though remarkably negative Biases and high RMSEs were observed, ADAM simulation had followed well up the time of dust outbreak and a transported path. However, the emission process to generate dust from source regions requires a great enhancement. The PM10 concentration at the surface reached up to $2,300{\mu}gm^{-3}$ at Baeknyoungdo and Seoul (Mt. Gwanak), up to $1,750{\mu}gm^{-3}$ at KGAWO about 18:00 LST in April 8, respectively; however, ADAM did not simulate the same result on its second peak. It is considered that traveling Asian dust might have been lagged over the Korean peninsula by the blocking of surface high pressure. Moreover, the current RDAPS's 30 km grid resolution (which ADAM adopts as the meteorological input data) might not adequately represent small-scale atmospheric motions below planetary boundary layer.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1297-1301
• /
• 2013

This paper analyzes of PD occurrence position through an analysis of the arrival time difference between the GIS partial discharge signal. Because of GIS (Gas Insulated Switchgear) is a facility very important power equipment and as part of the equipment that make up the power system, the stabilization of the power industry, which accounted for 88.5% share of GIS substation in the form of a substation is an important equipment for power supply. In the situation where we are gradually expanding the need for preventive diagnosis in order to improve the efficiency of equipment management and failure prevention for Preventive diagnosis. In this paper as a method for extracting pre-defect of failure of GIS Apply the average value method of calculating the 5 times each using a pulse of the first time of the second pulse (${\Delta}t$) with an oscilloscope generation position PD(Partial Discharge). the results of GIS internal inspection, the partial discharge of the actual the position of the partial discharge was confirmed with an accuracy of about 82% of positions. Arrival time difference in the most effective manner if the partial discharge of GIS internal occurs by applying the averaging method and TOA(Time of arrival) method, the partial discharge occurs you through the measurement and analysis of PD signal occurs was confirmed in the experiment are presented and diagnostic methods location tracking.

• 한국염색가공학회지
• /
• 제21권5호
• /
• pp.41-50
• /
• 2009

Design of experiments (DoE) concept was successfully applied to determine the optimum processing conditions that yield maximum % exhaustion for berberine interaction with synthetic tanning agent pretreated polyamide substrates. The potential of synthetic tanning agent to provide anionic sites on the polyamide for berberine interaction which is cationic in nature was tested to increase the % exhaustion of berberine in this article. Experiments were designed according to Central Composite Rotatable Design (CCRD). The three factors for synthetic tanning agent pretreatment and two factors for berberine interaction each at five different levels, including central and axial points were considered. Experiments were conducted in a laboratory scale infra-red treatment instrument according to CCRD. For each response, second order polynomial models were developed using multiple linear regression analysis incorporating linear, interactions and squared effects of all variables and then optimized. The significance of the mathematical model developed was ascertained using Excel regression (solver) analysis module. Analysis of variance (ANOVA) was performed to check the adequacy and accuracy of the fitted models. The response surfaces and contour maps showing the interaction of process variables were constructed. Applying Monte Carlo simulation, response surface and contour plots, optimum operating conditions were found and at this optimum point, % exhaustion of 81% and 74% respectively for synthetic tanning agent pretreatment and berberine interaction were observed and subsequently the results were experimentally investigated.

• Earthquakes and Structures
• /
• 제12권2호
• /
• pp.165-175
• /
• 2017

This paper studies soil properties uncertainty and its implementation in the seismic response evaluation of structures. For this, response sensitivity of two 4- and 12-story RC shear walls to the soil properties uncertainty by considering soil structure interaction (SSI) effects is investigated. Beam on Nonlinear Winkler Foundation (BNWF) model is used for shallow foundation modeling and the uncertainty of soil properties is expanded to the foundation stiffness and strength parameters variability. Monte Carlo (MC) simulation technique is employed for probabilistic evaluations. By investigating the probabilistic evaluation results it's observed that as the soil and foundation become stiffer, the soil uncertainty is found to be less important in influencing the response variability. On the other hand, the soil uncertainty becomes more important as the foundation-structure system is expected to experience nonlinear behavior to more sever degree. Since full This paper studies soil properties uncertainty and its implementation in the seismic response evaluation of structures. For this, response sensitivity of two 4- and 12-story RC shear walls to the soil properties uncertainty by considering soil structure interaction (SSI) effects is investigated. Beam on Nonlinear Winkler Foundation (BNWF) model is used for shallow foundation modeling and the uncertainty of soil properties is expanded to the foundation stiffness and strength parameters variability. Monte Carlo (MC) simulation technique is employed for probabilistic evaluations. By investigating the probabilistic evaluation results it's observed that as the soil and foundation become stiffer, the soil uncertainty is found to be less important in influencing the response variability. On the other hand, the soil uncertainty becomes more important as the foundation-structure system is expected to experience nonlinear behavior to more sever degree. Since full probabilistic analysis methods like MC commonly are very time consuming, the feasibility of simple approximate methods' application including First Order Second Moment (FOSM) method and ASCE41 proposed approach for the soil uncertainty considerations is investigated. By comparing the results of the approximate methods with the results obtained from MC, it's observed that the results of both FOSM and ASCE41 methods are in good agreement with the results of MC simulation technique and they show acceptable accuracy in predicting the response variability.

• 한국수자원학회논문집
• /
• 제38권9호
• /
• pp.727-736
• /
• 2005

본 연구에서는 McCormack 기법의 2차 정확도 및 단순성의 장점과 불연속 흐름을 해석할 수 있는 상류이송기법의 장점을 결합하여 상류이송형 McCormack 기법을 새로이 개발하였다. 이 기법은 생성항을 효과적으로 처리할 수 있는 장점도 지니고 있다. 본 연구에서 개발된 기법을 해석해를 가진 가상적인 하도에 적용한 결과 기존 McCormack 기법에서 발생하던 수치진동없이 해석해를 잘 재현할 수 있는 것으로 나타났다. 또한 실제 하천에 대한 적용을 위해 하상과 하폭의 변화가 매우 심한 한강 하류구간에 적용한 결과 기존 McCormack 기법이 해석할 수 없는 정상류나 부정류를 모두 잘 해석할 수 있는 것으로 나타났다. 본 연구에서 개발한 상류이송형 McCormack 기법은 복잡한 자연하도의 흐름해석을 위해 효과적으로 사용될 수 있을 것으로 판단된다.

• Journal of information and communication convergence engineering
• /
• 제8권5호
• /
• pp.575-580
• /
• 2010

Eye gaze as a form of input was primarily developed for users who are unable to use usual interaction devices such as keyboard and the mouse; however, with the increasing accuracy in eye gaze detection with decreasing cost of development, it tends to be a practical interaction method for able-bodied users in soon future as well. This paper explores a low-cost, robust, rotation and illumination independent eye gaze system for gaze enhanced user interfaces. We introduce two brand-new algorithms for fast and sub-pixel precise pupil center detection and 2D Eye Gaze estimation by means of deformable template matching methodology. In this paper, we propose a new algorithm based on the deformable angular integral search algorithm based on minimum intensity value to localize eyeball (iris outer boundary) in gray scale eye region images. Basically, it finds the center of the pupil in order to use it in our second proposed algorithm which is about 2D eye gaze tracking. First, we detect the eye regions by means of Intel OpenCV AdaBoost Haar cascade classifiers and assign the approximate size of eyeball depending on the eye region size. Secondly, using DAISMI (Deformable Angular Integral Search by Minimum Intensity) algorithm, pupil center is detected. Then, by using the percentage of black pixels over eyeball circle area, we convert the image into binary (Black and white color) for being used in the next part: DTBGE (Deformable Template based 2D Gaze Estimation) algorithm. Finally, using DTBGE algorithm, initial pupil center coordinates are assigned and DTBGE creates new pupil center coordinates and estimates the final gaze directions and eyeball size. We have performed extensive experiments and achieved very encouraging results. Finally, we discuss the effectiveness of the proposed method through several experimental results.

• 한국초등과학교육학회지:초등과학교육
• /
• 제33권4호
• /
• pp.773-783
• /
• 2014

In National Curriculum of Science revised in 2007, the Free Inquiry was newly introduced to increase students' interest in science and to foster creativity by having students make their own question and find answer by themselves. The purpose of the study was to analyze characteristics, in cognitive domain, appeared in the processes of performing the Free Inquiry activities applying a brain-based evolutionary science teaching and learning principles. For this study, 106 fifth grade students participated, and they performed individually Free Inquiry activities. In order to characterize of the diversifying, estimating-evaluating-executing, and extending-applying activities in cognitive domain (C-DEF), the Free Inquiry diary constructed by the students, observations by a researcher, and interviews with the students were analyzed both quantitatively and qualitatively. The major results of this study were as follows: First, at C-D step, many students (71.5%) had difficulty in searching the meanings of their results and the contents of interpretations were at the level of simple description of their results. A few students (15.2%) derived interpretations based on causal relationships between specific variable and result. Also, the tendency that the numbers of interpretation about meaning of their results were increased as the scores of science attitude and achievement was appeared. Second, at C-E step, the students showed tendency of considering facts exactly explaining inquiry topic and being appliable to daily life rather than objectivity or accuracy of scientific knowledge. Third, at C-F step, there were three types of extension and application: simple repetition (8.2%), extension (64.0%), and upward application (17.6%) types. Based on these findings, implications for supporting appropriate interpretation, evaluation, and application of inquiry results are discussed.

• 대한전자공학회논문지SP
• /
• 제41권5호
• /
• pp.175-183
• /
• 2004

본 논문은 적외선 파장대의 벽화 밑그림영상과 가시광선 파장대의 패턴영상을 이용한 다중영상 정합 기법과 적응적 중첩영역 병합 기법을 이용하여 고해상도 적외선 벽화 밑그림 영상을 생성하기위한 영상 모자익 기법을 제안한다. 기존의 영상 모자익 기법은 특징이 없는 대상에 대해서 정합을 적용하기가 힘들었다 그리고 중첩영역의 크기에 따라 정합과 병합의 오차가 상반되는 현상이 발생한다. 이러한 문제를 해결하기 위해 본 논문에서는 첫 번째로, 영상에서 주목할 만한 특징이 없는 경우에도 프론젝터를 사용하여 패턴영상을 획득하고 의사 칼라 영상을 획득하여 정합을 가능하게 하였다. 두 번째, 인접한 영상간의 최소 병합 오차를 가지는 중첩영역을 찾아서 그 영역에 대해서만 병합을 수행함으로서 흐림현상을 해결하였다. 결과적으로 제안한 방법이 기존의 모자익 방법보다 더 효과적이고 효율적인 것을 확인하였고, 또한 적외선 벽화 밑그림 영상의 모자익에 더 적당한 것을 확인하였다. 실험 결과는 이 알고리듬의 강건함과 정확성을 보여준다.

• Asia pacific journal of information systems
• /
• 제9권3호
• /
• pp.159-175
• /
• 1999

For the past decade, although there have been many studies which examined factors influencing the extent of EDI systems implementation, it is very hard to find out studies which directly investigated what the effectiveness of EDI systems are, and which factors contribute to the successful implementation of EDI systems. In this regard, this research aims to explore for the factors which constitute the effectiveness of EDI systems as perceived, based on a survey from 202 companies. The major steps of the current research are as follows. First, in order to identify important factors constituting the effectiveness of EDI systems, previous research related to the effectiveness of EDI systems was reviewed and analyzed. Second, individual items which can be considered as candidates to represent the effectiveness of EDI systems were derived from this previous research review, and a survey questionnaire was developed using those derived items. Based on the developed survey questionnaire, a pretest was administered at several domestic business firms with experiences of EDI systems. Third, survey questionnaires were distributed to and collected from the 202 companies which experienced EDI implementation. Accordingly, this research derived out five factors constituting the effectiveness of EDI systems from the result of a multivariate data analysis: strategic advantage, time reduction in business process, accuracy improvement, cost reduction, and improvement of business process quality. It was also interesting to find that the factors of EDI effectiveness are divided into three levels, similarly to three levels of the Anthony's hierarchical model of organization(Anthony, 1965): strategic, managerial, and operational levels. Furthermore, from the levels of derived factors, we developed a conceptual model which explains the possible causal relations of those factors in a hierarchical manner.

• Advances in Computational Design
• /
• 제5권4호
• /
• pp.363-380
• /
• 2020

In this paper, a cylindrical shell is immersed in a non-viscous fluid using first order shell theory of Sander. These equations are partial differential equations which are solved by approximate technique. Robust and efficient techniques are favored to get precise results. Employment of the Rayleigh-Ritz procedure gives birth to the shell frequency equation. Use of acoustic wave equation is done to incorporate the sound pressure produced in a fluid. Hankel's functions of second kind designate the fluid influence. Mathematically the integral form of the Lagrange energy functional is converted into a set of three partial differential equations. Throughout the computation, simply supported edge condition is used. Expressions for modal displacement functions, the three unknown functions are supposed in such way that the axial, circumferential and time variables are separated by the product method. Comparison is made for empty and fluid-filled cylindrical shell with circumferential wave number, length- and height-radius ratios, it is found that the fluid-filled frequencies are lower than that of without fluid. To generate the fundamental natural frequencies and for better accuracy and effectiveness, the computer software MATLAB is used.